I bet Tony would update Windows on his machine before he filmed it. Get on that Stefan. That aside, thanks to both of you for doing what you do.
@vincei4252
2 жыл бұрын
This Old Tony and Stefan on the same day? It must be Christmas!
@Timboykee
2 жыл бұрын
I'm beginning to think these two were separated at birth.
@Andrew_Fernie
2 жыл бұрын
You just stole my line !!! 😃
@vincei4252
2 жыл бұрын
@@Andrew_Fernie sorry
@jimsvideos7201
2 жыл бұрын
Gerolf and Quinn too!
@ericg7044
2 жыл бұрын
@@jimsvideos7201 And Clough42, and Abom. No Steve Summers video today though, and he usually uploads every Saturday morning. Hope he's alright.
@bobuk5722
2 жыл бұрын
Make your own broken end mills Stefan? Gave me a smile first thing this morning! Always a pleasure watching your brilliant demonstrations. I very much like your approach to life as well. It is uplifting. Bob.
@michaelpiotrowicz6100
2 жыл бұрын
The cut-away shot at the end was wonderful, the cut-away was good for clearing the chips too :)
@donteeple6124
2 жыл бұрын
Stefan, you ROCK !!!! Doesn't matter whether its a project or you just showing your regular normal stuff, you instill pride in precision, and excellence in craftsmanship. Keep it up.
@CCCfeinman55
2 жыл бұрын
Another short while immersed in complete fascination! I love fine, precision workmanship. My biggest forever unfulfilled dream is to have a machine shop. Why forever? ….well, my time on this globe is somewhat short. So I satisfy my yearning by watching you and several other clever folks on KZitem. Thanks for your contributions to the ever expanding knowledge pool in our little online world.
@jdmccorful
2 жыл бұрын
Ditto!!!
@TheUncleRuckus
2 жыл бұрын
No way... This Old Tony, Abom79, The Post Apocalyptic Inventor and Stefan Gotteswinter all uploaded today, how did we get so lucky?! Best Day Ever! 😍👍👍 I like the little brass bar and lapping compound trick, I've never seen that before.
@johnsmith-zs9jq
2 жыл бұрын
Who knew you can make your own busted end mills. I'd like to see Tony try that!
@StefanGotteswinter
2 жыл бұрын
I think I stole that joke from Tony.
@rameezsheikh7576
2 жыл бұрын
@@StefanGotteswinter i see 😂
@roberttaylor2328
2 жыл бұрын
My first viewing of your channel, very enjoyable. Me: 1959 year K.O. Lee Aberdeen T&C Grinder, brought home for my semi-retirement. Great content, subscribed!
@rootvalue
2 жыл бұрын
Thank you for sharing your work. I know it adds labor to any process, but I appreciate the extra effort you go through for us. 🥳
@Majiksmoke
2 жыл бұрын
"I'm using the Deckel S1 tool and cutter grinder to cut off the ends of these broken carbide end mills.....I make those myself" 🤣😂 That line right there hit exceptionally close to home, and for that, I had to subscribe!
@plattrap
2 жыл бұрын
Darken the outside of the cutaway with black sharpen to improve the contrast between the inside an outside. Another nice effect to see with a stroboscope is the change in speed of the spindle when loaded by the cutter.
@StefanGotteswinter
2 жыл бұрын
Haha, darkening the cutaway section would almost make it look like a comic, good idea.
@user-oy4lk7fd9w
2 жыл бұрын
25:07 that footage is just beautiful, kudos for taking the time to do that.
@buildstoys
2 жыл бұрын
The ending was awesome Stefan, you could have definitely "frozen" the rotation with a stroboscope (for example my Strobotac works on objects rotating up to 14,400 RPM).
@buildstoys
2 жыл бұрын
@zomgthisisawesomelol Yes, most Strobotacs will accept an external trigger. I'd recommend reading the Handbook of High Speed Photography (it's free online).
@kerkkonenahaima7322
2 жыл бұрын
Not a very cheap guy for the viewers, first you made us all buy D-bit grinders and now have to invest for couple of other grinders😂. Some time ago I had to see what happened in a novel shape of a woodcutting circular saw teeth when chopping wood. I used a car ignition timing stroboscope synchronized with the blade. It was the scariest thing ever; the 5000rpm running blade seemed like a fully stand still item that magically took chips from the end of a 2x4". It worked quite fine with video camera too, regardless of the frame rate differences. Thanks for a great video again!
@StefanGotteswinter
2 жыл бұрын
Funny enough: All those grinders I have are not a replacement for the dbit grinder - I use every one of those machines on a very regular basis :) Good hint on the car ingnition stroboscope light, I will look into that.
@artmckay6704
2 жыл бұрын
Thank you, Stefan! We always miss you when you're not sharing a project with us. Love your stuff! Please keep em coming! :)
@felixar90
2 жыл бұрын
"Broken endmils, I make them myself" ah
@scruffy3121
2 жыл бұрын
Love it 😂
@JanBinnendijk
2 жыл бұрын
I also make small boring bars and grooving tools, i use a cheap lathe with a diamond wheel..Works a treat.. Broken and Dull endmills are just "rough stock" for making lathe tools..
@deemstyle
2 жыл бұрын
The cut-away view at the end was really awesome. Thanks for sharing!
@reinierwelgemoed8171
2 жыл бұрын
You are by far my favourite You tube machinist. I learn so much from You. Thank You very much for the effort that goes into Your videos.
@CockatoobirdmanBill
2 жыл бұрын
Stefan the cut-away was was the best of all a strob will freeze the action but I like this, it has more class...Be well and be safe...............
@johangroenewald6406
2 жыл бұрын
I make the broken end mills myself………love the humor Stefan
@ShevillMathers
2 жыл бұрын
Metal surgery in the workshop. Your precision work on such a small scale, makes the average machinist a ‘blacksmith’, on the scale of things. Don’t get me wrong, I admire all those precision machinists too. This is like me doing neurosurgery on a lab rat. Greetings from Tasmania Australia 🇦🇺.
@richardbradley961
2 жыл бұрын
THANK YOU STEFAN LOVLEY CAMRA WORK. REGARDS RICHARD.
@ianpendlebury9503
2 жыл бұрын
Another fascinating demonstration plus excellent photography. Thanks.
@mattmanyam
2 жыл бұрын
Thanks for letting us hang out, Stefan. I was going to comment about your camera shots even before the final strobe shot... You're spoiling us! I appreciate everything you show!
@DubsnSubsSessions
2 жыл бұрын
Another excellent mix of flat humour and metal working magic. Cool cut away at the end, I'm going to try that tomorrow and see if I can get it frozen.
@jasonh3109
2 жыл бұрын
Amazing. As. Always. I really love how you break this all down into manageable pieces. Thank you!!!!
@BillyHardcase
2 жыл бұрын
Great video my precision hero..
@simonhopkins3867
3 ай бұрын
Eccentric work is always fascinating to me. But this is next level.
@misterfixit1952
2 жыл бұрын
I appreciate you showing your thought process as you make these special cutting tools. The thing I like most about your channel is that even though you do professional, commercial work, you think like a DIY machinist. You don't spend absurd amounts of money on things like your spin fixture when a reasonably priced Chinese tool will do. Also, you don't mind making a tool, rather than spending big money on a ready-made equivalent. Throughout your history, on this 'channel, you have saved money buying quality used, and knockoff tools, and used those tools to make other tools. This is what most hobby machinists have to do to build up their home shop. It's no fun watching a professional shop drop big bucks on great tooling that I will never be able to afford. You demonstrate that ingenuity and affordable tools will let you accomplish anything your mind can conceive. On a practical note, I need to make a similar cutting tool to machine the inside features on an ATC conversion I am doing on a BT30 spindle for a CNC mill I'm working on. Thanks for the tips and inspiration. This is a perfect project for my new U3 tool grinder that you and Robin Renzetti inspired me to buy.
@bradthayer6782
2 жыл бұрын
I love the combination of extreme precision and channel lock pliers. You make the difficult look deceptively easy.
@OakesProject
2 жыл бұрын
What an awesome day. Thanks Stephan. Your content is always very interesting. Unless TOT releases a video on the same day just to compete with you . . . . . . . . . .Fight!!!!!!!
@reiniertl
2 жыл бұрын
Cutting the cut away was cool, even without stroboscopic effect. I would of putt it earlier in the video because it would certainly keep people watching for longer. Great work there.
@JustAnotherCraftsman
2 жыл бұрын
The presentation of tool in action was absolutely stunning. There are a lot of channels overusing word amazing, but this was indeed amazing and clever idea.
@Caughtitoutdoors
2 жыл бұрын
You sir are awesome!
@godfreypoon5148
2 жыл бұрын
5:19 I make those myself too!
@FinnoUgricMachining
2 жыл бұрын
I hope You liked making the video as much as I liked to watch it.
@StefanGotteswinter
2 жыл бұрын
Thanks! Yep! Making the videos is a nice distraction :-)
@bartharkemametalworks2299
2 жыл бұрын
Nice camera work and I like the reverse cup wheel trick. Havent got my Deckel S1 running but learning for your video's.
@beatrute2677
2 жыл бұрын
The shop I grew up in use to call those spin fixtures a spider box.
@bulletproofpepper2
2 жыл бұрын
Thanks for sharing! I have junked a lot of parts and fixtures but I also have made machines with hand tools to make better equipment to make better equipment. I have went from welding grade equipment to medium grade machest quality from making tractor parts. I find your video amazing!!
@SPRlNK
2 жыл бұрын
I like how you showed it cutting inside of the part at the end of the video. 👍
@brucewilliams6292
2 жыл бұрын
I am always in awe of your talents. The scene at the end showing the cutter in action with the stroboscopic effect was well done.
@hartmutharwat2657
2 жыл бұрын
echt super Stefan It is exiting to see to do this tooling where you can measure the single features with the groove of your tips,
@TrPrecisionMachining
2 жыл бұрын
very good job stefan
@StefanGotteswinter
2 жыл бұрын
Thanks!
@TON_KROW
2 жыл бұрын
I’ve always had to make my grooving tools narrower than the groove . And step over to get final width. But then again that’s how I had to do it in inconel 718. And I do it that way on everything out of habit
@StefanGotteswinter
2 жыл бұрын
Yikes, inconel - Gladly this one needed only to work in 1.4305 (303 stainless). If I had to do wider groves, I would definetly step over - this one was also on the edge of working properly with the small diameter starting bore and the large diameter groove.
@robertdebusk6157
2 жыл бұрын
Stefan, You never cease to amaze me with the level of detail you can achieve with your projects, or tools. Thank you for the look inside your world. Take Care and Stay Safe Bob
@robertklein9190
2 жыл бұрын
Plumber's pliers made in Burma, is Stefan shopping at Harbor Freight, Wow. I have the feeling that the projects he's working on have something to do with invading your body or mind. Nothing to do on a Saturday, let's spend all day grinding and video a small tool, but of course WE all appreciate the effort 10 fold.
@CreaseysWorkshop
2 жыл бұрын
I made one of these a few weeks ago after I watched your earlier video about making boring bars from carbide. I wish I had known the brass lapping trick. That is next level stuff. I will try it next time for sure. Very useful video.
@MachiningandMicrowaves
2 жыл бұрын
The strobe effect would be easy enough to implement with a Hall sensor and a configurable delay to drive a powerful LED array light, so long as the rate was far enough from the shutter rate to prevent flickering. It would be even neater to phase-lock it so you could adjust the phase lag and have a sort of manually-adjustable rotation of the image. I can't think of a way to extract the frame rate from a phone camera or my ZV-1 to synchronise the lathe VFD frequency to the camera. Nice effect!
@captcarlos
2 жыл бұрын
Thank you for another masterclass in making the tool. I find this aspect fascinating. 'I'll Be Back!'
@mikemichelizzi2023
2 жыл бұрын
Nice work and thanks for the cutaway demonstration! I also appreciate the advice to be able to walk away from a project if it's not turning out satisfactorily.
@CraigLYoung
2 жыл бұрын
Thanks for sharing 👍
@ImolaS3
2 жыл бұрын
Love that final video of the cutting :)
@mumblbeebee6546
2 жыл бұрын
That “X-ray vision” at the end is both clever and beautiful!
@Ryan-dz3jo
2 жыл бұрын
Thanks Stefan, love your work with the cut away and you have so much natural light in your grinding room! Looks fantastic.
@stumccabe
2 жыл бұрын
Interesting little job. Thanks Stefan. Hasta la vista, baby!
@dominic6634
2 жыл бұрын
Use to use those tool cut grinders for jobs there tons of fun.
@SamEEE12
2 жыл бұрын
I am a simple man, I see a Stefan Gotteswinter video; I smash the like button.
@TomChame
2 жыл бұрын
Very very neat, thanks.
@evesdad8419
2 жыл бұрын
Completely agree, thanks!
@bobvines00
2 жыл бұрын
Stefan, this is a wonderful video. And the almost-stroboscopic view of the tool cutting at the end shows how it cuts wonderfully! I look forward to you synching your camera/lights for future shots like this _and_ showing us the manufacture of the future "flux capacitor"(?) that you are making these cutting tools for!
@mgbrv8
2 жыл бұрын
“I’ll be back” best Stefan quote yet 👍🏻
@lynnbryant9866
2 жыл бұрын
Your last comment, "I'll be back." Diet Coke out of both nostrils! You got me! Hilarious. Thank you. I needed that laugh. Cleaning the keyboard, though, not so much. :)
@MegaCountach
2 жыл бұрын
Very helpful Stephan, thanks! Cheers, Doug
@MJ-nb1qn
2 жыл бұрын
“Standing clueless at the grinder” should be a song title. Great video work. Thanks
@VirtualJMills
2 жыл бұрын
Ditch == Document thoroughly, pack for preservation (corrosion prevention, etc…), and set-aside until another project calls for some of those custom parts.
@suprafahrer6453
2 жыл бұрын
Verdammt gut gemacht Stefan.
@StefanGotteswinter
2 жыл бұрын
Danke!
@CapeCodCNC
2 жыл бұрын
Wicked cool!
@ryanjordan4435
2 жыл бұрын
Great content impressive vast and knowledge rich.
@bkoholliston
2 жыл бұрын
Very cool, particularly the cut-away view. When you showed the CAD, I was thinking you would add the little chamfers on internal grooves shown in your model to your cutter, but I guess you would still have to deburr in the hole either way. Nice job! A strobe tied to the spindle would be easy--you need to sense the spindle position once per revolution with a Hall effect sensor or reed switch and magnet and then a variable delay from that trigger to fire a strobe (could be LEDs) at the right time to get your view. In other words, the frequency of the light pulse is one per revolution, but you need an adjustable phase offset from the trigger to the light. A 1000 rpm spindle is only 16.67 rev/sec so your strobe would fire at 16.67Hz, which is very achievable.
@jeromedumalin9954
2 жыл бұрын
I imagine the use of a boring head in a conventional spindexer should work as well for certain diameters
@StefanGotteswinter
2 жыл бұрын
Yep, absolutely! Deckel even recommendet that in one of their technical manuals for the S1 grinder.
@HanstheTraffer
2 жыл бұрын
More beautiful machinery....Glad its in your hands. Who uses this stuff better?
@jdmccorful
2 жыл бұрын
Wonderful explanation and demostration. Thanks for the look.
@624Dudley
2 жыл бұрын
Thanks, Stefan. That was superb.
@kentjohansson6937
2 жыл бұрын
I make those myself :)
@iiredeye
2 жыл бұрын
Beautiful work as always Stefan...Thanks for sharing.
@frankward709
2 жыл бұрын
Fantastic work Thanks for a very good video
@keithstone7930
2 жыл бұрын
Stefan and Tony back on the same day! I feel faint…..
@andrewwolf4430
2 жыл бұрын
Just like Stefan I too make broken carbide end mills. The smaller the end mill the more I break
@Xlaxsauce
2 жыл бұрын
The de-sync does make the cut look more interesting. Reality vs demonstration
@brucekoehler276
2 жыл бұрын
You just enjoy the means and the ends. Thanks
@AmateurRedneckWorkshop
2 жыл бұрын
Very interesting thanks for the video.
@wrstew1272
2 жыл бұрын
As usual, a wonderful instructional video for a necessary tool for a precision job. Why buy when you have the precision tooling to make at home? You are recycling! Reusing! Keeping the planet free from those nasty bits of carbide that would otherwise be buried in landfills! Besides, what would you have to pay for three or four of those puppies in Germany at today’s price for quality pieces?
@guye7763
2 жыл бұрын
Nailed it Vince! and Thanks Stefan.
@iteerrex8166
2 жыл бұрын
If the frequency of the lighting (50hz in Europe), the rotational velocity of the spindle, and the frame rate of the camera, are integer multiple of one other, then that last bit would synchronize nicely. Thanks for the high quality videos Stefan.
@StefanGotteswinter
2 жыл бұрын
In this case I just indicated them on the top flat.
@666Tomato666
2 жыл бұрын
Some cameras have a shutter that is selectable on a sub fractional basis (so you can shoot at something like 1/100.123 of a second), may be easier that getting a strobe hooked up to a lathe...
@graemebrumfitt6668
2 жыл бұрын
Soooo Satisfying Stefan! TFS, GB :)
@TheExtream
2 жыл бұрын
die PH horn super minni werzeuge sind top aber auch mal schön zu sehen das man sich sowas auch selber machen kann wenn man einen mittelgroßen Maschinenpark in der garage hat :D
@StefanGotteswinter
2 жыл бұрын
Ich hab den kompletten pHorn Katalog neben mir stehen - So einfache Sachen wie den Hakenmeissel kann ich schon exakt passend zur Arbeit schleifen, aber die haben schon total verrückte Sachen im Sortiment :D
@Rustinox
2 жыл бұрын
I don't know how you do it, but you always make it look easy to do. The normal things to do. To me this is pure art. Thanks for showing it. BTW, at 1:40 it shows 23°C on your PC. End of October? I suppose it's the result of global warming in Germany...
@Adventure_Van_Upgrades
2 жыл бұрын
"Welcome back to this old tool grinding shop" 😂😂😂
@RaptorMachineToolCo
2 жыл бұрын
Very Cool Stefan !!!
@user-oy5bp4xb9h
Жыл бұрын
thank you
@FCleff
2 жыл бұрын
Bravo!
@anarcowhatever
2 жыл бұрын
The Renzettiness is strong in this one
@StefanGotteswinter
2 жыл бұрын
So much to learn from the man :-)
@anarcowhatever
2 жыл бұрын
@@StefanGotteswinter I reckon it's too advanced for my current skills. I usually have to break down their videos into 10- 12 parts 😂 But you always pick up something from him.
@brianrhubbard
2 жыл бұрын
You are the definition of patience. LOL
@michaellinahan7740
2 жыл бұрын
Stefan, like you I make more broken carbide than I care to admit to. Do you remember where you got the resin bonded diamond cut off wheel/ I have been looking for something like that for a while to cut them up. I did like the shot of the tool cutting the internal features, a bit like finding out you have xray vision!
@StefanGotteswinter
2 жыл бұрын
All my diamond wheels that i buy new these days are from a manufacturer in the Ukraine: pdt.tools/en/ The small wheel used there is from Winter and came with the S1 grinder.
@mpetersen6
2 жыл бұрын
I have no ida where the name came from but we always referred to the Harig as a Snake Box. have no idea just how many eccentric locating pins I ground over the years in order to bring parts back into spec on machining lines with 35 to 40 years worth of wear in the slides
@StefanGotteswinter
2 жыл бұрын
Neat! I have to say, the spin fixture is so much fun to use, and easy to get precise results :D
@roguecnc788
2 жыл бұрын
Very helpful, thank you
@WarGrade
2 жыл бұрын
An adapted ignition strobe light might work for the final shots
@bigbird2100
2 жыл бұрын
Great video 👍 Would grinding eccentric end to give clearance work rather than separate degree cuts for cut clearance etc.
Пікірлер: 203