My girlfriend always tells me I never sound interested in what she has to say…now I can tell her it’s her monitoring system 😂
@JasonSadites
Жыл бұрын
Bahahaha 🤣
@skywlker1763
Жыл бұрын
Man I love your videos. I play mostly high gain stuff but all of this still applies and continues to help me figure out my Helix.
@eyszeit1821
Жыл бұрын
On Reverb "Mistake" - I always put the Predelay ~ 40 ms to have the direct sound first and then the Reverb is comming up. This is preventing that the guitar is "buried" in the Mix/Band ;)
@rockerbuck967
Жыл бұрын
Point 1 is spot on. I used disable that in any preset so I could hear what the real cab would sound like. A Vox speaker can in no way sound like a Marshal speaker, so I never asked to do that.
@MeanMaoriMean555
Жыл бұрын
Thanks for the reality check Jason. This is very sobering. You rock!!
@JasonSadites
Жыл бұрын
My pleasure and really glad it was helpful!
@BrokenDreamRox
Жыл бұрын
As someone who went digital in the early 2000's I would add proper output etiquette, maybe as the number 1 issue rock and metal players suffer from. When you're used to 0db being your target with every audio device you've used, understanding that more isn't always more when it comes to output cab be hard to get your head wrapped around. Second in my opinion is EQ or the lack of it. All the rest of the usual suspects you nailed.
@GeorgeAmodei21
Жыл бұрын
Always Great to get something out of your Vid’s. Thx Jason
@saucerfullofzepp4203
Жыл бұрын
Just wanna say- YOU ROCK!! Thank you
@JasonSadites
Жыл бұрын
Ahh thanks so much :-) My pleasure!
@void_snw
Жыл бұрын
Just on the first point: I use DT770's and they have that Beyer treble spike. I use oratory1990's / Autoeq's EQs to make my cans match closer to the harman target. On my PC with an IR, and on my HXStomp with 2 stereo parametric EQ blocks and the global EQ. It takes away two blocks (one can be skipped because it doesn't do much) but man is it worth it. Obviously when recording, I have to apply the opposite EQ to the recording so it sounds the same to everyone. If you use headphones I can only recommend looking up your cans and if they have a harman target EQ in his list, and to try it out. DT770's really only need their low end and treble spike checked, the mids can be left alone (this takes me from 2 EQs to 1 EQ block) and I won't go back.. It's in every single preset :'D
@void_snw
Жыл бұрын
OH! And don't use the 10 band graphic EQ for this. It's modeled after a pedal so the Qs are non-standard and the lowest and highest frequencies are shelves instead of bells. I also wanna add a point to the video: People are always trying different pedals and amps and effects and settings but they rarely take a deep dive into cabs / mics / IRs, yet they make HUGE differences instantly.
@sseltrek1a2b
8 ай бұрын
great point about delay...the over-washy delay will be great for particular moments, but in a mix it's a disaster...general rule is that effects are like make-up: they should enhance, not "be" the sound...
@mynameismudd1518
Жыл бұрын
I go from Tonex straight through channel Mic/Line 1 input of my PA and it surprisingly sounds amazing. But I guess that's what its made for HAHA. Great Info Jason.
@scottnorton5670
Жыл бұрын
This is how I use my headrush for live play as well. I just nabbed a Tonex. Good to know I can do this.
@ronaldpennington3858
Жыл бұрын
Thanks Jason. I’m new to helix I hope I can catch on to how to come up with those great tones. Ron
@JasonSadites
Жыл бұрын
My pleasure and glad you enjoyed :-)
@Alex_Martz
Жыл бұрын
The MOST common mistake when using plugins is that people do not feed their guitar signal level correctly on their audio interface!, they either go too high or too low and that's why their sound is different than on the preset!
@dillontaylor8035
Жыл бұрын
Hey! Love you vids! Can you make a video from start to finish on your method of capturing a tone x model with a mic. Including every detail?
@israelr6636
Жыл бұрын
Very insightful video, thank you. Killer riffs by the way🤘.
@JasonSadites
Жыл бұрын
Thanks so much and really glad you enjoyed :-)
@dreadnotpop
Жыл бұрын
Do you have your guitar volume turned all the way up when you demonstrate models and presets?
@boabglen
Жыл бұрын
I wish you'd do videos zoomed in on the actual helix instead of the studio. Not everyone uses the studio
@Burkhimself
Жыл бұрын
My experience has been people that play with too many or too much effects on their sound will not change them until they hear themselves in a mix or from a live recording……
@nicolasaraistrujak208
Жыл бұрын
so, on mistake 1, if I use my multieffx as a interface, and use headphones as monitors, watch a video that shows me how to configure a metal patch, copy the same exact patch from the video on the same mutieffects, and when I test on my multieffects the same exact patch and it sounds different, then is the difference is on my guitar?
@rudolfbagusat9267
Жыл бұрын
Thnx 🙂
@mikelurra9853
Жыл бұрын
hello jason good video playing with diferent modelers , and trying in a diferents audio interface , i have amazing tones direc monitoring but when i record this sound it is a lot brighter than direc output , if dial to have good tone recording , direct output is very dark , that happen to me in every convinations a have done do you know why it can be ? thanks
@Newnodrogbob
Жыл бұрын
I know that I like too much reverb. It’s not to cover mistakes; I just like sounding like I’m playing in a cathedral, lol. I dial it way back when I leave my basement and play in a group.
@johnjcarter3187
Жыл бұрын
Don't you have natural reverb inside your basement? Lol
@Newnodrogbob
Жыл бұрын
@@johnjcarter3187 it’s a finished basement with a low drop ceiling full of those ceiling tiles like they have in schools. There’s like a vinyl flooring and wood paneling on the walls. So, short answer: not very much.
@JasonSadites
Жыл бұрын
Nothing wrong with layering it on thick at times, I do it too :-)
@steveandrushko75
6 ай бұрын
So are you saying that if I am sending my Helix to ny Marshall amp and cab that it might sound better to not add a cab to my pres-set I only had my helix for like 3 weeks and love any advice that you give to get the best tones out of my Heli
@JasonSadites
6 ай бұрын
Yeah, I would tend to avoid that. You are sending the sound of one cab into the other by doing that. On the other hand, if someone does it and lives the tone, they should carry on. But I would start by trying without the Helix cab in that scenario.
@steveandrushko75
6 ай бұрын
@@JasonSadites Thank you for the reply and your advise I will try it next pre-set that I build
@JasonSadites
6 ай бұрын
@steveandrushko75 my pleasure and hope it all works out!
@futureace73
Жыл бұрын
I may have missed it on the channel, but any opinion or interest in the Quad Cortex? How it compares to Helix for someone as well versed with Helix/modeler usage in general (such as yourself) would be valuable.
@adamwilcox6405
Жыл бұрын
You maybe correct but I think it's a mistake to assume effects are used to cover up bad playing. Some of us of a certain age (ahem) and our music taste was informed by alternative and post punk bands in the 80s like the textures the effects can bring. That doesn't mean they aren't being used incorrectly or not at their most effective way.
@JasonSadites
Жыл бұрын
I didn't assume that, I said that it is why some people might use effects incorrectly. I also said that if it is working the way you want and getting the results you want you should carry on doing just that.
@adamwilcox6405
Жыл бұрын
@@JasonSadites appologies my misunderstanding.
@_youreek_
Жыл бұрын
there is one more mistake. hands and skill that's not such like yours :)
Пікірлер: 41