🔥 We have head studs for many different make, model and year trucks! Order yours today! www.thoroughbreddiesel.com/brands/arp/
@damonrice8469
Ай бұрын
@@thoroughbreddiesel iv worked in Diesel Ford shop for 23.5 years . Today i just picked up my first own 6 0 truck. I have been driving a 96 f250 7.3. The truck needs head gaskets, so im doing all the work myself.studs, standpipes, stc bracket, an anymore upgrades it may need. I love watchin your channel.
@freedomisntfree131
3 ай бұрын
Thanks for this video.
@thoroughbreddiesel
3 ай бұрын
You're welcome.
@JoseGonzalez-zh8tw
Ай бұрын
Very great 👍 job
@thoroughbreddiesel
Ай бұрын
Thank you! Cheers!
@mikemurphy9953
7 ай бұрын
Wade, great video... I watch all your stuff. Question, I believe, or at least it appears that my rocker box gasket is leaking where it mates to the cylinder head a bit on both sides of the block closest to the firewall. Can I remove and then replace the rocker box without having to remove the 5, 10 metric 8's bolts on the top side of the rocker box that thread into the cylinder head?
@thoroughbreddiesel
7 ай бұрын
I am pretty positive that those bolts will have to be removed to get the rocker box off unfortunately.
@volvotwoseries3384
5 ай бұрын
In your driveway.... where you happen to have a crane to remove the cab.... I'm buying one of these tomorrow, time to get some pricing on this job.
@thoroughbreddiesel
5 ай бұрын
😂
@royanguiano2610
Жыл бұрын
Do you have a video of removing the cab??
@thoroughbreddiesel
Жыл бұрын
No, but maybe soon.
@jasonbissell9738
Жыл бұрын
GONNA HAVE A HARD TIME WITH THOSE FUEL LINES. THEY ARE VERY HARD TO RUN IN THE RIGHT SPOT AFTER THE HEAD IS INSTALLED
@semackranch2151
Жыл бұрын
Curious why you would prefer an impact socket over a chrome one
@thoroughbreddiesel
Жыл бұрын
It is a high torque value that you go to, and a impact socket is designed to handle higher torques that are applied via impact guns, etc.
@patrickwelch620
Жыл бұрын
Great video. Did you use a specific brand gasket on your rocker box/head or any grey rtv. I am doing this job bc of a leak and I don't want to do it twice. Lol.
@thoroughbreddiesel
Жыл бұрын
We used the Mahle gasket here that was included with the top end kit.
@333Roulette
3 ай бұрын
So is there a way to remove a rocker arm that’s bad/broken without removing a headbolt???
@thoroughbreddiesel
2 ай бұрын
No
@sublime12201
Жыл бұрын
Was in the 6.0 game.. but I gotta say....feels a lot better being in the 6.7 game..😆
@ericfusa
7 ай бұрын
Is it pretty easy to just install your head studs if the stock HG are still ok? With the cab on?
@thoroughbreddiesel
7 ай бұрын
Yes, but give us a call if you have a question.
@hinds90
2 ай бұрын
@@thoroughbreddiesel assuming 1 stud at a time in the correct order of course?
@TheCustomEverythingChannel
9 ай бұрын
To bullet proof a 6.0 whats something like that cost ?
@thoroughbreddiesel
9 ай бұрын
Give us a call 1-859-737-4966.
@royanguiano2610
Жыл бұрын
Can these cylinder heads be performed in the cab as well can the heads be mounted first before the studs or do the studs needs to be installed before the head. Because I don’t really sis a big difference in it really.
@thoroughbreddiesel
Жыл бұрын
If you leave the cab on, the heads will go on first and then the studs will be installed.
@damonrice8469
Ай бұрын
@@thoroughbreddieselThe studs thats hard to get to needs to be in the cyl head before u sit it on the block, i use a cut piece of hose to keep the stud just above the cyl head surface when reinstalling the head.
@eusebiogarciaii8137
11 ай бұрын
I’m hoping to find someone who can tell me how to remove a broken standpipe from a 6.0 power stroke F250.
@thoroughbreddiesel
11 ай бұрын
I hope someone can here too. Depending on how deep it is you may need to go ahead and pull the head.
@damonrice8469
Ай бұрын
Depend on how broken he is sayin it is. Iv used neddle nos vice grips to get the stuck ones out before.@@thoroughbreddiesel
@richardhood8568
Жыл бұрын
Do you ever get "spring-back" when torquing the nuts? Mine are lubed and still want to spring back about a 1/16".
@thoroughbreddiesel
Жыл бұрын
Lube on the threads is probably causing this.
@travisellison2206
Жыл бұрын
how hard is this to do with the cab/body in place
@thoroughbreddiesel
Жыл бұрын
Its not bad at all, can be done either way. The key is getting all of the cab bolts out.
@gtijoemcnair
Жыл бұрын
Ive done nothing but torque to yeild, a 210 foot pound final seems too loose? I am about to do my own truck and really tempted to go back with OEM. A friend of mine whos done head studs says every time hes gone back into a head gasket it was studed? So lets start a discussion. Studs or torque to yeild? Im only running 300 to 400 hp. And i just don’t believe 210 final will hold
@michaelplemons3688
Жыл бұрын
Gator studs. Comp series 265ft lbs on head studs and will never had another issue
Пікірлер: 37