Only a machinist can understand the love of that "pop" sound of a well drilled hole.
@mrraimundo130
Жыл бұрын
Give your cameraman and editor a raise, this is super cinematography! Also that behind the scenes at the end is hilarious :D
@slamhammer2003
Жыл бұрын
RIGHT!!! That's exactly what I would do if my hole came out that *chefs kiss* perfect size
@renegade2248
Жыл бұрын
Just had my first day in a machine shop at 27 and was blown away. I come from a construction background and made a career change and have never been happier.
@wretchedsinnerRighteousSavior
Жыл бұрын
Did you have any experience? I'd love to get started but have zero experience and don't know where to start
@gulch1969
Жыл бұрын
Jesse, your videos and Tyson's videos are the best. You're not trying to be extreme over-the-top like a couple of other people.
@Jessie_Smith
Жыл бұрын
Thank you. We all are trying to educate but also try to make it fun and entertaining at the same time.
@andrewkelly2863
Жыл бұрын
#teambarry
@barrysetzer
Жыл бұрын
@@andrewkelly2863 #YESSSSSSSS!
@hunterphillips9032
Жыл бұрын
@@barrysetzer keep the content coming big guy!!!! Love the vids
@Jessie_Smith
Жыл бұрын
@@andrewkelly2863 don’t encourage him. Barry is the worst. Lol (only kidding). Oddly I’m team Barry to
@jamstagerable
Жыл бұрын
Hilarious that he didn't need to fake an accent when he put that mullet wig on and went into character😂🤣 Edit: Written in my Boston accent😅
@Jessie_Smith
Жыл бұрын
LOL tell me about it 🤣
@jamstagerable
Жыл бұрын
@@Jessie_Smith Dude, that had me ROTFL 😆 Love all the videos brother.✌🏾
@Jessie_Smith
Жыл бұрын
@@jamstagerable Thanks man! really appreciate it!
@motionsick
Жыл бұрын
Top G's of CNC. It's been enjoyable watching the production quality increase over the years. This is grade A content for nerds.
@Jessie_Smith
Жыл бұрын
Thank you!
Жыл бұрын
Flat bottom drills, You make the rocking world go 'round
@BPond7
Жыл бұрын
😂 I was singing that to myself just the other day!
@Jessie_Smith
Жыл бұрын
LOL that is gold!
@motormaker
Жыл бұрын
I was looking for this comment. Good job.
@richhuntsd12
Жыл бұрын
Very cool. I was not even aware of those drills but I will definitely check them out. I have used flat bottom spade drills but not the Go drill. Thanks Jesse
@marktatara9545
Жыл бұрын
Great video! Awesome skills explained mixed in with comedy! BOOM! Put a smile on the face! Love watching you guys! Have a great day everyone.
@Jessie_Smith
Жыл бұрын
Glad you enjoyed it. That's exactly what we try to do. Educate and make it enjoyable at the same time.
@lim3920
Жыл бұрын
That pop-up pin sounds truly amazing,BOOM
@Webnicity
Жыл бұрын
You guys are awesome, I learn so much from your videos...even if I'm just using a diy cnc. Knowledge is power!
@Tomasso2009
Жыл бұрын
In the end I expecteted Donnie sayin' "you perv", but the look did that much better )))
@andrden6440
4 ай бұрын
The last bit is hilarious 😅😅😅
@428Mario
Жыл бұрын
Great tutorial, seriously impressed by the size accuracy
@FreeKnowledge1111
Жыл бұрын
BEAU NOGOH IS BACK! We need to get another episode of him 😂😂😂
@donniehinske
Жыл бұрын
I AGREE 100%!!!!!
@machocamacho9544
Жыл бұрын
An old man once told me what you have there is called a honeymoon fit😂
@timothykraft4909
Жыл бұрын
Awesome Video Jessie! All you all got the experience of a lifetime with the one and only Machinist & Extraordinaire! Bo No Go! 🤣🤣🤣I'm voten fir Bo No Go as President!
@Jessie_Smith
Жыл бұрын
I think Bo could get the swamp in DC straightened out! lol
@rexmundi8154
Жыл бұрын
A video of me furiously pushing the feed % up / down button while drilling with an endmill would be less entertaining but more accurate to real world conditions. Which isn’t to say y’all aren’t real world. You just have a really nice shop, deep tool pockets, and time to make videos. I’ve got 5 different drill indexes of various completeness and a bucket / drawer of misfits and stragglers. Good luck getting the boss to pony up for fancy drills.
@ronblack7870
Жыл бұрын
as far as i can tell they no longer run production jobs. just some spacecraft stuff here and there and otherwise they make videos. i speculate they get the machines on loan as promotional equipment.
@MrMBinder
Жыл бұрын
6:18 That sound when you pull a pin out of a hole is 👌 When you can use the air in the bottom of the hole as a spring and bounce the pin up and down, on the other hand... 😘👌
@chadmaurer4002
Жыл бұрын
Happy to see Bo NO-GO back in front of the camera, In all seriousness, keep up the great work guys!
@Jessie_Smith
Жыл бұрын
Yeah someone left the door open and he found his way back inside 🤣
@chadmaurer4002
Жыл бұрын
LOL
@generalinformation2159
Жыл бұрын
Great video! Learned something new.
@nathanthomas8184
Жыл бұрын
600k ya deserve MORE subs Donnie was excited with that LOOK Titan academy BOOMING
@Chris-kk8xg
Жыл бұрын
nice new 5 axis mill you walk by at the end.
@tomirvin2115
Жыл бұрын
Flat bottomed drills make my rock and roll world go round.
@davecox8922
Жыл бұрын
Loved this - Gotta stay for the ending hahahaha! 🤣
@thecarl168
Жыл бұрын
nice pop sound when testing hole size good machining !
@garrettmack3188
Жыл бұрын
Nachi flat bottom carbide drills work fantastic at plunging different angles also.
@85CEKR
Жыл бұрын
Great video, there was a couple of important points I thought you were going to ignore but you got to all of them.
@Jessie_Smith
Жыл бұрын
Thank you!
@Spartanerx42
Жыл бұрын
i use a flat drill now for 5 years they amazing, from yg-1 that are not so new but the most didn now they exist
@matyasiadam4656
Жыл бұрын
You guy's are the best! Video quality and style great! AND THE INFORMATIONIS IS PRICELESS!
@steveanderson4768
Жыл бұрын
Mullet boy I was impressed I really was the technology specific applications for this stuff is just mind blowing to me I’d love to see what this technology is going to be in 20 more years
@pdcaengineeringsolutions5306
Жыл бұрын
These are a great application on bigger applications , but for smaller holes check out the micron crosspilot drill ,these can drill down to small sizes on steep inclines with no deflection, because the hole may not be a through hole and may have a drill point, and they can drill 10xD
@crazycooterMN
Жыл бұрын
Pilot with a ball endmill too if all you need is to reduce deflection. Just get one close to your drill size.
@alt5494
Жыл бұрын
Thanks hadn't heard of these drills.
@willyharris4199
Жыл бұрын
What’s the tool life like on these flat bottomed holes compared to a regular pointed drill? I’d presume it’d be higher wear amount on the tool because of the 90 degree edges
@Jessie_Smith
Жыл бұрын
Like anything it depends on the situation that you're putting the drill in but the tool life will surprise you. We used these at my last job and the tool life was way better than the endmills we were trying to use.
@feedbackzaloop
Жыл бұрын
@@Jessie_Smith but flat bottom drill IS an endmill... Maybe your experience was due to the change in tool manufacturer?
@jamstagerable
Жыл бұрын
@@feedbackzaloop A flat bottom drill is designed for plunge cutting only.
@feedbackzaloop
Жыл бұрын
@@jamstagerable yeah, just like the endmills in their early days. Considering popularity of plunge milling for HPC the difference between modern mill and flat drill is negligible: front face cutters do all job.
@edgeofentropy3492
Жыл бұрын
Oh yeah, I used those before. The problem that I ran into was the drill substrate. We were using the "glass metal" fb drills. So when you wanted to drill on an angled surface on steel, you had to peck drill about .001" increments. I found this out after breaking a couple of them. I think that I would have been better off, and safer, to circle mill a flat then continue drilling.
@florianpohl3735
Жыл бұрын
Nice Editing and good information guys. I like that there is no boom. 😜 Also i like that you pointed out the circumstances of the method. I just like to say that this method will reduce your toollive. Nicely done
@martinmarkmarkovics7754
Жыл бұрын
When we have a flat end in the hole, we drilling with a regular drill first, and then we finish it on the last 3-4 millimeters with a flat drill (depth dependening on the diameter). The flat drills tends to collect more chip, which we have to pull down in every 20-30 minutes working with stainless...
@KenPurcell
Жыл бұрын
Barry's biscuits are burning!
@Jessie_Smith
Жыл бұрын
LOL his biscuits have been burnt for awhile!
@knuckle5911
Жыл бұрын
Barry and Jesse i think you should to fight a duel to see who makes the bigger chips 😂
@anthonyalbillar-montez5946
Жыл бұрын
You sort of remind me of my old busy Jet Jackson from Oklahoma.
@donniehinske
Жыл бұрын
Awesome video Jessie! Need to get me some of them drills
@garethgwilliam
Жыл бұрын
I'd love to know how well these hold positional tolerance? The logic being that if your flat spot drifts it's unlikely to cause the drill to wander as the point is still starting somewhere on the flat, where as with a flat bottom drill because it's cutting on one side the stiffness of the tool probably comes into play with regards to the tool pushing off. I'd guess it would depend on diameter? The diameter tools like the ones in the video are pretty stiff, so it's probably not an issue.
@akagivmusic
Жыл бұрын
my thought exactly, he didn't even show the position and how much it is in the tolerances because smaller flat drills will go off center nonetheless in such a angle until I see any prove that the position tolerances are met with this technic aswell I trust this video with a grain of salt ngl...
@robertmizek3315
Жыл бұрын
Well done!
@299kmh9
Жыл бұрын
i love the sound of a caliber 🤌🏼👉🏻plub🤤👉🏻👌🏻😆
@yushinandrew
Жыл бұрын
Hello. Great video! But why have you stopped showing us feeds and speeds?
@Tomek97cz
Жыл бұрын
Almost thought that poking Berry woudnt be there :D nice
@tdg911
Жыл бұрын
Hahahaha beaux nogo. Good stuff as always. Love me some Godrills. Much love and gratitude
@Jessie_Smith
Жыл бұрын
Thank you!
@archie3537
Жыл бұрын
Great experience
@g576758
Жыл бұрын
Great video and it's tight lol pop have a good one guys 😮
@afelias
Жыл бұрын
Cool. So the right drill bit is a better solution than trying to add extra steps to make it easier to drill with less-optimal bits. I don't do CNC, but this side of engineering's really cool. Though, how do you figure out how much to step down the drill speed, and for how long before you know it's making full contact? Is that entirely because of prior experience, confirmed by a little trial and error? Is it tool-assisted where your program has presets? Or is there prior information with how the drill bit is spec'ed?
@angrydragonslayer
Жыл бұрын
Probably a bit of all of them at the same time
@Jessie_Smith
Жыл бұрын
If you're looking to cut cycle time or an extra tool then using a flat bottom drill in these situations can be a better option. As you see in the video I am leaving the RPM the same but reducing the feedrate by 30% to enter the holes. That number came from Kennametal as the starting recommendation. With any tool like this or out-of-the-norm process, the manufacturer will have some basic guidelines as starting values. I always try to use those first and then build from there depending on how it works out. So my best advise it to take the available information (because it's free and someone has already done the research) and also your experience and use those as a starting point and then build from there.
@RIANRBRCHANNEL
Жыл бұрын
Great vidio thank you for sharing very good
@sbtl8888
Жыл бұрын
Great video on methods to drill angled holes. Any tips on how to make sure the location and depth of the holes are to spec? preferably w/ out a cmm?
@jmowreader9555
Жыл бұрын
Jessie, I do believe you just laid out almost all the issues involved with drilling a bowling ball, except for what it's made of.
@Mirage5892
Жыл бұрын
I just looked through Kennametal's offerings on flat bottom drills and I can't find one that goes deep enough. All their offerings are 3xD and I need at least 3.5 or 4xD for my particular projects. Just over 9/16ths hole at 1.925" depth with a flat bottom.
@AraniaTwoFer
Жыл бұрын
6:06 sounds very nice! Quick question, though. You haven't chamfered the edges of the holes at all. Doesn't the burr throw off your measurements with the gauges?
@CPTFiXtion
Жыл бұрын
That face you make when that 500 pin just sliiiiiides right in
@nayanikah.d.2718
Жыл бұрын
How to drilling and tapping on 3/4" ball's 120* . three hole
@travisbreeden9393
Жыл бұрын
So how was the cmm?
@Patrik1526889900
Жыл бұрын
How do you do the feed reduction in a mastercam drill operation? or did you just longhand write it?
@Honda-hs2hp
Жыл бұрын
What about deep holes ? Do they make long flat bottom drills ?
@cncmanufacturingptyltd5189
Жыл бұрын
How do you reduce feed in Mastercam by 30% to correct depth?
@wilsonrawlin8547
Жыл бұрын
Always thought flat faced drills are the way to go in the long run for clean starts/openings. Especially for any hole not at a 90 on a flat surface.
@janbutz5169
Жыл бұрын
it would be cool to see it beeing measured. i wanna see youre machines :DD
@johnbrennan3735
Жыл бұрын
Two questions: 1. I understand decreasing 30% until the whole bit is engaged with the work. I'm curious why you decrease by 30% when you're exiting the piece on the opposite side? 2. What is the difference between a flat bottom drill and a center cutting end mill? Thanks.
@khaaosz
Жыл бұрын
1. The same reason when entering the hole; to reduce/eliminate the change of the drill chipping when entering or in this case exiting uneven surfaces, plus less burrs around the edge of the hole. 2. well, with a drill you can only drill, and with an end-mill you can still drill, ( though certainly not as fast as with a drill) plus do other stuff while at it.
@supremecommander2398
Жыл бұрын
oh, angled holes... for some reasons 90% of our client toolmakers hate them. especially holes like that last deep hole there that is angled in two directions to the cardinal axis, even more if that require drills in the category of 40xD 😁 I wonder what comes next? The difference between milling an O-Ring groove, or using an O-Ring-countersink ?
@1SUNGODELBASIR
Жыл бұрын
Awesomeness
@Kardos55
Жыл бұрын
"If you are a machinist, chances are you already know how to drill a hole." - not all holes are created equal.
@ensen89
Жыл бұрын
That is a really nice invention, but in some situations I use the drill cone at the bottom of blind holes for clearance. Would be an unpleasant surprise during assembly if that was left out by this drill.
@angrydragonslayer
Жыл бұрын
Then you'd need to consider that change while programming
@ensen89
Жыл бұрын
@@angrydragonslayer True.... in a perfect world ;) I make the drawing and 3d model, than another department sents that to a job shop and they make the part often without ever talking to me. If they don't call and ask if flat bottom blind holes are ok - and why would they ask that, because it usually is ok and nobody cares - the parts come back to us and then someone from assembly department calls me because my parts don't fit together. Maybe actively using that drill bit tip cone as a feature for clearance isn't such a good idea after all.
@angrydragonslayer
Жыл бұрын
@@ensen89 well, it isn't and in your scenario, it's far from ideal.
@qcandrew
Жыл бұрын
There are cases where a flat bottom is required by design, maybe underneath the holes where it normally exits is empty space and the engineer wants to maintain a wall thickness that the drill cone would thin.
@frejdroid
Жыл бұрын
What if i need to drill 25X diameter? Im having alot of trouble drilling 4mm at 75 degrees angle.
@jaymgil
Жыл бұрын
I just saw the octopus in this video. Where's the finishing video for that?
@daveyt4802
Жыл бұрын
How in the #$&@ do they put the coolant holes in those drill bits?? 😳
@bash25
Жыл бұрын
Hey I was kinda wondering how you got your start in t he cnc space, becasue I'm just a high schooler who was trying to become a machinest. I have been using cad since 6th grade and am very good at 3d printing parts and wood work. I kinda figured out how to make tool paths in fusion and am learing how to use a cnc router at my school. I just don't really know where to go from here.
@TITANSofCNC
Жыл бұрын
We have an academy online where you can learn our curriculum for free at academy.titansofcnc.com Reach out to our team on there if you have any other questions. Awesome to hear you're interested in becoming a machinist. You came to the right place!
@senorimotor
Жыл бұрын
Is the posted GCode a Seq of G01s with the feed changes or does Doosan have a CAN cycle to address that?
@Jessie_Smith
Жыл бұрын
Since I used Mastercams 'Advanced Drill' toolpath it didn't output any canned cycle so it was straight G-code with the feed changes.
@alexmauger7033
Жыл бұрын
That little popping sound when you pull out the 0.500"... Mmmm...
@efeaydeniz327
Жыл бұрын
That is perfect
@sicbane6700
Жыл бұрын
Why not mill the holes
@trevorgoforth8963
Жыл бұрын
Milling the holes would be much slower in a production setting.
@mcolossi
Жыл бұрын
ASSUMETEMI PLEASE😛🇮🇹
@zimbab5748
Жыл бұрын
Barry!! Barry!! Barrry!!!
@barrysetzer
Жыл бұрын
Zim Bab!! Zim Bab!! Zim Bab!!! 😆
@telescopereplicator
Жыл бұрын
Why not drill the holes first, and THEN mill the rough part into the desired shape...?
@ronblack7870
Жыл бұрын
because it's not a part. it's a demonstration piece for the video. he said that.
@mam72no2
Жыл бұрын
I’m still confused why you wouldn’t just mill the start of the hole considering as it only takes a few seconds and can cater for multiple hole sizes whereas a flat bottomed drill wouldn’t
@jacks19822
Жыл бұрын
hmmmm.. lmao, kids loved it.
@Budabaii
Жыл бұрын
Rip Barry Setzer.
@barrysetzer
Жыл бұрын
LOL I am still here!
@bdm9574
7 ай бұрын
hairstyle-NO GO guy
@feedbackzaloop
Жыл бұрын
Too bad you did not check flatness and perpindicularity of counterbores. Efficiency doesn't pay that much if you need to use a counterbore mill anyway.
@thomaskirkpatrick4031
Жыл бұрын
I had no idea that you guys that are lucky enough to have a CNC machine had to contend with a problem like these holes. I thought the machine could just do it?
@petermichaelgreen
Жыл бұрын
CNC machines enable tool paths that would be impractical to do on a manual machine and save labour on complex or repetitive jobs.. but it's still up to a human to decide what tools to use, in what order and with what feeds and speeds. There are nearly always multiple options, you could mill a flat with an endmill and use a regular drill, you could cut the entire hole with the endmill if it's not too deep. Each option will have tradeoffs in speed, quality, tool slots used on the machine, and whether or not you have to buy new tooling or can run what you already have.
@Eggugat
Жыл бұрын
Now how do we do it without the $800,000 machine?
@gbuie
Жыл бұрын
What if your hole has a hole??? ;)
@klasjanzen1165
Жыл бұрын
Yeah, first you need a cnc to make toolchange quick and automated. Now you need this drill to eliminate toolchange . What's next?
@SimonPEdwards63
Жыл бұрын
A lot of Titans videos are BS which is why I unsubscribed. This is definitely worth watching.
@TITANSofCNC
Жыл бұрын
With like 1300 videos on KZitem … you can’t win them all. We definitely try to keep things exciting and at times go to the extremes to show the boundaries are much further away than we thought… which allows machinists to have confidence in pushing their tools which equals a better profit… at other times we explain process… and other times do full part tutorials… and at other times we tell real machinists stories so others can learn from our experience. All in all… we’re driving thousands and thousands of kids to machining who otherwise wouldn’t know what it is and we’re helping companies compete and make money. Many channels die because they do the same thing every day and don’t come up with new ideas… We’re always pushing and learning… and adjusting… just like we do in the machine shop. Sorry you unsubscribed but… thanks for the positive comment. Our loyal subscribers help us build a platform that reaches the otherwise… un-reachable.
@ronblack7870
Жыл бұрын
@@TITANSofCNC do you actually run any production? that would impress me. i believe you guys only make videos these days and sell stuff in your store. running high production is really hard. doing one offs with new machines and new tooling is puff work. do you even own the machines? or are they on loan as advertising for the makers?
@timjohnson8725
Жыл бұрын
Dude sounds like he's from young Sheldon....
@ryanclarke2161
Жыл бұрын
This channel doesn't get the views it deserves
@RichardDowd
Жыл бұрын
Isn't that just a slot drill?
@GodisGood584
Жыл бұрын
Haha
@hoppercar
Жыл бұрын
To.much talking
@dannybartlett4225
Жыл бұрын
Soild works lool take away there cad tools 🔧 is there anyone there that could wright a program of the top of there head like the old school operator's do still today i no guys that refuse point blank to waste time in cad will stand at the machine and program rgt of the top of there heads walking cad loool
@xExekut3x
Жыл бұрын
"i'll show you how to do it using one tool" ... PROCEEDS TO USE A LOT OF DIFFERENT TOOLS .. fn always, man .. ALWAYS with this kind of BS
@barrysetzer
Жыл бұрын
He literally used ONE tool, a flat bottom drill.
@xExekut3x
Жыл бұрын
@@barrysetzer he literally used an advanced machine with multiple interchangeable parts, which he did change out some during the video... he used a computer to simulate it all... wtf are you smoking?
@barrysetzer
Жыл бұрын
@@xExekut3x The tool is the drill, I see you are clearly not a machinist.
@83hjf
Жыл бұрын
the teachings are cool, but the video production is way over the top. please, dial it down a notch. it just looks like trash TV. the "walk and pan" shots are completely unnecessary and distracting. that's not to say you should do boring corporate videos, but the "IN YOUR FACE" big-buck TV production style is off-putting
@thesuperjed1
Жыл бұрын
I disagree, this episode was funny as hell! You need to lighten up son
@83hjf
Жыл бұрын
@@thesuperjed1 i'm not talking about the content, i'm talking about the shots and the over the top camera work. you don't need to be moving the camera all the time.
@Jimiyohanson
Жыл бұрын
nope
@euclid9718
Жыл бұрын
Is it an advertisement for Kennametal FBD drills? We tried them on Inconel 718 and compared with angled tip drills they showed themselves pretty poor, especially positioning.
@Sara-TOC
Жыл бұрын
Hi! Could you please provide more information; What were your speeds and feeds? Did you use Kennametal’s NOVO app for reference?
Пікірлер: 157