Thank you, Tom! I know this video is older, but I came in tonight, printed, cut, unsleeved, and bam! Took less than an hour for an unpracticed butter fingers like me. This box is perfect. I hope you're well.
@Conny-tk8md
Жыл бұрын
I made two of these nifty little boxes to hold the base game with its two expansions - and to have room for a good number of additional cards. Super easy to make! Thank you so much for sharing your projects with us!
@wetwillyccma
5 жыл бұрын
Just made mine tonight. Printed it out this morning, sprayed gloss clear coat on the sheets. Let them dry outside. Cut them out tonight. Used white glue to assemble. Turned out great. Thanks buddy.
@TomTeachesGames
5 жыл бұрын
Yes!!!!!! I'm so glad it turned out! You're more than welcome :D Hopefully I have (or eventually have) more projects that are also useful for ya :D
@magicmonkeyman159753
5 жыл бұрын
Love the box! I have my cards sleeved so I just increased the size a bit to accommodate the sleeves and made two boxes to fit the all! Thank you for all this work!
@TomTeachesGames
5 жыл бұрын
That’s so freaking awesome! I’m way glad someone likes it! It was a total life-saver for me.... I just hate having to set up 100 decks of cards.... thanks for taking the time to comment! That’s way cool of you.
@RBCally
5 жыл бұрын
Hey Stephen, how did you increase the size?
@magicmonkeyman159753
5 жыл бұрын
@@RBCally After I downloaded the file, I just opened it in adobe and hit print, there is a custom scale in the print settings. I could only increase it to 103% since any higher went off the page. This just about fits the sleeved cards with only a little bit of squeezing. If you could find some legal card stock paper I'm sure you could go a few more percent to make the fit perfect.
@tyak2004
5 жыл бұрын
You are my hero, Tom! I was just looking for a card storage solution but couldn't find any. Thanks so much!
@TomTeachesGames
5 жыл бұрын
You’re so welcome!!!
@veldje63
4 жыл бұрын
great solution Tom. I used photopaper in my printer. Have a nice glossy box now. Thanks.
@TomTeachesGames
4 жыл бұрын
Oh nice! How do you like that? I keep almost doing glossy -- but the though of finger prints on my boxes gives me all of the anxiety....
@andyjohnson2956
Жыл бұрын
i freaking love these videos!!
@lojolle
2 жыл бұрын
This is great! Thank you so much! I currently don't have tape at hand but I do have this Pritt glue stick. Im wondering if you have tried that, or do you find that taping is better/sturdier?
@TomTeachesGames
2 жыл бұрын
I think a glue stick would be fine. The reasons I don’t use a glue stick are that it is messy, and occasionally goes “outside of the lines” (and therefore could stick to cards), and as time goes on, the glue would eventually harden to the point of not holding the paper anymore. So I prefer tape, but glue is certainly possible.
@GeoKan
2 жыл бұрын
Very nice, can you make a box that can include the cards from the expansion also (sleeved pls)?! plus the dividers? Also a 3d print file for this box would be much appreciated!!!
@ionutsandu2830
4 жыл бұрын
Looking forward to your update with the new big expansion. Will you be doing that? Shadowed Paths adds a lot of content
@TomTeachesGames
4 жыл бұрын
I'm not sure that I'm getting this expansion, but someone did email me a list of new tabs.... I'm hoping to make those sometime this week....
@nicholaswahrer9888
3 жыл бұрын
This is a fantastic (and cheap) solution - thank you for sharing! How necessary is it to raise the FFG insert using the punch out boards? (Asking for a friend who tossed theirs...)
@TomTeachesGames
3 жыл бұрын
I don't think it's super necessary. Sorry for the delay, it's been quite the year...... But for me, that's just a way to keep things nice and snug and to help prevent stuff from getting tossed around so easily... But you can probably combat that as you lay stuff back in the box just so it fits together as much like a puzzle as possible. Hope that helps!
@wonka2863
4 жыл бұрын
your dividers are awesome (not to mention the box ;)) - thanks !!! Any chance you're planning to do similar dividers (double sided) for Marvel Champions ? there are many at BGG but none are double - sided :(
@TomTeachesGames
4 жыл бұрын
Thank you! I still haven't jumped into the Marvel Champions pool yet.... so sadly I don't have any current plans for those. Sorry!
@trilliank.8160
5 жыл бұрын
Thanks for the video, I took a tea box for the cards 🙈 yours is much nicer. Are you planning such a great series for Lord of the Rings as for Gloomhaven? I really hope so 🍻
@TomTeachesGames
5 жыл бұрын
I’m seriously considering it! But... here’s the thing.... getting the app into the video in a good way takes a LOT of work... I did it for Clank! and it took forever.... so I’m really really thinking about it, but haven’t decided for sure that I am committed to making 10 videos with full app-integration... ya know? But maybe!
@trilliank.8160
5 жыл бұрын
@@TomTeachesGames Oh, I understand that, of course. Unfortunately, I have no idea what and how much time in a video at work. I thank you for your videos and stay hopeful 😉
@docentemaxmcclure9667
2 жыл бұрын
This is awesome!
@GlennaJ74
4 жыл бұрын
Thank you so much, Tom!
@TomTeachesGames
4 жыл бұрын
You're more than welcome! I hope it was helpful for you!
@GlennaJ74
4 жыл бұрын
Very much so! Is there any chance of a card storage solution for Eldritch Horror? :)
@TomTeachesGames
4 жыл бұрын
Unfortunately I don’t own Eldritch Horror.... so for now, it’s a “no.” Sorry!
@GlennaJ74
4 жыл бұрын
No worries. I really do appreciate your LOTR: JiM-e templates and instruction video!
@TomTeachesGames
4 жыл бұрын
Thanks so much for saying so! They’re definitely made with love
@sams.7448
5 жыл бұрын
You are the man. Thank you.
@TomTeachesGames
5 жыл бұрын
Heck, you're so welcome! Thanks for watching and stuff!
@PogU_4Life
2 жыл бұрын
Does this need to be printed in A4 or A3 ?
@TomTeachesGames
2 жыл бұрын
Hmmm, I’m not familiar with either of those. I use 8.5 x 11 inch paper
Пікірлер: 36