Point 6: don't get pedals cuz they're trendy or you want to impress people on the Internet. Get pedals you genuinely like, don't get them for internet points or for show. You'll end up regretting it and selling it.
@GoodwoodAudio
3 жыл бұрын
I Like this one. Very good point.
@garrettbabcock9024
3 жыл бұрын
You mean I don't need the strymon trifecta to get instagram likes??!?! You just saved me 1200 bucks!
@dirgmario
3 жыл бұрын
@@garrettbabcock9024 haha I know it’s a joke, but the Strymon Trio is super overkill for 99% of players and overkill for 75% of the actual owners.
@TotalEvo7
2 жыл бұрын
@@dirgmario That's why I'm going with a Collider and a Synesthesia
@Billkwando
Жыл бұрын
I've been buying a pile of cheap amazon mini pedals, because you can get an armful for the price of one boutique pedal, and you always have 30 days to return if you don't like it.
@andy_watt
3 жыл бұрын
A video on troubleshooting pedalboard issues/understanding your signal chain feels like a must. It would be great to get your insight into how to go about fixing an issue, and also some best practices when designing a board to minimize the chances of them occurring, or with failsafes built in to minimize the down time.
@GoodwoodAudio
3 жыл бұрын
Noted!
@dradbelson2736
2 жыл бұрын
Me: Laughs in Boss GT100
@getvicky13
3 жыл бұрын
Oh man...point no.4 about understanding your signal chain has gotten me through so many issues on stage!! When I do experience pedalboard issues, it's during soundcheck, and I always carry extra patch cables, power cables and a multimeter to check for stuff that might have gone wrong. It's almost always a bad patch cable.
@GoodwoodAudio
3 жыл бұрын
Not a Goodwood Cable I hope. If so - make sure to email me! You carry a MM! Well done. You've got one up on me. Great idea.
@lynyrddeville
3 жыл бұрын
This video was so no nonsense good I decided to subscribe immediately. Now, I am off to see all of the other great content that I have missed from Goodwood Audio!
@GoodwoodAudio
3 жыл бұрын
Too kind! Thank you. If you see a video that hasn't been done yet, let me know!
@danielmccabe2805
3 жыл бұрын
Another one I would mention is what you're using to secure your pedals- Velcro works for most, but some are heavier with awkward bottoms or screws or feet in the way. Something I've run into is having my MXR stereo chorus on the board. The bottom is just a big, dual battery compartment (18v pedal). Im somewhat aware of the risers and things out there but have never explored that, and velcro isn't always the best. Also, I mount a Voodoo Lab Mondo on the bottom of a homemade pedaltrain-style board with 10lb velcro and I feel like it still needs a couple zipties. I'd be interested to hear what you'd recommend. Maybe do a whole video on pedal mounting and dealing with battery compartments and all of that annoyance. Thank you for these awesome videos! I feel like you've definitely touched on the essential points of building a rig. You're approach is easy to understand and quick to the point. Keep up the good work! 🤘
@gcvrsa
2 жыл бұрын
I find it much more convenient to keep my tuner pedal separate from my pedalboard. That way, my board can go on stage, and I can tune backstage, or I can tune my guitar at home without firing up the whole pedalboard. And then I get to fit another pedal on my board. I can always leave an extra power lead on the board to power the tuner once I get on stage. Biggest pedalboard mistakes, according to me: 1. Placing pedals too close together. 2. Placing pedals in an illogical order unrelated to your signal chain. 3. Using loop switchers when they aren't needed. 4. Using isolated power when it isn't needed. 5. Using too many pedals. 6. Not thinking about the ultimate size of the board and how it is going to be transported. I have made the decision that all future boards must fit inside a standard airline underseat flight tote/personal item, and still fit a change of clothes and toiletries for a weekend, personal electronics (iphone, ipad, chargers, headphones), and in-flight snacks. That way, I can fly with my instrument and everything I need for a weekend fly gig as cabin baggage. My pedalboard design is 390 mm x 290 mm, or about 15.5" x 11.5", a flat board only.
@GoodwoodAudio
2 жыл бұрын
I like it. I think you're right...if you do short fly dates, carry on is a HUGE perk.
@JAF2991
2 жыл бұрын
Good list, but I personally think, in my opinion. Isolated is ways necessary.
@gcvrsa
2 жыл бұрын
I make pedalboard layouts by taking high resolution product images and dropping out the backgrounds and resizing them to life size in Photoshop. Then I use a a diagramming program like Microsoft Visio to lay out my pedalboard at life size with near-perfect accuracy. Visio also has the ability to create signal chain routing.
@GoodwoodAudio
2 жыл бұрын
Sounds like a ton of setup, but once you have the basic pedal sizes, sounds like a dream. Might have to look into this.
@silverlightphotodesign
2 жыл бұрын
Lots of great advice; thanks for posting and sharing....I would like to see more visuals paired with your advice.
@GoodwoodAudio
2 жыл бұрын
thansk for checking it out. Appreciate the feedback! Taken on board.
@mattfleming2287
Жыл бұрын
Keep a backup, keep it simple and know your gear inside and out.
@theaaronimal
3 жыл бұрын
Oh man, option paralysis is a real thing. Great tips!
@GoodwoodAudio
3 жыл бұрын
Thanks Aaron!
@holmesy321
3 жыл бұрын
I'd love an in-depth on point 4! 'm always carrying a few spare patch cables, power cables of various lengths with me. And, since I moved to using (and heavily relying on) the HX Stomp for amp modelling and most of my modulation/drive, even keep a couple of spare pedals (overdrive and a simple delay/verb) in an old flight case!
@GoodwoodAudio
3 жыл бұрын
I actually did a 4 part series on signal chain - check earlier in our channel and you'll see it! I was actually quite surprised by the results of that series... I learned a ton doing it.
@Billkwando
Жыл бұрын
LOL none of my pedals will need updates...didn't even realize that was a thing
@absea7918
3 жыл бұрын
Great tips. I agree with all of them. I'd only add that if I have an issue with my board playing live, and I can't solve it in 10 seconds, I plug straight into my amp. Have a spare Snark tuner sitting on your amp if you need it. I had to do one show like that, and no one noticed - which also raises the point of how important the boards really are... :)
@GoodwoodAudio
3 жыл бұрын
I like that!! Very good idea and so true. I am choosing to ignore the part about boards not being important though. Hurts my heart to read that - although I've experienced similar things along the lines of, "... oh, you were playing? Didn't notice" haha
@absea7918
3 жыл бұрын
@@GoodwoodAudio Thanks! Don't get me wrong, my board is important to me, and helps in my creativity makes me want to play more. Also for recording, its great to have the ability to shape the sounds. My experience playing live is probably more about the quality of the sound at the (small) clubs I played at - which was poor. At a proper venue with legit sound system, people notice the more differences a good pedalboard makes.
@GitarmanBob
3 жыл бұрын
Rhett Shull did a tour blog video about a year ago where he landed in England, gets to a gig with 10,000 people to find the TSA had half-disassembled his board. He played straight through the back line amp (think he said it was a VOX AC-30). Fun video, you can go to his channel and find it easily.
@Billkwando
Жыл бұрын
What about remembering where the input and output jacks are, for signal flow, if you're going to run two rows. You need a longer patch cable to connect the pedal on the bottom left to the one on the top right, if you're going right to left (the only way that makes sense).
@dbutler721
3 жыл бұрын
You mentioned setting up your board and signal routing for playing live. Can you do a video expanding on the situations that one may encounter playing live and how to set your pedal board up for that, to be able to handle any house situation? Thanks.
@GoodwoodAudio
3 жыл бұрын
Good idea. Noted!
@ryanwhite5482
3 жыл бұрын
I can't reinforce enough thinking about your feet. I didn't do this and lived with my volume pedal on the wrong side of my pedalboard for 8 years because the board was wired and drilled that way. Finally rebuilt the board with it on the other side
@GoodwoodAudio
3 жыл бұрын
Ouch!
@sseltrek1a2b
3 жыл бұрын
yup...everything needs to be reachable and usable for what you do- there's nothing worse than having to be super "accurate" when stomping on something, or things you use a lot during a set being spread all over the board...
@2Plus2isChicken2013
3 жыл бұрын
A couple of things I suggest on this subject are: 1) Consider the weight of your pedalboard. There are many kinds of boards made of all sorts of materials, some heavy and some light. Go for the lightest, best-made one that can hold what you need. 2) Always carry a good clip-on tuner, extra distortion pedal with power cable and extra instrument cables in your guitar case. If you do this you don't even need to worry about your pedalboard having problems because you can just switch to using that extra pedal and clip-on tuner and you'll be able to make it through with the bare minimum needed to finish the set. You can worry about fixing the board later when it's actually convenient. You could even pack a multi-effects pedal in case you absolutely need delay and other effects in the songs you're playing.
@GoodwoodAudio
3 жыл бұрын
Nice feedback! You should check out the latest interview we posted with Marcus (fleetwood mac tech) he takes these redundancies to the next level and essentially says you need a quick solution to a rig going down mid set. I found it very helpful actually.
These are great tips. My concern would be more of what my amp backup situation is if my amp fails? I usually carry extra power and patch cables for my board but if that doesn’t work, I’ll just bypass it completely into my amp. Now, an amp not working is a bigger issue. Whether I take an amp sim pedal or extra power amp (44 magnum) or both, I’ll always have a backup. I’ve never had to go DI at a live show but my 44 magnum has saved me before and did a great job. Guitar is also important. Always have a backup guitar. My other guitarist and I share a backup guitar in case strings break, etc.
@GoodwoodAudio
3 жыл бұрын
Totally. Amps are tricky. Amp sim is ideal, but even just having some spare power tubes (pre-amps are pretty reliable) and a few spare fuses can go a long way. In my experience, whenever there is an issue with tube amps, 90% of the time you can fix it with new tubes / replacing a fuse.
@terryeaster1
8 ай бұрын
I've spent a month working on my new layout... I may have lost my mind yesterday
@JeffHendricks
3 жыл бұрын
"If you use a volume pedal that could break, maybe it uses a string..." If I had a dollar for every EBVPJr user that posted "Well, I thought it would never happen to me" I would be independently wealthy.
@GoodwoodAudio
3 жыл бұрын
haha - out of all my points, I thought I'd get the most crap for that - glad to hear Im not alone!
@coryholte5305
3 жыл бұрын
For everyone using the VP Jr... stop... buy the Lehle Mono Volume... best volume pedal I’ve ever owned
@getvicky13
3 жыл бұрын
Point No.6 - Carry some sort of amp sim pedal as a backup to your real amp.
@GoodwoodAudio
3 жыл бұрын
I like it! And have the power tap available to power it!
@Cam_B
3 жыл бұрын
Do amp sim pedals need a DI box to convert to XLR as well?
@garrettbabcock9024
3 жыл бұрын
@@Cam_B as a sax and guitar player I've found the d i box a must have for any fx rig and having some kind of amp in a box with extra patch cords and xlr cables. I actually ordered a stereo di so I can run wet dry wet on my sax rig.
@garrettbabcock9024
3 жыл бұрын
@@Cam_B any amp ir pedal you wanna run as a back up, depending on the situation, could theoretically still go straight into the board with 1/4 inch inputs too but sound guys would probably not mind if you had the xlr out.
@Cam_B
3 жыл бұрын
@@garrettbabcock9024 thanks! So, is there an overall benefit of using DI for xlr like sound wise? Is there maybe less hum? I know that there are usually those multiple xlr jacks on stage (I forget what they are called) so that would probably make it easier to go to the board. I’m not sure how you would run 1/4 to the board other than using a super long cable unless those xlr inputs on stage allow for 1/4 too. I’ve never gone directly to FOH live but I’m getting more and more curious.
@bradconklin2878
3 жыл бұрын
Funny... I always forget the tuner in favor of an actual "sound" pedal on my limited space pedal board, and use a snark, or other "Y".
@GoodwoodAudio
3 жыл бұрын
Its a good call if you're into those tuners for sure... more sound = more fun.
@joellebrodeur1015
3 жыл бұрын
I always use clip on tuners. Switched from Snark to D'Addario mini tuner
@mikehancho7172
3 жыл бұрын
bruh the first part about the tuner. i subbed instantly. way too close to home lol
@GoodwoodAudio
3 жыл бұрын
haha. Sorry it evoked such real emotion!
@jeffralston450
3 жыл бұрын
Always have a cable tester with you. The $30-50 is so worth it. Makes trouble shooting a breeze. Also, If you patch cable shows anything intermittent, fix it if possible or right in the trash.
@GoodwoodAudio
3 жыл бұрын
Agreed! Cable testers have saved me so much time and stress.
@Souldoubtrocks
3 жыл бұрын
Mason sent me. So glad he did.
@GoodwoodAudio
3 жыл бұрын
I'll have to say thanks!
@PinchTune
3 жыл бұрын
LOL. "I'm not changing this setup for the next two years." [ Two weeks later - completely rearranged ] Good talking to you today! -Danny
@GoodwoodAudio
3 жыл бұрын
you too Danny!
@evanpowers1795
3 жыл бұрын
Question on "Interfacer", Is the tuner out also a buffered out? Reason, considering using Interfacer buffered out AND tuner out for parallel signal chains ( lots of ambient noises with less mud, possibly one more "dry" for clarity). If both outputs are buffered, you may consider promoting this option!
@evanpowers1795
3 жыл бұрын
Also, the Interfacer mute switch would make a cool kill dry all wet mode, since tuner out would not mute ( wet effects )!
@GoodwoodAudio
3 жыл бұрын
The Interfacer actually has a few extra tricks up its sleeve including a line mixer (left and right inputs) accessible via internal DIP switches (new models since mid 2019 only). I did a video specifically on how to use Interfacer for Wet Dry / Wet Dry Wet... its called "Alternate uses for TX Interfacer, TX Underfacer and Output TX". Glad you picked up on that! Very cool
@GoodwoodAudio
3 жыл бұрын
You can also adjust the mute switch with the above to mute dry only.
@silverxbladeX
3 жыл бұрын
Love this video! Can you do one on how to plan out a pedalboard using virtual pedalboard planners?
@GoodwoodAudio
3 жыл бұрын
Noted!
@Sharkbate211
3 жыл бұрын
Always leave an inch between pedals for cables. Even the flattest still have a decent gap
@sseltrek1a2b
3 жыл бұрын
also- if you're making your own cables, test every single one (no matter how small) by plugging into your guitar and amp...having one bad cable and having to re-assemble your board once you find it is very annoying...
@GoodwoodAudio
3 жыл бұрын
Getting a cable tester is gold for this. There are a few out there (Cusack makes one, and other companies) for a very fair price.
@marktaylor4615
3 жыл бұрын
What do people use to label their cables?
@GoodwoodAudio
3 жыл бұрын
Check out Brother Label makers... Pretty affordable and well worth it.
@Wells306
3 жыл бұрын
Don't use solderless cables. Keep it simple- omit the pedals you only use once in a blue moon or consider good multi-effects. More gear + more cables can lead to more obstacles. Don't cheap out on the essentials, but don't feel it necessary to mortgage your house for that new gear. Plenty of really good options don't cost a lot.
@GoodwoodAudio
3 жыл бұрын
Well said!
@joellebrodeur1015
3 жыл бұрын
I have a solderless kit, but ended up getting a different cable set. A friend of mine told me not to use them for a reason that I can't recall offhand.
@heyou429
3 жыл бұрын
Option paralysis is real
@GoodwoodAudio
3 жыл бұрын
been there too many times.
@joellebrodeur1015
3 жыл бұрын
This is so. I'm new to pedals and have 6 (chorus, modulation delay, delay/looper, shim reverb, fuzz and OD). I probably will only use 4 out of the 6.
@GoodwoodAudio
3 жыл бұрын
@@joellebrodeur1015 I like that. Better than feeling like you have to use every pedal in front of you and using effects when they aren't needed.
@mattsmitchger259
3 жыл бұрын
So glad I'm not a pedal guy. Sounds like a pain in the ass.
@GoodwoodAudio
3 жыл бұрын
haha. what do you use?
@mattsmitchger259
3 жыл бұрын
@@GoodwoodAudio Usually just guitar straight through amp with the amp's reverb. I have several distortion pedals, a delay pedal, a wah pedal. Never use them. It's just not my thing. I use an MXR distortion + quite a bit. But that's it. I believe less is more. And I actually play a lot more when I'm not screwing around with 1,000 different knobs. Pedals are no friends of OCD. 😆
@GoodwoodAudio
3 жыл бұрын
@@mattsmitchger259 I like it! I need more of that in my life. Recently moved and couldn't bring the majority of my gear... Been refreshing. But I know I'll miss it all soon haha. So true that having too many pedals stops you from playing though if you aren't careful.
@mattsmitchger259
3 жыл бұрын
@@GoodwoodAudio Nothing against pedals. I'm into classic metal and rock. Tonny Iommi, Angus, Keith Richards, Joe Strumer, etc. All my favorites never needed any of that. But they're fun sometimes.
@PedalExperiments
3 жыл бұрын
Pedal guy, here. You're right. 😂
@eventidewinds
3 жыл бұрын
who wants a chase bliss pedal, overhyped;-)
@GoodwoodAudio
3 жыл бұрын
haha
@TheEleventeen
3 жыл бұрын
X🤘🏻X
@GoodwoodAudio
3 жыл бұрын
yew!
@rustysmalls
3 жыл бұрын
The pedalboard in the thumbnail is one of those horribly overcrowded, the guitarist would be lost without it types
@GoodwoodAudio
3 жыл бұрын
Its full. But a lot of guys love it. do you take more of the guitar / amp approaches with a couple staples in between? Would love to know what amp you use if so!
Пікірлер: 95