Everytime im working on my car I have to search you up because i know ill get all of the information all on one place. Whether its torque specs or just general instructions. Keep up the good work!
@seantompkins2
3 жыл бұрын
Vessel is such a high quality brand!
@readysetsleep
3 жыл бұрын
I first learned about JIS from bicycle mechanics, because all the Shimano derailleur adjustments are JIS screws. My friend in Japan ordered me a vessel screw driver for $3 on Amazon Japan back in 2015. But wow they really expanded their line up now with specialty tools.
@Sprnklrmn
2 жыл бұрын
The knurling on the shank makes such a difference for me. I love their designs.
@DPShopTalk
3 жыл бұрын
I want Megadora Great selection of Vessel tools there. I definitely enjoy all of my Vessel drivers.
@kevinbryski
3 жыл бұрын
Hi Mr Subaru. Thanks for the informational video. Not bad for 33 yrs old! Keep up the good work and good luck with avoiding that arthritis in your hands.
@kevinbryski
3 жыл бұрын
Oh ya - I want Megadora.
@mike216ism
3 жыл бұрын
There amazing screwdrivers. I've bought all the sizes all over again. They fit Phillips better than a Phillips. Very comfy high quality stuff
@chriscas-ToolAficionado
3 жыл бұрын
I want Megadora! メガドラ欲しい! My favourite Vessel tool is their super handy, long-reach, offset/bent handle trim tool. Multiple uses over the years. Catches the attention of everyone who's seen it.
@MrSubaru1387
3 жыл бұрын
Have the p/n?
@chriscas-ToolAficionado
3 жыл бұрын
@@MrSubaru1387 damn it, they were somehow taken off their catalogue. They need to bring it back. I got mine in 2013. p/n is 970 CR-300
@brandonbroderick3717
3 жыл бұрын
I want Megadora Been working on several vintage Japanese bikes and JIS drivers are a life saver
@jdm_mike91_90
3 жыл бұрын
I Want Megadora Those picks look very nice
@chencho7083
3 жыл бұрын
Never heard of that brand before 'till you showed them in your channel...
@qualitytools8116
3 жыл бұрын
I WANT MEGADORA Love Vessel screwdrivers, thanks for sharing.
@edgardolopez6797
3 жыл бұрын
This would be a good start to building my set of tool.I’m tired of asking friends for there tools.When I need something done. I want Megadora .
@Airtayjay
3 жыл бұрын
I want Megadora These videos are incredibly helpful and have saved me a TON of money. Thank you!
@mike216ism
3 жыл бұрын
I have really grown to appreciate Japanese made tools and vehicles. They take great pride in there products. Appreciate the video MrSubaru1387. Excellent information as always. I don't own a Subaru. Just enjoying the channel and content
@12bluex
3 жыл бұрын
I want Megadora I recently purchased Vessel eva foam screwdriver set for my fleet of my Japanese vehicles (ok, fleet may be exaggeration.....four of them). Didn't know why I was stripping some screws until recently. Problem solved!!! Mr. Subaru, hate to tell you this but my evasoft set also came with the Vessel sticker so it's on your floor somewhere.
@MrSubaru1387
3 жыл бұрын
Haha dang it! I've got to retrace my steps back to March!
@big_mike_nyc
3 жыл бұрын
I LOVE my Vessel screwdrivers! For working on my atvs and dirtbikes they are all I use, for obvious reasons! I have the 2200, I have no idea it separated at the ball for inserting bits into! Learn something new every day..😎
@nickbrown5201
3 жыл бұрын
I Want Megadora Just picked up a few Vessel drivers. Loving them
@charlesflores9714
3 жыл бұрын
I want Megadora Very nice tools I have never heard of. I’m glad I came across this video.
@MrSubaru1387
3 жыл бұрын
Glad to spread the knowledge. 👍🏻
@jeffreychan7453
3 жыл бұрын
Interesting tools... I want Megadora
@Nvp8985
3 жыл бұрын
Nice looking tools.
@trevorhill5374
3 жыл бұрын
I want Megadora Never heard of vessel tools. If you are talking about then they must be worthwhile.
@toddoconnor4121
3 жыл бұрын
I want Megadora. Really nice looking tools. Owning Subarus I never knew about the JIS type fasteners. Now I do. Thanks!
@robertshunter
3 жыл бұрын
The number of butchered JIS screws I've seen on Japanese motorcycles is the stuff of nightmares.
@rafaelmarin1963
3 жыл бұрын
Comfort is good for any age(d) grip. I want megadora
@biggiefitz6275
3 жыл бұрын
I want Megadora Some really nice screwdrivers there and a cool video that taught me something new!
@travishamby3479
2 жыл бұрын
Vessel also makes the best hex keys by far. I have never broken or rounded off a vessel and I use them daily
@levihillsman7843
2 жыл бұрын
I got one of the ballgrips on order and its your fault. Lol after seeing your previous tool video and bruising a paw on a screwdriver handle working on an early kubota. Not mad. Thank you for the info and vids. Ill probably order kore
@brianbunten3185
3 жыл бұрын
I Want Megadora Thanks for another great video!
@N1B4ME
3 жыл бұрын
I want Megadora they look like a perfect tools to work on my Subaru Legacy 2016.
@scottk5555
Жыл бұрын
Always wanted to try this brand out
@motoeng
3 жыл бұрын
I've looked through the Japanese Vessel catalog before and never seen those hose remover picks. I knew the foam trays and all of the driver sets were unique to NA, but I'm surprised that they offer actual tools that they don't sell domestically in Japan.
@Renikolous
3 жыл бұрын
I Want Megadora I’ve had the impacta screwdrivers they’re great
@downeastoutdoors8713
3 жыл бұрын
Vessel does make some great tools! Good luck to whoever wins!
@PeriodCorrect
3 жыл бұрын
I want Megadora Those tools are so sweet! Been meaning to buy some to work on my old Japanese cars (Toyota Corona & Datsun 810). Would be sweet to use these for them
@Casisil
3 жыл бұрын
I want Megadora I would love to give Vessel a try, build quality looks amazing!
@harveysmith100
3 жыл бұрын
it is
@flyinhawaiian57
3 жыл бұрын
I want Megadora. Those jawfits are my favorite of the bunch. Didn't know they had radiator picks.
@chowmkjerry
3 жыл бұрын
I want Megadora I got a vessel screwdriver set, super high quality and highly recommended!
@footpusher6405
3 жыл бұрын
I want Megadora Thanks, Mr Subaru. I really enjoy your videos - particularly the live chat with CP a week or so ago. I wonder if you have a photographic memory...
@MrSubaru1387
3 жыл бұрын
Partial. Lol
@desi579
2 жыл бұрын
I want Megadora. Heck its worth the try friend .
@bobmasters9449
3 жыл бұрын
I want Megadora! Nice looking tools.
@justinelliott293
3 жыл бұрын
I want Megadora One of the first videos I watched on your channel was Vessel related!
@MrSubaru1387
3 жыл бұрын
Nice!
@JMBWinther
3 жыл бұрын
Would absolutely love these... Only work on Subaru's and will be looking in to vessel tools now that you introduced them to me, I want Megadora
@TheZyggie
3 жыл бұрын
I want Megadora Just in time, looking to purchase some new screwdrivers
@AJSi-kj1ck
3 жыл бұрын
Awesome tools 🧰 I want Megadora
@victomaru
3 жыл бұрын
I want Megadora been using screwdrivers forever taking off rad hoses didnt even know those picks existed
@princeair
3 жыл бұрын
I want Megadora Those are some quality tools
@cheyenneobregon184
3 жыл бұрын
Looking to get rid of all my Pittsburgh tools because they are starting to make me realize quality comes with price and it saves time! 😭 this would be nice and love the videos you got me hooked and showing my father in law your old ball joint videos and found out how good snap on ball peen hammers are! I want Megadora !
@mrb1864
3 жыл бұрын
I want Megadora . Mega good of Vessel ship that haul out to you .
@juddvear2413
3 жыл бұрын
I want Megadora -never thought of it, but makes total sens: Japanese tools for my Japanese car.
@asrulamru7255
2 жыл бұрын
Vessel makes catapult wire stripper. The best that I experienced so far . That's in addition to their screw drivers famous the world over.
@davidchu2473
3 жыл бұрын
I want Megadora love the impacta. my favourite driver.
@leonardobehrens1204
2 жыл бұрын
So on time, I've been looking Japanese tools lately (engineer for example). I want Megadora
@dougross8043
3 жыл бұрын
I want Megadora Love the Japanese tools!
@pyro23232
3 жыл бұрын
I want Megadora Thanks for the review man! My favorite vessel screwdriver has to be the silver handle impacta for those stubborn rotor screws that always get locked on here in the Northeast. I look forward to learning more from your videos. Peace from Northern NJ. Greg S.
@ParadigmShark
3 жыл бұрын
I want Megadora, they look great would love to try them out
@nitrous07me
3 жыл бұрын
Those look very well made
@jimsauer3810
3 жыл бұрын
I want Megadora. Great tool review.
@MrAsadEp
3 жыл бұрын
I want Megadora Love the vessel ball-grip stuff
@drummer0701
3 жыл бұрын
Awesome video man. I had no idea they made some of those other tools.
@lp2565
3 жыл бұрын
Another tool give away?? I am ready! lol I Want MEGADORA!
@Tellyfive
3 жыл бұрын
I want Megadora Those Vessel handles look very ergonomic.
@harveysmith100
3 жыл бұрын
They are lovely handles
@lockshabaz1876
3 жыл бұрын
I want Megadora really bad!
@timbrown9731
3 жыл бұрын
You’re gonna make us all poor Robert ! lol
@parkersgarage4216
3 жыл бұрын
I want megadora I've been meaning to try out vessel for quite some time now.
@determineddad7935
3 жыл бұрын
Like them! Could use a vessel screwdriver megadora set for the Forester!
@stormsilagy5744
3 жыл бұрын
I want Megadora My first vessel screwdriver was one of the ball grip #1 jis, it works way better for phillips screws. I like it better than the wera it replaced. Still a big fan of wera as well
@dreadeadus7778
3 жыл бұрын
I want Megadora I'm a subaru tech and been thinking of buying strike through flat head for that exact purpose.
@caseypekarski4268
3 жыл бұрын
I want Megadora. I should really look into a set of jis drivers for working on my Subarus
@timandrews5730
3 жыл бұрын
I want megadora. I could use any tools I can get just starting to get into the automotive field.
@kevinm5177
3 жыл бұрын
Cool stuff! I want Megadora.
@sweetassugar2076
3 жыл бұрын
Good stuff I’m gonna have to pick me up some of them Screw drivers!
@johnlee7199
3 жыл бұрын
I want Megadora Nice overview!
@ericlanam4265
3 жыл бұрын
I want Megadora I really want to get some JIS screwdrivers now. I had some sidemirror screws beat me into sub!mission last week. Try must've been JIS. ☺👍
@master_moose
3 жыл бұрын
I want Megadora Thanks again for everything!
@MrSubaru1387
3 жыл бұрын
You're welcome 👍🏻
@toshmiller5571
3 жыл бұрын
I WANT MEGADORA Just getting into the Japanese tools
@MrSubaru1387
3 жыл бұрын
Congratulations, you're winner number two. If you would, please respond with your email address. Thanks.
@jmwintermute1
3 жыл бұрын
Question on the Vessel’s. Are they all JIS? As I just striped a combo screw/bolt on my Mitsubishi Pajero using a vessel screwdriver purchased in Japan. Luckily I was able to use a 10mm socket to remove the fastener. Could just be that I was wrenching on a 20 year old SUV.
@havokmaster2
3 жыл бұрын
Im really surprised you did talk about the reds or silver handles or the 980 series megadora.
@mikearsenault8020
3 жыл бұрын
I want Megadora! I have not got the chance to try these tools and wold love to get a chance.
@_Epictetus_
3 жыл бұрын
I would love to have these. I don't have any japanese tools!
@neokyra
3 жыл бұрын
I want Megadora I'm looking forward at getting those ball end grip Vessels in the near future, please let us know how they are.
@cazadorpr3620
3 жыл бұрын
I want Megadora. Have them on my wish list for Amazon.jp. Have been loading on Koken and next is Tone spanners and Vessel stuff. Having hard time identifying what is JIS and what isn’t.
@arturojuarez6237
3 жыл бұрын
I want Megadora 🤞🏼🤞🏼
@MOONARCH420
3 жыл бұрын
I want Megadora Going to take out my first subaru engine soon! I want that chisel driver thing lol
@powlimited
3 жыл бұрын
I want Megadora Can't go wrong with MIJ stuff
@brotherbrian1
3 жыл бұрын
I want Megadora. Been meaning to get some of their tools to try out.
@dewaynek8591
3 жыл бұрын
I want Megadora!
@dales.2522
3 жыл бұрын
Would love to have a set.
@toolsmetals2148
3 жыл бұрын
I want Megadora
@van1196
3 жыл бұрын
I want Megadora.
@THEDRAGONBOOSTER8
3 жыл бұрын
I want Megadorra..
@mmatth2194
3 жыл бұрын
I want Megadora...please.
@patrickcallahan2210
3 жыл бұрын
I want Megadora :)
@bobbark9345
3 жыл бұрын
I want Megadora too!
@onlywithchrist769
3 жыл бұрын
Do you have to have oem to replace rack and pinion??
@urangafamily3811
2 жыл бұрын
How do I go about purchasing from Amazon Japan vessel
@beardedtoolreviews7185
2 жыл бұрын
I’ve heard a lot about vessel will these be good to use on regular Philips and jis? Do these beat the Matco screwdriver set? Thanks
@skibiker42
3 жыл бұрын
A drive set would be nice however more importantly a question. How long did you work on Subaru’s then found out you needed JIS driver’s? I want Megadora.
@wim0104
3 жыл бұрын
modern "Phillips" bits are not as hardcore as the original, plenty of tweaks & changes to the flank angle.
@skibiker42
3 жыл бұрын
Phillip’s were designed to roll out so they could never be torqued down. All electronics fixtures are JIS as well but on much small screws. Thus why Posi Drives were needed for the big guys.
@MrSubaru1387
3 жыл бұрын
Longer than I'd like to admit. 😂
@skibiker42
3 жыл бұрын
@@MrSubaru1387 "Birds of the Feather" we are.
@davidaud4652
3 жыл бұрын
@@skibiker42 I'm sorry, what does JIS mean? Does Posi mean positive?
@ivanfromtexas5858
3 жыл бұрын
@MrSubaru1387- Do you have the link to the thread of the Subaru owner in New Mexico that drove 1,000,000 miles? I can’t find the video where you had the link to the thread.
Пікірлер: 272