Grab some sweet all-weather floor mats for your Tacoma and use code TACOMA3D10 for a $10 discount off of your order: bit.ly/3smAdGu
@theeemightybuck1
10 ай бұрын
I got my first Tacoma a month ago. Didn’t know the community behind it. Best cult ever
@jonnewbury3482
2 жыл бұрын
The screen protech for the gauge cluster and radio were one of my favorites. Hides all the annoying scratches from plastic gauge lens and reduces glare in the radio.
@adrianbernardo619
2 жыл бұрын
Who doesn't enjoy stopping by for a quickie
@GreatChopps
2 жыл бұрын
I am looking forward to doing the tail gate and hood strut mod once I get my new one, moving from a 2001 to a 2022
@patrickhotra9241
2 жыл бұрын
I added a cold air intake to my 2018 tacoma, and when I tried to install Spyker hood struts, found that there was only room to install the driver side strut. I found it to be weak at raising the hood unless I helped it out. A few months ago I contacted Stryker to ask if they made a heavy duty strut for my application. They do and it installed on the brackets used by the original strut. It was about a one minute install. The hood now raises with just a nudge, to its full height.
@BudzyFoxMX5
2 жыл бұрын
*hot air intake
@CDCLLC
2 жыл бұрын
Spotter mirrors are definitely worth the money.
@blue39503
2 жыл бұрын
My driver's side mirror went all wobbly last week. I did a temp epoxy repair but now I need to find a new set of less wonky side mirrors.
@robertbutcher4201
2 жыл бұрын
Hood struts, wish I did them years ago. Need to look into that mirror upgrade.
@stephenalbrecht2290
2 жыл бұрын
All are awesome. Thinking of trying to do the tailgate panel
@dreashirlene3285
2 жыл бұрын
Redline hood struts ….. one of my favorite mods as well as getting the factory bed mat! Might need to upgrade my mirrors now… my wallet thanks you 😂
@Tacomaholic
2 жыл бұрын
Love both of those.
@goforbroke2
2 жыл бұрын
I didn’t even know Mobtown closed, that sucks. Good guys down there in DE.
@Tacomaholic
2 жыл бұрын
Yeah great company. All of my skids are Mobtown too.
@goforbroke2
2 жыл бұрын
@@Tacomaholic All of my aluminum skids and sliders came from them. Along with a tailgate reinforcement kit. Everything I got from them has been quality.
@michaelhan27
9 ай бұрын
Metal prop rods won't fail mid work. Struts can, and will fail at the worst time.
@timfrancis6774
2 жыл бұрын
All of them are awesome, going to call 2tpam place cause thinking about putting a atoto unit in mine cause of backup cam and need GPS bigger as well
@TwistedOmYoga
2 жыл бұрын
This is great! My wallet can’t take anymore but I’ll be damned if I don’t buy those last two items lol thank you for sharing.
@daveweber9737
2 жыл бұрын
The T2Pam only works on the later 2nd Gens. It won't fit my 2006 .
@mnnm2330
2 жыл бұрын
I'm interested in adding a transmission cooler for my 2nd gen. Have you ever thought of doing one for improved towing in high temps and offroading in high temps?
@Tacomaholic
2 жыл бұрын
I have a TRD Offroad Tacoma which comes with a transmission cooler, but there are write-ups for how to add one.
@mnnm2330
2 жыл бұрын
@@TacomaholicThanks for the reply! I have a 2013 TRD Sport that has the transmission cooler as well. I've towed a few time with camping gear and a 16 foot aluminum boat. I was suprised by the transmission temps I was seeing on my digital guages when going up grades. I put it in 4th so it doesn't hunt for gears going 60 mph. Saw temps climb fast and luckily was only at 220 degrees for a short while. I believe on my guages TRANS 2 is at the torque converter and TRANS 1 is at the transmission oil pan. The torque converter was at 220 while the pan was 180ish. Curious if you've seen temps like that? I purchased an OBD2 scan tool to monitor, OBD2 MX+.
@Tacomaholic
2 жыл бұрын
@@mnnm2330 My trans temp has always been stable but I've never towed anything.
@susanfreeman6350
2 жыл бұрын
Forth!! I like the tailgate mod the best!
@The_Bearded_Jay
2 жыл бұрын
Do you have a link for the hood strut? I didn't see it in the description. Cheers, bud!
@Tacomaholic
2 жыл бұрын
Yessir here are the ones I'm running: amzn.to/3ynZ5ke
@The_Bearded_Jay
2 жыл бұрын
@@Tacomaholic thank you, sir! I did search for them myself, for the record, but wanted your affiliated link. 😁
@Tacomaholic
2 жыл бұрын
@@The_Bearded_Jay Thanks man!
@stevedapirate5
2 ай бұрын
I think he is a fed.
@rhllnm
Жыл бұрын
Those tailgate panels are ridiculous. $200 for a piece of flat plastic. Gonna try your suggestion.
@BudzyFoxMX5
2 жыл бұрын
Any thoughts on bed stiffeners? My 2011 was recently totalled and I picked up a 2015 TRD Pro two days ago. It has bed stiffeners already installed.
@Tacomaholic
2 жыл бұрын
I'm running some Total Chaos bed stiffeners. In addition to providing support for the bedsides, they are great places to anchor things.
@angell6425
2 жыл бұрын
Do you have a video for favorite interior mods, particularly phone mounts or anything like that?
@Tacomaholic
2 жыл бұрын
I've got this older video ( kzitem.info/news/bejne/mJWV34Woo6t2aX4 ) which goes over some great inexpensive mods, and here's my playlist for all interior-related vids: kzitem.info/door/PL-IN_9dyC2sC_yFhO0OE5ERhdMCxRPrfN
@Tacomaholic
2 жыл бұрын
@@angell6425 Any time.
@PhilDotZap
Жыл бұрын
Where did you have your door decal made?
@Tacomaholic
Жыл бұрын
The gray diagonal thing is just part of a GOAT Armor set that I cut.
@JohnMuise
2 жыл бұрын
The 3tpam is nice but hard to find and costs your first born child.
@alexs825
2 жыл бұрын
It is not possible to do all the Tacoma mods. Physically impossible. More are created every day I swear
Пікірлер: 43