Nice setup. You can tackle the um problem by recognizing the real reason we do it. We fear the moments of silence, but they are okay to have.
@hugh_hancock
2 жыл бұрын
Agreed, and I think I’m just a slower talker in general and it helps me bridge the gaps. Thanks for watching!
@user-white007
Жыл бұрын
@@hugh_hancock it’s 100% a mental filler, instead of taking a second to find what to say you fill it with umm. I promise way less people would notice a slightly long pause
@newsogn5148
Жыл бұрын
I would not have noticed the UND either lol loved the tools been thinking on these for awhile now might pull the trigger on a similar setup
@philliphall5198
Жыл бұрын
Nice starter stuff yet I’ve been mechanic for 57 years and retired to full time small engine mechanic You’ll AllWAYS be buying tools and the new stuff Got to love it to stay in it
@hugh_hancock
Жыл бұрын
Oh I’m sure I’ll always be buying, but let’s not tell my wife that haha 😁. Thanks for watching!
@RenBobbins
Жыл бұрын
Those tools will last you a life time. The old craftsman stuff would too, if it was craftsman USA. Gearwrench is probably the best bang for your buck when it comes to getting professional grade tools for mid level tool money. Wise choice! Now you can pass that old craftsman kit on to future generations.
@hugh_hancock
Жыл бұрын
I’m absolutely loving them so far! And the old craftsman set is riding around in my truck toolbox for now until the kids get older, then I can upgrade my truck tool 😁! Thanks for watching!
@josephnavarro3620
Жыл бұрын
Great looking tools. I think I'll go with gear wrench for my next set too. The tool cart looks great, that color is the best by far.
@hugh_hancock
Жыл бұрын
Oh yea I love the color, I’m thinking about doing a 5 drawer box stack and making it a 10 drawer.
@philliphall5198
Жыл бұрын
Card bord works pretty good to keep draw’s clean and easy to change out Learn to keep every tool in its place and a place for every thing It will save you money because you can check your tools before the vehicle leaves the shop I love looking for tools down the road from a shop
@hugh_hancock
Жыл бұрын
That’s a great idea, my old craftsman set with the molded trays, I’ve only lost one socket out of it (1/4in socket 1/4drive) bc it fell behind the engine and the firewall. But the designated slots for each tool make it easy to keep track of all of them.
@jaredkraus3123
2 жыл бұрын
love my gearwrench wrenches and sockets
@hugh_hancock
2 жыл бұрын
Thanks for watching!
@mike-fp6lq
8 ай бұрын
I work in a shop. I've recently started investing in GearWrench and fallen in love with the brand. I was originally investing in Craftsman but have gradually transitioned. A lot of the people in my shop have Snap-On, Cornwell, Mac, and Matco. Pretty much the main tool truck brands. I've handled many of their tools working under different techs as an apprentice. I have to say, a lot of my GearWrench feels very similar to those tools. I'm not really interested in spending my money on the tool trucks because I feel like there are many other tool brands that offer similar quality that I can get elsewhere for a fraction of the price. GearWrench has become my favorite.
@hugh_hancock
8 ай бұрын
I agree for sure! I have used some snap on stuff where I work as well and gearwrench definitely feels just as good! I will say you can’t beat a snap-on digital torque wrench though, if you know of something just as good but cheaper let me know because I need one!
@antilaw9911
10 ай бұрын
Nice haul! Im a Gearwrench fan 👍
@hugh_hancock
10 ай бұрын
Thanks, I’m loving them! Thanks for watching!
@kdtxtooldad
2 жыл бұрын
Great tool haul and upgrade
@hugh_hancock
2 жыл бұрын
Thanks! Will do an update after a while and after I fill it up some more
@honkhonklersr.4340
2 жыл бұрын
It appears GearWrench is becoming the new Craftsman. I too like most of their products but don't have the urge to replace my older tools...yet. 😉
@hugh_hancock
2 жыл бұрын
I don’t blame you, I do like my craftsman stuff I have, I just hate that most all the sears stores closed down around me
@topnotchtx
2 жыл бұрын
I’m thinking about buying another toolbox and just go with gear wrench for everything.
@hugh_hancock
2 жыл бұрын
It’s good stuff, I’m enjoying them so far! Thanks for watching!
@jontnoneya3404
10 ай бұрын
That was really cool. Loved that. I've got some new gearwrench ratcheting wrenches and they're pretty nice at a really great price! Was looking at that 5 drawer. It was on sale for Black Friday and the series 3s are coming out soon so they'll be on clearance for even lower very soon.
@hugh_hancock
10 ай бұрын
Yes it is a great box and tools, I’m loving mine and using the crap out of them! I would love to do the stacked box mod to give me a little more space! Thanks for watching!
@jontnoneya3404
10 ай бұрын
@@hugh_hancock- keep your eyes peeled because I think the 6 drawer full bank cart will be on clearance after the first of the year. Saw some SEMA vids with HF and the Series 3, 6 drawer full bank is supposed to be released in early 2024.
@griggs3d
Жыл бұрын
Umm, thoughts on your box versus the full bank? Thanks for the tour!
@hugh_hancock
Жыл бұрын
Honestly the full bank would be nice having drawers all the way down, only looked at it in stores but I could justify the $600 price tag, considering I got mine on sale for like $220 if I remember correctly. I am considering doing the 10 drawer modification on my box. Thanks for watching!
@STREETFIGHTER50
5 ай бұрын
Nice choices man! Love GearWrench tools! I think you gonna need a bigger box though 😂
@hugh_hancock
5 ай бұрын
I’ve been using them all for over a year now and I am loving them! And yes I would love a bigger box, got my eye on one of the HF 56” or 72”, it will come with time!
@bradtaylor1217
2 жыл бұрын
I need a setup like this! I have the same wrench set and a harbor freight toolbox.
@hugh_hancock
2 жыл бұрын
You need to go check out my wrench holder video, it works great in this box!
@martinschaffmeir7729
2 жыл бұрын
Hope you enjoy those tools, I have some of the same
@hugh_hancock
2 жыл бұрын
I hope I enjoy them as well! Thanks for watching!
@gabrielmacias4466
Жыл бұрын
The SAE sockets and wrenches are they normally used for Hondas Toyotas ??
@hugh_hancock
Жыл бұрын
I think Toyota and Honda are all metric, SAE is used more on your older American vehicles, it’s like your 3/8, 1/2, 5/8 etc. Thanks for watching!
@Miamilyfe
Жыл бұрын
Where did you buy all the gearwrench tools ?
@hugh_hancock
Жыл бұрын
Ordered them online, all the Amazon links are in description. Thanks for watching!
@richardbates2367
2 жыл бұрын
I like the new design handle gear wrench screwdriver set and the trays,I already have the sunex 1120ss set of screwdrivers and the 70pc Pittsburgh comfort grip handle screwdriver set.
@hugh_hancock
2 жыл бұрын
Yes the new handle gives a pretty good grip compared to the old style handle
@richardbates2367
Жыл бұрын
Yes I agree I think I prefer the new design gearwrench screwdriver comfort grip handle set over the Pittsburgh 70pc and the sunex tools comfort grip handle screwdriver set 1120ss
@richardbates2367
2 жыл бұрын
and I haven't used them yet but I bought the OEM tools green and black in all three drive sizes but they are not shallow,mid length and deep, but just shallow and deep
@hugh_hancock
2 жыл бұрын
The socket trays?
@richardbates2367
2 жыл бұрын
@@hugh_hancock yes, sorry about that.
@jasonmagos9361
Жыл бұрын
Where the heck did you find that much gearwrench stuff at the same location?
@hugh_hancock
Жыл бұрын
Ordered it all online, I had to wait a little while before all of it came in to make the video, thanks for watching!
@stevecochrane9657
Жыл бұрын
I like it 😊
@hugh_hancock
Жыл бұрын
Thanks for watching!
@josiahlinquist4043
2 жыл бұрын
Gearwrench is good, but I've had some bad experiences with tool quality
@hugh_hancock
2 жыл бұрын
I’ve had an older swivel head ratchet break some teeth, but never any issues with our stuff we use at work
@jasonkimble8926
Жыл бұрын
Nice, looking for tool set, comes metric, 24mm, 19mm
@hugh_hancock
Жыл бұрын
Sockets or wrenches?
@jasonkimble8926
Жыл бұрын
@@hugh_hancock sockets
@richardbates2367
2 жыл бұрын
cool shirt I myself have a dodge ram truck mine is a 2000 dodge ram Laramie slt quad cab long bed 1500 4x4 5.2 litre 318 magnum v8 it's gloss black and white pinstripe except the hastily blasted flat black red regular cab or club cab doors..
@hugh_hancock
2 жыл бұрын
I love my dodge, not running right now, doing an engine rebuild, but I can’t wait to get it back running.
@richardbates2367
Жыл бұрын
I forgot to mention although the factory guage cluster is junk truck has 176k miles and the front end is completely rebuilt.
@drew5992
2 жыл бұрын
Around the 6min mark what are the item number for the ratcheting wrench sets? Thanks
@hugh_hancock
2 жыл бұрын
Metric is 86928 and SAE is 86959
@drew5992
2 жыл бұрын
@@hugh_hancock thanks for the response
@richardbates2367
2 жыл бұрын
I have I believe a 30pc tekton combination wrenches set sae and metric.
@hugh_hancock
2 жыл бұрын
My dad has that set, seems to be pretty quality
@richardbates2367
Жыл бұрын
Tekton wrench set was cheaper than the big gearwrench combination wrench sets I wanted so I bought tekton.
@NapilihauKreationz
2 жыл бұрын
Nice.
@hugh_hancock
2 жыл бұрын
Thanks for watching!
@Calmdowndude
Жыл бұрын
Should of had a Uhs and Uums counter
@hugh_hancock
Жыл бұрын
Yea I’m bad at saying both haha, thanks for watching!
@cawbplays
Ай бұрын
you missed a bunch of the ums sr.
@hugh_hancock
Ай бұрын
I did my best 😂
@CarRimRod
Жыл бұрын
tbh if you wouldnt have put the "umm counter" and brought attention to how many times you said it i probably couldve watched the entire video but because you brought attention to it, it just drove me insane.
@hugh_hancock
Жыл бұрын
Well I appreciate you trying to watch! I stopped it pretty early on in the video so go back and watch it again if you can muscle the first few minutes!
@The3rd1inLine
Жыл бұрын
The um counter is more annoying than the um
@hugh_hancock
Жыл бұрын
Thanks for the input boss 👍🏻
@ddaley87
2 жыл бұрын
Very annoying with the counter. Dude
@hugh_hancock
2 жыл бұрын
Thanks for watching anyways dude!
@danny-fs6hk
Жыл бұрын
You’re free to stop watching anytime… dude
@tommyellis8273
Жыл бұрын
Can definitely do without the annoying um counter sound. Jesus
@hugh_hancock
Жыл бұрын
Jesus…where? Thanks for the input buddy 👍🏻
@Animeboyz52
2 жыл бұрын
The umm counter Is annoying as a first time viewer .
@hugh_hancock
2 жыл бұрын
Thanks for watching!
@larryburns4605
2 жыл бұрын
You going to need to add side box
@hugh_hancock
2 жыл бұрын
Haha maybe, I got another 3 piece tall craftsman box that I’m going to keep some of the less used items in there
@stefanczechorskidds8435
2 жыл бұрын
Love the Umm counter! A sense of humor is always a good sign!
@hugh_hancock
2 жыл бұрын
Thanks! I try to make the most out of my short comings haha
@Mopar-Pioneer
2 жыл бұрын
Gearwrench as good as you will get. I bought the gearwrench rolling box and it had the foam socket trays in it. well organised from Gearwrench. Love their ratcheting wrenches !
@hugh_hancock
2 жыл бұрын
Absolutely, thanks for watching!
@PhillipRhodes
2 жыл бұрын
Nice setup man! I want one of those US General boxes now to re-organize my tools in my home electronics lab. I've got small toolboxes stacked on top of small toolboxes now, and stuff scattered all over my bench. Would be sweet to pick up one of those boxes and centralize everything.
@hugh_hancock
2 жыл бұрын
They run sales on those boxes often, they are nice for there size! Thanks!
@MarzNet256
2 жыл бұрын
Awesome. I love the gearwrench stuff, especially the sockets and 120xp ratchets.
@hugh_hancock
2 жыл бұрын
I am eyeing a 90 tooth ratchet set. I might have to look at the 120s though. Thanks for watching!
@randystober7134
2 жыл бұрын
Nice setup, I know you are proud. Keep the videos coming and dont worry about all the ums.
@hugh_hancock
2 жыл бұрын
I’m just gonna keep being me! All the umm’s included!
@desertratedc9596
2 жыл бұрын
Right on man! I lean towards tekton, gearwrench, knipex and carlyle my self. The gearwrench and carlyle are fantastic since just like my old harbor freight stuff I got before becoming a apprentice technician I can take them to a nappa if they break and have one ordered and usually if not replaced that same day it is replaced in no more then 3 days. My home box has also slowly been rotated out of my old HF stuff with the same tools I use at work and the plan is that set will likely go to one of my children or I guess a niece or nephew who appreciate them if I don't have kids or my kids don't care about them. Having more napa autoparts stores then HF tools make it convenient to have carlyle and gearwrench since usually one of the 6 stores driving distance away will typically have a replacement for my broken tools. I don't know if all Napas warranty gearwrench but m8ne are all owned by the same guy so they do.
@hugh_hancock
2 жыл бұрын
Sweet man, and yea that’s the good thing about tools is you can pass them down, if my son or daughter is anything like me they will take them over anyways haha
@PhillipRhodes
2 жыл бұрын
I just started using Knipex pliers. So far I'm pretty impressed with them. I definitely expect to acquire more in the days to come.
@desertratedc9596
2 жыл бұрын
@@PhillipRhodes by far some of the nicest I have had but to be fair when I started my career I didn't have access to USA made channel lock, Irwin and other similar well loved US made pliers.
@MarkWright1963
Жыл бұрын
Nice selection. I have Snap On, MAC and Facom. Gearwrench also and great quality and good value for money. Ps can you stop slamming shit against the table and bashing with you hands!
@hugh_hancock
Жыл бұрын
Haha I gotta make sure it tough before I even use it! Thanks for watching!
@craigdave3266
Жыл бұрын
U said u weren't skipping any sizes on SAE u didn't show the 19/32 25/32 I Ben looking for a set with no skips
@hugh_hancock
Жыл бұрын
Can’t say I’ve ever ran across needing either of those sizes, I really meant they didn’t skip your common sizes
@mt1885
2 жыл бұрын
Got the 3/8 digital gearwrench 10-100 as well, still trying to see how it goes with it (would like to know what you think as well).
@hugh_hancock
2 жыл бұрын
Haven’t had the chance to use it yet. I am planning on doing a video comparing the Gearwrench to a few other brands like snap on, paramount, and any others I can get my hands on here soon.
@mt1885
2 жыл бұрын
@@hugh_hancock I would be curious to see you experience.
@thebackwoodsmechanic5029
2 жыл бұрын
Umm Gearwrench is a great option . Showing some support. Gearwrench , Tekton, Channellock, Klein, ICON, Mayhew good choices for tool truck alternatives
@hugh_hancock
2 жыл бұрын
Definitely a supporter of USA made channellock and Klein, good stuff. Have no experience with tekton, icon, or mayhew. Thanks for watching!
@eclipsereviews4678
2 жыл бұрын
Tekton will treat you great!!! Their weakness are def their wrenches tho. They are the strongest ones but will strip bolts...Check out other yt channels abt testing the best wrenches and you'll see tekton never breaks!!!
@twostroke12v71
Жыл бұрын
Commenting on the video for the algorithm
@hugh_hancock
Жыл бұрын
Thanks for watching!
@edwardkramer8738
Жыл бұрын
Your box is too small lol
@hugh_hancock
Жыл бұрын
Surprisingly I still got a lot or room in it! Even though it’s small you and load it down and still roll it all around the shop! Thanks for watching!
@diogor420
2 жыл бұрын
Pro tip: clean the camera lens before recording!
@hugh_hancock
2 жыл бұрын
It’s probably permanent scratches on my phone case, I’m a little rough on my stuff haha. It might be time for a new case. Thanks for watching!
@randyvalenzuela5336
2 жыл бұрын
WOW! thats an awesome tool haul man cant wait till I get my own set to start working on cars. How much did you spend on all of this if you domt mind me asking. I might just wait for a black friday sale lmao.
@hugh_hancock
Жыл бұрын
I can remember the exact number but it was well over a grand, keep an eye out on amazon because it there seems to always be some tool 5%-20% off. Thanks for watching!
@ShaneO-nm2hh
2 жыл бұрын
Nice set up 👍👍 Just upgraded my tool box couple months back. I went with over 50% gearwrench stuff. Love there ratchets, have had good experience with them. I’m in Australia where warranty with gearwrench is pretty straight forward. Love snap on have a couple of the dual 80 ratchets. Yeah the quality is awesome, if not the best. But just can’t justify buying anything else snap on. My favourite tool brands for value and quality are Gearwrench for ratchets, wrenches, sockets and torque wrenches. Tekton for sockets and combination wrenches. Wiha for pliers, screwdrivers Knipex self explanatory Draper screwdrivers and bits Williams for there ratcheting screwdriver, (love that thing)
@hugh_hancock
2 жыл бұрын
I definitely want to get some knipex pliers, but I love my Gearwrench stuff! Thanks for watching!
@ShaneO-nm2hh
2 жыл бұрын
@@hugh_hancock knipex cobra pliers are awesome. I love my gearwrench tools also. Anything that comes from there Taiwan plant (90% of there stuff) is excellent quality. Taiwan have better QC and manufacturing facilities, and can produce quality tools. The couple things made in their China plant are a little hit and miss, though I do like their bolt biter impact sockets. They are made in China but are great quality. Only problem is they are pretty pricey. I picked up a full set off Amazon a while back for under half rrp. Had them in me Wishlist for a while and noticed one day was a massive price drop so grabbed a set. Was disappointed at first when I seen made in China. But they are made really well. Come in handy a few times and better quality then other brands I’ve used.
@queefersutherland8495
2 жыл бұрын
Thumbnail made me sub. Haven't seen a vid yet but can tell I'm going to like your channel.
@hugh_hancock
2 жыл бұрын
Thanks for watching!
@baileyvolkert
Жыл бұрын
How is the torque wrench? I thought they pulled them from the market a while back due to the high failure rate. If they are back then hopefully they fixed them.
@hugh_hancock
Жыл бұрын
I’ve only used it twice, seemed to work pretty well. How long ago did they pull them from the market?
@baileyvolkert
Жыл бұрын
@@hugh_hancock I tried to buy one a 3/8 one a year and a half ago or so. Lots of negative reviews about electronics issues, and none in stock anywhere. Looks like they are now and some positive reviews too. Might pick one up after all. I don't wrench professionally anymore so I cant really justify the snap on.
@PTRRanger951
2 жыл бұрын
Missed two ummmms before you put 5 on the screen lol.
@hugh_hancock
2 жыл бұрын
Thanks for watching!
@AbsentTribe
3 ай бұрын
I have allot gear wrench tools I love em
@hugh_hancock
3 ай бұрын
I’m lovin mine too! Thanks for watching!
@toddhickox4757
Жыл бұрын
Very nice setup!
@hugh_hancock
Жыл бұрын
Thanks! Been using for over a year now and I love it! Thanks for watching!
Пікірлер: 128