This is the kind of videos I like from Titan..... much better than "how much we can blast away on a part" or "how fast we can we machine it "......... What a fine factory and training facility.🤗
@christophervillalpando5865
2 жыл бұрын
What an awesome tour! Look at the size of that Rotary Grinder! Boom!
@davecox8922
2 жыл бұрын
You ready to jump inside one of those bad boys?
@christophervillalpando5865
2 жыл бұрын
@@davecox8922 Lets Do IT!
@travisj.3994
2 жыл бұрын
"Every country should have a manufacturing foundation." Couldn't have said it better myself brother. I love seeing credit being given to the men and women that build this world; we need more of them.
@jorge227able1
2 жыл бұрын
Tell that to the countries that manufacture these.
@shiraz1736
2 жыл бұрын
You forgot “boom”.
@1008chaz
2 жыл бұрын
I wish the north american educational system supported vocational training like they do in the EU. The skilled trades gap is killing north america and it's like no one can see it.
@mikeblankenship7930
2 жыл бұрын
You're exactly right. I just retired as a machinist and we could see this coming 20 years ago.
@1008chaz
2 жыл бұрын
@@mikeblankenship7930 I'm a young machinist myself (in my 20s) and every company I've been to has an average employee age of 40-50 with many key people within 5 years of retirement. It's been really good for me personally because I've been lucky enough to have really talented people teach me some things but it also scares the hell out of me because I don't think a lot of these companies can survive all the people retiring
@tienphuongdang3794
2 жыл бұрын
Its not the EU, only Switzerland has the 4 Years apprenticeship.
@norbertfleck812
2 жыл бұрын
@@tienphuongdang3794 Germany, Austria Poland, Scandinavia and others have got a very similar apprenticeship education system like Switzerland.
@SarahKchannel
2 жыл бұрын
@@tienphuongdang3794 yep indeed switzerland is not EU, different educational system. A machinist or electrician that comes out of 4 years training in Switzerland is usually about at the level as higher level education even within the EU.
@JoshuaHolstein
2 жыл бұрын
This education system is normal in Europe It’s called : Ausbildung
@mariocorleone106
2 жыл бұрын
Something i learned a while back... "There's no such thing as perfection... Practice makes progress"
@marcoperuch
2 жыл бұрын
What an honor to have you here Titan! Welcome in my homecountry. How cool is that? Your mission to bring people into manufactiuring couldn't been bether explained then showing the apprenteceship department. There young people learn all the aspects practically - and sooner or later they work more and more on real projects/machines
@travisj.3994
2 жыл бұрын
I agree. Super cool to see the dedication to the next generation.
@ODGColornChrome
2 жыл бұрын
Awesome vid Titan! And well said about manufacturing!
@KevinJones-pj8kx
2 жыл бұрын
Hand scraping can be used to make things super flat but most of what you showed was to create oil retention grooves to properly lubricate the ways.
@vincentwhite7693
2 жыл бұрын
Well you absorbed a whole lot more information than me in that 5-second clip. But slowed down it look like there was blueing on those surfaces which if so means they were being scraped flat.
@kleini3
2 жыл бұрын
Right but not in that particular scene
@jonaskung4412
2 жыл бұрын
I work right next to "Hand scraper". And i can tell you that this wasnt for lubrication. It was scraped to be flat. He just startet with this section i think. First he has to get a basic patern down.
@GhulamHussainEngineeringWorks
2 жыл бұрын
Great working beautiful company grinding making b😄😄m
@chryzthd6654
2 жыл бұрын
Hi from Germany Awesome Video but I think it's a shame that not every country has a apprenticeship style of learning a job. in Germany, Switzerland etc. it is just normal and for most jobs in this industry. it's mandatory. Learning these things practically and theoretically is the best way to become a good machnist.
@TITANSofCNC
2 жыл бұрын
I am in Germany now 😁
@JD-hh9io
2 жыл бұрын
Greetings from New York, USA. Sadly companies here don't like to make things any more. Making thing require people. And people cost money. Companies do not want to pay you to take a 10 min break or go to the toilet. Take a vaction or holiday as some people say is not in the companies interest. On top of that the companie has to provide a welfare package for healthcare and such. All costs money and they would just as soon send the work to China and other far off lands. Hope you are all well out there and have a nice day.
@J0nny_
2 жыл бұрын
@@JD-hh9io I'm from Germany too and I was wondering why Germany has so few giant corporations. I am starting to think that this is actually a good thing, since it allows the Employees to actually be recognized as mandatory. A lot of smaller companies work a bit like families with stricter rules and the management often knows why they need their employees. But one must not forget that a lot of that is thanks to the German System, like Health insurance is mandatory and split 50/50 between company and employee, mandatory paid sick leave, 20 says/year of mandatory paid vacations, protection against dismissal and so on. I think this reduces the ability of a company to grow toxic significantly. The fact that Germany suffers under a major labor shortage is also a factor which keeps most companies at bay. But that also means that all the excuses of the companies like "it's too expensive" are hardly valid, the root of the problem is probably the unregulated, seemingly toxic workplace culture in many companies (as far as I can tell, haven't been in the USA yet)
@azeemhafiz3224
2 жыл бұрын
@@TITANSofCNC AOA Sir I wanted to contact you Can you tell me how? And it is important I really don't waste your time.
@Sebastian-ed5kt
2 жыл бұрын
@@TITANSofCNC where are you in Germany? I'm sure many machinist want to meet you here😂
@vijayradhakrishnan2043
2 жыл бұрын
Yes, Every country should do the same training program. Iam form India we don't have a program like that😔
@Topcoatdetail
2 жыл бұрын
We do have but only for ITI students, may be last semester
@Kardos55
2 жыл бұрын
Thank you for that fascinating tour Titan. It took me back in time and place to my youth to machine shops in Hungary and Germany.
@josesolis2545
2 жыл бұрын
Hey titan Gilroy . That pretty cool tour at this grinding facility. Why don't you take us at the Drake machine facility at warren,ohio. U.SA. they,re cnc gear ,thread grinding machines, made in the USA. I operate a cnc drake thread grinder, in Illinois. this machines are long lasting, rigid machines. Thanks for the tour.i really appreciated the time you took to show us this facility. Amazing
@DolezalPetr
2 жыл бұрын
I love Barry
@barrysetzer
2 жыл бұрын
😘😂
@shaniegust1225
2 жыл бұрын
Everyone loves Barry! BOOM!
@davecox8922
2 жыл бұрын
Get in line. I got dibs on him next.
@ColKorn1965
2 жыл бұрын
😮😮😮😮😮ooooooo!!!! Aaaaaaa!!!!
@mikawatzel3272
2 жыл бұрын
Hi Titan, welcome to Switzerland. Is there a possibility to meet you once a lifetime? I would recommend you(and its an absolut must) to visit Pilatus Aircraft Ltd in Stans. I did my apprenticeship there and I think Pilatus is the most interesting and successfull business to combine everything that the industry has to offer!
@thecosmicknowingknowing3099
2 жыл бұрын
Eye 👁️ LOVE you folk's
@bboydrummer1
2 жыл бұрын
Never heard of this machine before so thank you for this!
@marshallbrooks4982
2 жыл бұрын
I agree I am jealous I love this video once again your killing it.
@tdg911
2 жыл бұрын
Good stuff as always
@showkathossain1088
2 жыл бұрын
You are the boss. Thanks for video.
@mohammedalbattal77
2 жыл бұрын
Thank you for this awesome video man By the way, next time we won't accept the next vedio if you go on vacation without your staff 😂😂 If we don't see Mr Barry ... Trevor.. and Jessy we will be so mad 😂 Definitely we will go and protest in front of your company door 😂😂😂
@barrysetzer
2 жыл бұрын
Hahahaha TELL HIM Mohammed 😂
@mohammedalbattal77
2 жыл бұрын
@@barrysetzer I will make MR TITAN sign documents to the UN Council and pledge not to do it again 😂
@trevorgoforth8963
2 жыл бұрын
😂😂 I like your style Mohammed 👍🏻
@mohammedalbattal77
2 жыл бұрын
@@trevorgoforth8963 I am a good lawyer too 😂👍
@bobveld4705
2 жыл бұрын
25 years of grinding and seeing this video makes me as excited as a pair of big breast in my face.😛
@davecox8922
2 жыл бұрын
Well you can't argue with that visual picture. LMAO.
@trevorgoforth8963
2 жыл бұрын
Impressive machines, you can see they take a lot of pride in building them! Thanks for the tour boss!
@ChrisSmithCenterline
2 жыл бұрын
Great video especially the part where that kid is working as an apprentice. It underscores the absurd mistake we made when pulling industrial arts out of Junior High under the assumption that everyone would one day be a knowledge worker.
@travisj.3994
2 жыл бұрын
Absurd is right. We have always needed builders and disparaging their worth will bring nothing but regret.
@davecox8922
2 жыл бұрын
@@travisj.3994 100% spot on man.
@SwolePapi15
2 жыл бұрын
Its great to see. Here in Canada I was pressured in highschool to go to university to become an engineer rather than pursue my actual interest... machining. $20k+ wasted later after dropping out of university I am now a licenced tool and die maker and am much happier, kids should be encouraged to enter the trades.
@JSomerled
2 жыл бұрын
Nice tour..always cool to see what others are doing..
@langgangbang
2 жыл бұрын
Damn Titan...l just missed you by 6miles...
@nicholasmoninger271
2 жыл бұрын
Love ya Titian, Awesome video. We better get our skills together here in the USA. European shops are top notch. Not many places around me that bring in the youth and offer somthing like the company your at. Need more of that.
@thecosmicknowingknowing3099
2 жыл бұрын
Gratitude Universe..... Grand Rising Cosmic Star's One of My Tribe's Blending Skill with LOVE....The Cosmic CREATOR'S B.O.O.O.M. BOOM 💥💥💥 4 The Trinity family, Period Point Blank UNAPOLOGETIC Chicago is watching and Learning
@josealejandrorodriguez7974
2 жыл бұрын
your video are awesome i see you from cuba great job you are doing
@wingfixer3833
2 жыл бұрын
Before i became an Aircraft mechanic i was an ID and OD Precision Grinder on machines such as Norton, Cincinnatt Landis, as well as Surface grinders and Blanchards. I always wondered what the Future of Precision grinding would become. Because its a High Level Skill to make metal Concentric hitting round and straight within .0005 parts weighing up to 500 lbs or more.....well I Respect the Work and am Happy its become more Than I could Imagine.
@Pinkmilka
2 жыл бұрын
I love how he describes the german trainee program. Normaly you have 2 school days (Berufsschule) and 3 days of work, sometimes also on weekends. You are getting paid for the school days and working days in full (based on what industry up to 1200€ per month with pretty much no taxes). Germany is just awesome in this way. Bases on all the german factory tours Titan did i really think he wants the same for the US :D
@nyco7708
2 жыл бұрын
It’s in Switzerland. Welcome in the best country 🇨🇭🇨🇭
@supremecommander2398
2 жыл бұрын
it is great how Americans are usually fascinated by this system, but its a pity that over the last 20 years our society worked towards adopting the US system due to a stupid international study that claimed that German workers are less qualified, because they didn't go to university. and now, we face a crisis where we have a vast amount of students, and no professionals in manual labor jobs.
@lancelot0007
2 жыл бұрын
In Australia they have apprenticeships for 4yrs to but thanks to manufacturers going overseas to many China there is not to many industries offering apprenticeships now. Such a sad state were in now thanks to the Lima Agreement in the 70's.
@toranacar
2 жыл бұрын
True words, every country should have a manufacturing foundation. Here we are in Australia throwing it in the toilet!
@Kosmonooit
2 жыл бұрын
Looks like those students are doing some manual machining huh
@mackk123
2 жыл бұрын
Seeing the rails reminded me of the *BOSCH REXROTH GRANITE FACILITY* that you guys should also try to get a look at.
@berntinulkshredder
2 жыл бұрын
That is insane, that is awesome! 16 years into trade before full school then more into trade, what else do we need if not this process w you just showed us? Just maturing the skills , may be they bring tones of ideas now or later.
@whatsonh5737
2 жыл бұрын
Thats how it was in Poland back in the 70 and 80'. Only diffrence was, you had entire machine park in school. Many schools were buildind all kinds of machines (lathes, drills). You had few days of theory lessons and then you went into machine shop to actually use theory in practice (how to machine lathe spindle, how to scrape, grind, how to measure). People from this age are on another level. Now we have just tons of theory and useless subjects so later on after finishing school many students are just scared to even touch machine. Only few private schools are doing what Titan is showing us here.
@berntinulkshredder
2 жыл бұрын
@@whatsonh5737 sincerely I love the way it is. I have been on the search for a while for a way to bring the trade beauty into the moment. It is so sad when you see someone say he/she knows how to operate machine, but unfortunately they can't even as you said get close, so scared but they can challenge you in theory! I am going around seeking for machines to, and may be get to help this trade back home in Kenya, where there is less of the love of trade. I hate seeing the things I can do being imported or youths crying of jobs when I can may be help I'm a way. Thank you for your insight.
@williamofhler5613
2 жыл бұрын
Could spend weeks just walking around absorbing the atmosphere there !!
@ianleary9223
2 жыл бұрын
4:58 This guy is about to learn what runout is. Still younger than I was though.
@christiaanbianchinawiid309
2 жыл бұрын
I just love this video and myself being in the trade, it really amazes me how awesome education has become and how cool those machines work. Thanks for the amazing things you do😁💪💪
@jmowreader9555
2 жыл бұрын
First...why do I suspect there's going to be a Magerle unboxing video in the near future? And come on: You KNOW why there's no technical education in this country. It's not because "they think everyone is going to be a knowledge worker." I see three reasons. First is liability. It's not like it was back in the day. Lots of us learned to weld in high school. Today the schools can't afford the insurance. Second is high-stakes standardized testing - which was invented by the Republican Party as a way to shut down the public schools. If your school's continued existence is dependent on test scores you're going to teach to the test...and chamfering isn't on the test. The third is the higher education industry, especially the for-profits. If you were to set up a program today that would take a high school sophomore and turn him into an employable machinist by the time graduation came around, the higher education industry - who can afford congressmen - would blow a gasket. (And, of course, a properly trained machinist could put it back.) Plus, where would the schools get the money to do it? Our elementary school teachers are buying their own construction paper. "We need five million dollars to set up a CNC lab" will not set well with a school board that can barely afford to run the furnace. However, the football team seems to get whatever they need.
@norbertfleck812
2 жыл бұрын
You didn't understand. In Northern Europe the craftsmanship education is performed by the companies under the supervision of public trade schools and the industrial chamber of commerce who do the standardized testing. If you hire an apprentice for education, you cannot fire him/her before the end of his apprenticeship (or if he/she fails the tests). The apprenticeship starts at the age of 16 which is the age until which school is mandatory for everyone. School (elementary school as well as highschool/college or university) is generally free of charge, and an apprentice is paid for the work (approx 30% of an educated worker)
@xXDESTINYMBXx
Жыл бұрын
@@norbertfleck812 a couple things, university isn't free, it's inexpensive. You can absolutely fire an apprentice. Tough it is a lot harder to do so than a regular worker, for obvious reasons.
@NSResponder
2 жыл бұрын
Swiss precision has a long history. I wish I could have been there to see this facility myself.
@rajub9126
2 жыл бұрын
Plz make video on feeds and speeds calculations
@ProjectShopFl
2 жыл бұрын
Great video Titan, I like how you are always pushing education in the trades.
@DHundrethMonkee
2 жыл бұрын
Maui Boy makes good.
@tommytwotimes2838
2 жыл бұрын
Now next visit MIKROMAT in Dresden in Germany. Highest precision grinding and 5 axis CNCs on the world. Only a handful yearly sold because it's nearly all made in house. We have one machine with 6x3x1.5m and the precision is +/- 0,005 without any correction in Control like most cheap manufactures doing...
@joseguzman9448
2 жыл бұрын
Absolutely beautyfull;)-
@manishrao2707
Жыл бұрын
Thanks for recording this video....!!!! Mechanical Engineer as a profession, Love manufacturing...and improving my machining skills from Titan's resources.
@NiiAyertei
2 ай бұрын
If it is "top secret"... How can you then be there announcing to the hole world? ☝🏾😌😉 AWESOME 😅
@ELECTRICMOTOCROSSMACHINE
2 жыл бұрын
Enthusiasm plus perfection= MAGIC.
@royhellmann9018
2 жыл бұрын
Soooo... Soooo true what u said... love the documentary... keep it up 👍 excellent work!!!
@everythingquads
2 жыл бұрын
That is my standard of working. I put everything into my job and always save my employer money, but I'm still low paid. Financial rewards seem a long way of.
@Stasiek_Zabojca
2 жыл бұрын
Would love to see Kern shop tour!
@Wade-1
Жыл бұрын
Cookie cutter. Not cookie box. Love seeing machines make other machines.
@russelljohnson6243
Жыл бұрын
What you are doing is a dream. America can reclaim the mastery of manufacturing again, thank you.
@williamswallers1709
2 жыл бұрын
Scraping is to allow oil to flow between surfaces….as well before cnc there were tracers that made these part you say only they can produce.
@johnmesamore5263
2 жыл бұрын
Thanks buddy you are truly making a difference.
@Iwished4
2 жыл бұрын
I wanna hear this guy order a pizza ... Please do a pizza ordering video lol
@toddlfrank
2 жыл бұрын
Cool tour
@mohammedalbattal77
2 жыл бұрын
Ohhh Maaaaaan you should absolutely to make a new series about CNC machines factory honestly ..... I LOVE IT BOOM BOOM BOOM 💥
@SarahKchannel
2 жыл бұрын
One of the reasons for quality difference is the retention of employees in Switzerland. In many cases a apprentice will stay-on after 4 years, in some cases up to their retirement. Switzerland has a very different employment philosophy than north America. There is no 'hire and fire', an employer as-well as employee has usually about 3 month notice, to either quit or get rid of a person. The result is a totally different climate, as both sides tend to put more effort into the job environment. If you can fire at will, your products need to have a more stable life cycle, as you cant up-down scale on short notice.The disadvantage has always been, that european economies recover/rebound much slower to economical changes, but tend to be more stable on the long run - which reflects in quality and knowledge retention. I guess that explains why silicon valley is not in Switzerland, beside the intellect being present - the ecosystem is just different on either side.
@brianw572
2 жыл бұрын
Thanks for great Vlog Titan. They definitely have it right over there with getting kids involved at a younger age to learn a trade starting at age 16. Saw this when I was over in Switzerland for training in 2014. The U.S. needs to adapt this thinking. Why have kids in school for four years of high school learning things that are not really worth it. I can see two years and then at 16 get them out into the trades learning something useful.
@NSResponder
2 жыл бұрын
We had it, and it went away in the 1970s. The USA used to lead the world in machine tools.
@xXDESTINYMBXx
Жыл бұрын
It's just a possibility for a career path. You can also go to baccalaureate school and then to university. Or you do a apprenticeship, work a few years and then go to an adult baccalaureate school and then go to uni. Quite the diversity of choice we have. Also uni isn't very expensive.
@designersworldcbe3708
2 жыл бұрын
Hi Titan of CNC if you share the how this Machine column have been manufactured in casting will be more informative for mechanical engineers and professionals in Manufacturing. Thanks in advance
@219jello
2 жыл бұрын
Pretty cool plant. I worked in a machine tool rebuild shop. We did mostly micro-centric grinders for the bearing industry but also many other types of grinders and metal cutting machine. Reworked all the slides and made new gibs and even used Turcite on the ways. Very cool industry
@faebu8601
2 жыл бұрын
Great video and nice to see a automation system of the company i work at in the end
@savageone9568
2 жыл бұрын
I just had a question? What will happen if Biden bans milling machines or tools for the machines what would you do. I've wanted to get into this profession for a while but now I'm wondering.
@dubianerreviews5381
Жыл бұрын
WHat if he bans water? 😱
@AlexLancashirePersonalView
2 жыл бұрын
I had a similar training at Lucas Aerospace in the late 1960s. I was in charge of the grinding shop in the last year of my apprenticeship.
@nicholasauth1612
Жыл бұрын
Man!!!So dope!! I work for a swiss company and the amount of precision that goes on in like you say on another level. I love the dedication they have to the youth and trades and I’m glad to hear that you are bringing that to the US. The world needs more TITANS!!
@johnhoe3166
2 ай бұрын
im proud to work there. cheers to yall!
@upendaglover2559
2 жыл бұрын
💗❤💗
@g-zen9790
2 жыл бұрын
I MISS this trade so badly. Haven't been arond a macgine since 2009. Hey Titan you should come open a shop in Jamaica 🇯🇲.
@rickdee1983
2 жыл бұрын
Thanks for the tour. I recognized the UGT symbol on the building, 6:07 best statement ever! Need to bring back all the trades!
@kaeptenxy3569
2 жыл бұрын
would love to see you check out Hermle they make amazing 5 axis CNCs, we have quite a few of them at work. I am actually also an apprentice at the moment. love your content.
@crazycooterMN
2 жыл бұрын
It's a shame that shop classes have been voted out in favor of social studies. I'm so glad I got to take metals, small gas engine, woodworking, etc. I really think that's what's missing, that company has a great program, good to see!
@opendstudio7141
2 жыл бұрын
I recently became aware of wheat & grain processing and the various large milling and processing machines used for everyday food and feed products. Precision maintenance is required and the highly specialized machines and service processes are unlike anything you have ever seen. It's just not a sector of the machinist trade that receives much or any attention.
@tubbytimmy8287
2 жыл бұрын
How can hand scraping be more precise than a machine?
@brandons9138
2 жыл бұрын
Hand scraping allows for just hitting the spots that need to be taken down, no more, no less.
@abdullahalmahin9070
2 жыл бұрын
Hello guys..is it possible to do concrete machining..do you have any video on it
@dennisginser9746
2 жыл бұрын
Wish I worked for Titan.
@jonaspereira3551
2 жыл бұрын
As vezes viver no Brasil é desanimador. Porém, somente nós, fazedores persistentes, podemos mudar o mundo.
@amadine770
2 жыл бұрын
Thank you for letting us in to the great doings of this phenomenal company.
@danielquatrone4654
2 жыл бұрын
We used to build machine tools here for real. (we have haas!) But we had a legacy of heavy machine tool production All destroyed by Wall st and lawyers. The remaining are shadows of former glory. Bullard Van Norman Heald Blanchard Jones & Lamson Bryant Gould & Eberhardt Gisholt Fosdick Fellows Lodge and Shipley Monarch Leblond South bend Mattison Thompson American Tool Works Axelson Springfield Grand Rapids Brown And Sharpe K&T CINCINNATI Boyer Schultz Rockford Feel free to add
@norbertfleck812
2 жыл бұрын
Haas is not a machine, but a serious sickness.
@joshuaorange8290
2 жыл бұрын
Why is their logo the same as Walter? Same parent company?
@dubianerreviews5381
Жыл бұрын
United Grinding Group, correct.
@robertwatsonbath
2 жыл бұрын
I like that the apprentices are learning manual skills, on Fehlmann mills too.
@russellalldredge9758
2 жыл бұрын
I love the work you are doing. It will definitely help me out.
@DolezalPetr
2 жыл бұрын
First
@valentijnraw
2 жыл бұрын
glad to see grinding gets so much attention lately. its my trade and i love it.
@hulkmutant_hd5788
2 жыл бұрын
funny is in the facility i work build machines for siemens they think were a company over 300 head were 9 guys xD
@hulkmutant_hd5788
2 жыл бұрын
not only for siemens also reihnmetall etc .
@timjohnson8725
Жыл бұрын
What about the wheels??
@dot73
2 жыл бұрын
Beautiful
@joshgray1331
2 жыл бұрын
amazing!!
@miltononyango
Жыл бұрын
amazing
@hman8753
2 жыл бұрын
BOOM
@brodieduncan7885
2 жыл бұрын
boom
@upendaglover2559
2 жыл бұрын
❤💗❤💗❤
@mahi4451
2 жыл бұрын
Sir have a job I am CNC milling operator sir pls give me a chance pls🙇 sir
@gaborkis5889
2 жыл бұрын
That 90% of all (aircraft) engines are made on Magerle machines, is bullshit. Rolls Royce and General Electric companies using a lot of #Makino grinding machines, maybe more than Magerle.
@jtg2737
2 жыл бұрын
While the kids here are fiddling with their cellphones and waiting for the latest version of a cellphone, this county is training them with on hands training! WHAT a shame where we are at in the United States! Depressing.
@mrechbreger
2 жыл бұрын
Not impressed by the electrical Siemens parts. I'd rather go for linuxcnc put in some resources and get it on speed modify and add customized code to it. I'm getting amazing results with LinuxCNC and customized the menu for parts which I need myself; The accuracy is amazing.
@norbertfleck812
2 жыл бұрын
The Siemens CNC controls HMI is based on Linux, while the Servo drives work on a real time embedded programming. Siemens and Heidenhain CNC controls are the most accurate and dynamic drives available worldwide. LinuxCNC is dimensions off industry standards.
@mrechbreger
2 жыл бұрын
@@norbertfleck812 LinuxCNC provides a good foundation for getting things done in a very reasonable way and it's future proof. There are certainly some things that have to be improved eg. G71/G70 in lathe mode the lead in speed is fixed which is not suitable for stainless. However with a little bit programming experience they're no show stopper. I very well believe that the other controllers are good and mature, but looking forward the next 10 years I'd rather go with LinuxCNC. I'm using it for around 2 years now and I've done exceptional things with it which I never thought I could do myself before. However when using LinuxCNC I also recommend programming skills to fix and/or debug certain issues - to understand what's going on but that also makes it future proof. My entire workshop is off industry standard and yet still good enough to make parts within tolerances which I need (measured 0.05mm) - and which commercially would cost a 5 digit amount for the volume I need. Most shops also charge extra if you need an accuracy
Пікірлер: 159