Nice video, I have a gen 4 full auto. I run modified v2 mags, where the functions of spring release and ball retention have been relocated to the bottom of the upper receiver. Modified selector switch, and aftermarket barrel stabilization. There were some major issues with the T15 platform, but over time I fixed them. I have a video on my channel detailing the mods if you are interested.
@banshee107
Жыл бұрын
What is the name of the video? Can you send the link.
@Bleatedbowl2704
Жыл бұрын
@@banshee107 would like to know too
@johndaviddoesmith4504
10 ай бұрын
Your true “safety selector “ should be your finger
@mightymouse8095
Жыл бұрын
Been using my MCS bolt for the last 5 yrs........Always works and on occasion it has it's FSR flips. Only thing I did was put a HH barrel on it. I have a T-15 also and had to put back in trunk a few times because it just wasn't shooting......The MCS bolt always came thru..Bolt was demoted for back-up duties as I bought an EMF 100.......
@magfedranchpaintball
Жыл бұрын
What magazine were you using with the MCS Bolt?
@mightymouse8095
Жыл бұрын
@@magfedranchpaintball Helix.....A guy makes a magwell for bolt,blizzard markers that fit T-15 mags and I've been using..Since I made the switch the MCS boltt has been fantastic!!
@magfedranchpaintball
Жыл бұрын
@@mightymouse8095 when you get a flip with the T15 mags what direction is the FSR facing? When you look inside the chamber do you see the nose or the tail?
@mightymouse8095
Жыл бұрын
@@magfedranchpaintball I see the nose..I presume this because nipple on FSR's..A little notch should correct this? I'm gonna use stock barrrell and use a dremmel to put a little notch were FSR loads in
@magfedranchpaintball
Жыл бұрын
@@mightymouse8095 are you using the 11rd or 19rd FSR mags?
@streetcleaner_0000
Жыл бұрын
what output pressure on your tanks? the sweet spot is 845 to 860 but have all your tanks relatively close to each other,my selector switch is fine and I have the full auto kit on mine,I'm sure there is a way to tighten that up.Of course you need to fine tune the barrel detent screw according to what barrel you are using but that's part of owning one of these. I love mine but yes I had to go through the fine tuning process(dialing it in) but I think you need to know your marker and be able to do most stuff on it.Just put some black gorilla tape over the hopper cover....lol modification. Hopper on a T 15 ? .....a special place in the dark corners of the universe for those people...
@adelonmachina792
Жыл бұрын
@magfedranchpaintball For self defense purpose, can T15 tune and hit until 500 fps, someone tell me the blowback system is the problem for that. And can it rechangeable to real AR receiver body, I'm quite interesting with it.
@magfedranchpaintball
Жыл бұрын
It is not capable of achieving 500fps. The adjustment screw has a max limit of aprox. 320-330 FPS before it will back out completely. No the body while looking like a real AR is not interchangeable.
@dopemopey
Жыл бұрын
It's an ICD Cat style blowback. Not Spyder. And not to be nit picky, but can you please stop doing that tongue click thing? It's horribly loud in my headphones.
@sonderstudios6675
5 ай бұрын
I think it's about user error. And, the m17 is trash.
@kalebdoom7944
Жыл бұрын
this gun is obviously a problem child. but it is worth it when it works
@justalpha9138
Жыл бұрын
Honestly I've had very few problems with it so far and I really enjoy my T-15
@justalpha9138
Жыл бұрын
@@The.Toaster You must have changed some settings in the bolt to really mess with the cycling, or you may have adjusted the recock screw so much to the point where it no longer cycles properly. I truly have had very few issues with my T-15. This year at Monte Cassino hosted by Paintball 2 Go, it was muddy, it rained on Saturday, and the paint was terrible for me, yet despite all of that, it still worked.
@justalpha9138
Жыл бұрын
@@The.Toaster As for the leaking issues, if you're using the buffer tube adapter like I am, its actually really simple to fix the leaking issues: put on some teflon tape onto the fill nipple threading and screw the fill nipple in from there. I've never had any leaking issues since, and even before I figured that fix out (largely my own fault that I didn't put on some teflon tape to the fill nipple screw much earlier), the leaking issue wasn't that big of a deal since I could just disconnect my air source when I wasn't shooting. Now though it serves me even better than before.
@justalpha9138
Жыл бұрын
@@The.Toaster That's most definitely not supposed to happen. My T-15 has been serving me extremely well ever since I bought it last year.
Пікірлер: 26