TIPS & TRICKS - WOOD GRIPS FOR ASG DAN WESSON 715 | AIRSOFT
I woke up this morning and realized that I got wood. So let’s take a closer look at it!
In this episode I will change the factory ASG rubberized grips to new wood grips for a more old-school look.
Share this video: • TIPS & TRICKS - WOOD G...
Order your own wood grips here:
/ kimpoishop
If you don't have a Facebook account, email:
kimpoishop@gmail.com
STEP 1: SAFETY CHECK
I start with a safety check. Opening the drum to make sure it’s empty.
And remove the old, left, rubberized grip panel to make sure there’s no CO2 capsule in the gun.
STEP 2: DISASSEMBLY
The right grip panel is attached with 4 screws, which I remove.
Freeing my gun from this rubberized abomination.
STEP 3: NEW WOOD GRIPS
Ready for the new Kimpoi Shop wood grips!
FULL DISCLOSURE:
I got a discount on these grips, just so everything is on the level.
The packaging is very clear, has specific model information, and there is also a notice telling us “this product was made by hand” and that some modification may be required for perfect fit and finish.
The box reveals the wood grips themselves, and two screws with machine threads in a plastic baggie.
And a free patch, of commercial nature...
STEP 4: INSTALLATION
Now to install these grips.
I start by inserting a c02 capsule into the revolver.
Then I mock up the grips on my Dan Wesson 715 to make sure the holes line up without any interference.
They fit, so I add the left grip and screw them into place.
Strangely there is only one screw holding them together.
I also contacted KimpoiShop directly and asked for the grip screw to be placed on the left grip panel, so it will be hidden while the gun is holstered.
STEP 5: REVIEW
Time to get nitty gritty.
I wish the left grip could have covered the hole in the frame better and
the right grip panel could be slightly larger to cover the safety markings completely.
My biggest gripe is that I can not use a speedloader properly, since there is no cut-out on the left panel.
On the plus side, the grips feel very nice, and the wood is of a high quality with good, deep detail on the diamond cuts.
There’s no fraying or split wood on the edges, or on the inside, of the panels.
My wood grips work out-of-the-box, and you don’t even notice the seam.
But as mentioned on the packaging, the grips may require some modification for a perfect fit. Luckily this did not apply to me.
STEP 6: TEST FIRE
With the wood grips installed and looking fabulous, it’s time to test fire this thing.
So thank you Kimpoi Shop for accommodating my suggestions, great customer service and the two custom patches.
Ooooh... THEY GLOW IN THE DARK!
Please note that I’m performing these modifications at my own risk. These mods can go very wrong if you lack the skills, tools and knowledge required, and can damage your equipment and parts as well as cause injury on your person if you attempt them yourself.
Негізгі бет TIPS & TRICKS - WOOD GRIPS FOR ASG DAN WESSON 715 | AIRSOFT
No video
Пікірлер: 66