An ambient noise of S2 to start with isn't so bad lol. I have minimum S5 almost all the time but I live in suburbia. What would have been interesting would be to see you adding one choke at a time to see which choke had the most effect or if each one contributed in addition to the overall reduction. I find its usually one noise source that's the major issue and once quenched gives the greatest gains in noise reduction. If you can find that, probably don't need to spend a bunch of money using the scattergun method.
@jojojeep1
10 ай бұрын
I married my wife 37 years ago. She came from Zada Croatia, maybe I shouldn’t have said that who knows
@alzeNL
3 жыл бұрын
I purchased the kit with the CMNF-500-50 in it, have to say it has done wonders for removing QRM. I have done alot of work in removing interference from my setup, but this really removed any last trace of interference. Its so good I've ordered the 2 more HF and 2 more VHF filters for my other radios, I'm especially looking forward to seeing how well it will perform with and noisey end-fed antenna. I wish there was a UK retalier, but glad i can get these from the US and they arrive very quick !
@darylcheshire1618
Ай бұрын
Yeah at home I get S9 noise, I brought my rig to a country location on a cliff top and was blissfully silent. Weak signals were easy. At the moment an ideal excuse to go on a picnic. This was a 40 minute drive, would like to try a closer location.
@59radio22
Ай бұрын
Hope you can get your noise issue fixed
@zxeng6064
2 жыл бұрын
I wish I had the noise floor you have even before the kit. In town S7 not uncommon. Modern day electronics don't care about radio anymore.
@TheSmokinApe
4 жыл бұрын
That kit is awesome 👍
@TorLangvand
3 жыл бұрын
You wouldn't see a difference in QRN using this ferrites and chokes. They are commonly used to reduce CMC (Common Mode Current) running "loose" in your setup during transmit.
@mssippijim
6 ай бұрын
I would be thrilled with 2 0r 3 s-units noise floor...mine is more like S8 - S9.
@59radio22
6 ай бұрын
Yea it helps with weak signals
@hogfishmaximussailing5208
Ай бұрын
Thanks for the video
@59radio22
Ай бұрын
Thanks for watching
@michelfrias7193
3 жыл бұрын
I have many noise caused from the lamps of the street in the night. Can this to solve my problem ?
@denelson83
Жыл бұрын
This will not work for me, as all of the noise sources in my apartment building are in other suites. I will have to use an MFJ-1026 instead.
@jameyevans29
Жыл бұрын
Did you ever make the second video without the preamp on? Thanks
@59radio22
Жыл бұрын
I have not. As my antenna setup I was using in this video was destroyed in a storm. My current antenna setup isn't as high up and didn't figure it'd make it a fair comparison
@Hydrostream1972
3 жыл бұрын
Looping the coax.one time with ferrite magnet. ..did SWR.. stay the same or go up a little bit. ...?.... Mike from Minnesota
@adrianinnavan3910
4 жыл бұрын
Not sure how much the kit cost but I'm betting that you could have bought the same gear at Amazon for much cheaper. I'm getting 10 ferrite chokes and it's costing me less than $7.
@59radio22
4 жыл бұрын
Know there are different qualities and number ferrites out there too, You might be able to get the parts similar cheaper if look around. But they may not be of good quality
@Hydrostream1972
3 жыл бұрын
Black. Red power wire....around magnet.....can u hear a difference in it.......Mike from Minnesota. .
@jojojeep1
10 ай бұрын
I have a 10 m import. I guess they would call it, 26 MHz quiet 25 MHz is quiet 24 MHz is quiet 28 MHz quiet but the one I use the most which is 27 MHz I have a nine noise level white noise , I’ve tried everything I can’t stand it anymore. Can you imagine a nine noise level only at night? I can’t talk to any of my friends.
@59radio22
5 ай бұрын
You might possibly have something in your home causing interference. Or something in your area
@brandondieter
3 жыл бұрын
Not a equal test, your first antenna you had the receive pre amp1 turned on. The off center fed with no noise you had the receive pre amp off. How much of a kick back did you get from Palomar for the video.
@59radio22
3 жыл бұрын
I will do another video. Thanks for catching that. I didnt get any kick back. Bought the kit myself
@jorgemaciel9290
3 жыл бұрын
Son muy ruidosos esos radios nuevos yo uso uno viejo y quite el nuevo recibe muchisimo mejor mi radio viejo
@sctrd1526
3 жыл бұрын
Um pre-amp on....hello.....
@59radio22
3 жыл бұрын
I will do another video. Thanks for catching that
@aarongriffin81
Жыл бұрын
some bands it was on some bands it was off. 21.200 had pre-amp 1 on for before and after which shows a big difference in noise. You can see the trademark wobbly electrical interference around 21.200 in the before. Although, it could very well have been an AC unit or washing machine, etc, and it may have been off for the after test.
@robertmiller2159
4 жыл бұрын
I tried that same kit on my 7300, didn't reduce any noise what so ever. I emailed Palomar customer support and never received a response from them. I'll prolly never use them again. W5EDM
@59radio22
4 жыл бұрын
sorry for your bad luck. hopefully they will get back with you
@Hydrostream1972
3 жыл бұрын
Good ol....snake oil.....
@generoll4027
4 жыл бұрын
Can't you just buy your own toroids?
@brian.7966
4 жыл бұрын
oh dear, some unhappy radio Hams.
@mike69993
4 жыл бұрын
Palomar are thieves. Took my money and never delivered product.
@59radio22
4 жыл бұрын
sorry for the issue with them. hopefully they will make it right
Пікірлер: 36