Hi, to help you confirm the function compatibility, plz send us the model, year and VIN of the Toyota, thanks!
@caymanlocksmithandsafespec2185
Жыл бұрын
@@TopdonOfficial toyota rav4 2012 toyota camry 2017
@TopdonOfficial
Жыл бұрын
Hello, what phoenix scanner tool do you use? toyota rav4 2012 toyota camry 2017 all key lost don't require T-ninja Box. Plz enter Toyota on your diagnostic scanner > Immobilizer system > Special function > All keys missing to operate.
@viridian6903
2 ай бұрын
Does the tool support latest denso ecm cloning
@TopdonOfficial
2 ай бұрын
Hello, to confirm whether this ECU is supported, can you provide a detailed vehicle model, year, and VIN for us to check the coverage list? Please feel free to email support@topdon.com if you have any questions. We're always happy to help.
@viridian6903
2 ай бұрын
@@TopdonOfficial just i want to know i if tool support denso ecm
@user-qk2js8eq1i
7 ай бұрын
Hi, I'm new one in topdon world... I plan to buy a topdon phoenix lite mainly for diagnostic and programming the keys car...Is really important now to take also a ninja box?
@TopdonOfficial
7 ай бұрын
Hi, if you are looking for a device that supports diagnostic and key programming funcitons, please consider Ultradiag, it comes with 2-year diagnostic and IMMO software, with 13 ecu special functions. The T-ninja Box is a immo programming tool that supports BWM/Benz/Audi/VW key programming, immo module replacement, ecu clone.... It's compatible with Phoenix series scanners.
@ibrahimwaheed987
9 ай бұрын
Will this clone Renault DC4 TCM module with toodon phoenix plus
@TopdonOfficial
9 ай бұрын
Hello, plz provide the vehicle year, and confirm whether there is type c port on your Phoenix Plus VCI dongle. You can reach out to us on facebook messenger to send this information, our engineer will confirm the function compatibility for you promptly.
@Peter-hc4di
9 ай бұрын
Hi, when in immo and test keys you do you need to be connected to a car?
@TopdonOfficial
9 ай бұрын
Hello Peter, do you mean to detect the key cip with T-ninja Box? if yes, this function is not supported.
@Peter-hc4di
9 ай бұрын
@@TopdonOfficial Yes, i belive the key test function where in the immo prog section before...(before i got mine) I would like to have possibility to test key on bench, atleast i cant find it! Thank you for your time!
@TopdonOfficial
9 ай бұрын
@@Peter-hc4di The T-ninja Box doesn't support key chip or type testing. It can generate dealer keys for BMW, Benz, Audi, VW. Please insert a blank key as instructed for this function. For any queries, email us at support@topdon.com. Have a great day!
@OonYoutube
3 ай бұрын
How do we get instruction on how to program key replacement, or all keys lost on Mercedes with this unit. I can't find anything. Customer service is no help. They told me to search for that information in the forum. I hope that I didn't waste my money on this setup. I have the Phoenix Plus, T Ninja Box, and MCU3. What am I doing wrong here?
@stevehayes6661
Жыл бұрын
Will the T-Ninja box work with Topdon Artipad 1 ?
@TopdonOfficial
Жыл бұрын
Hello, Artipad I supports to work with T-ninja Box to perform ecu replacment, eeprom and flash data read and writing, BBA models key programming.
@shakes6428
Жыл бұрын
Can you demo a few GM global A ECU’s?
@TopdonOfficial
Жыл бұрын
Cloning a Global A GM ECM Module with the TOPDON T-Ninja Box: kzitem.info/news/bejne/qq53n55qcV-VY6w
@flocoincoin605
25 күн бұрын
Where buy ? please
@TopdonOfficial
24 күн бұрын
May I ask which country you are in? I'll help recommend the best purchasing channels for you.
@truthhurts2149
8 ай бұрын
How does it compare to autel im508 with xp400?
@TopdonOfficial
8 ай бұрын
Hello, the T-ninja Box is a specialized IMMO hardware designed to be used in conjunction with the Phoenix series diagnostic scanner. It's capable of key programming, IMMO module replacement, ECU cloning, and reading/writing EEPROM and flash data for BMW, Benz, Audi, VW, and Porsche vehicles.
@Beowulf002
2 ай бұрын
@@TopdonOfficialdoes it require a phoenix diag tablet or can it be used independently to perform these functions.
@jorgemat8080
11 ай бұрын
Hello, i tried using t-ninja box to calculate a mercedes w207 key password on bench and theres no menu what so ever to get the job done. Spent 1 hour clicking menus and nothing. Does that mean no bench coverage for eis? Can't get password Can't add key, and when connected directly and try to use obd2 connected directly to eis it says cant communicate with ecu, im not trying to communicate with ecu, im tryingbto communicate with eis w207. Any suggestions? Thank you.
@TopdonOfficial
11 ай бұрын
Hello, to assist you with your feedback, could you please gather some videos demonstrating the operation procedures of your device and upload the log of IMMO Prog for our engineers to analyze? If you have collected this information, please share it with us at support@topdon.com.
@jorgemat8080
11 ай бұрын
@TopdonOfficial thank you for the reply. I'll make a video and send it in.
@Peter-hc4di
9 ай бұрын
Guess you already sort it out but eis clone etc for MB is in the diagnostic section....
@Peter-hc4di
9 ай бұрын
I think you also need MCU3
@jorgemat8080
9 ай бұрын
@@Peter-hc4di thanks but the mcu3 is for dme/ecm and not esl/eis. But yes I figured it out, thanks. I'm used to using aute,l and topdons menus take a bit to get used to.
@LuisGonzalez-sj5lh
10 ай бұрын
can you program for Volvo?
@TopdonOfficial
10 ай бұрын
Hi, T-ninja Box doesn't support Volvo ECU programming, suppots some volvo's engine and gearbox clone. Plz visit our website: www.topdon.com/pages/support-diagnostic-tool, select key programming>T-ninja Box to check the coverage list.
@lvskproject2523
10 ай бұрын
I am Having a problem with my T-ninja box and Phoenix smart. It have all ben working fine until yesterday for cloning ecu´s and key programming. But now every time I go into "Immo" and "Immo Prog" it says "network connection failed, Please check the network connection". The network connection is good and I have also tryed other WiFi connection and same problem. I have also tryed restoring the phoenix smart to factory. Updating VCI firmware. Nothing helps. Any ideas anyone? :)
@TopdonOfficial
10 ай бұрын
Hello friend, Regarding your T-ninja Box issue, could you please private message us on Facebook Messenger and share your device's serial number with our engineer? We will check it from the backend as soon as possible. facebook.com/TopdonOfficial/
@TopdonOfficial
10 ай бұрын
Hi, we have addressed your issue; please try again. The engineer mentioned it was due to exceeding the limit on attempts.
@lvskproject2523
10 ай бұрын
It works now. Thank you for fast response :) @@TopdonOfficial
@truthhurts2149
8 ай бұрын
Wait you have to be connected to Internet to do key programming? If so big fail by topdon.
@ThiqRiq
10 ай бұрын
Does this work with the UltraDiag?
@TopdonOfficial
10 ай бұрын
Hi, T-ninja Box is in compatible with UltraDiag. If you want to do key programming, UltraDiag supports to subscribe IMMO software with an additional fee.
@truthhurts2149
8 ай бұрын
How much for the fee?
@djmobileauto
Жыл бұрын
I noticed you said European a few times. What about Asian manufacturers? How strong are this tool or just a few?
@TopdonOfficial
Жыл бұрын
Hello, with T-ninja Box, you get the most Comprehensive Vehicle Models Database of US, Euro, and Asian brands, such as Volkswagen, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota, and others. This immo programming tool is compatible with the most prominent ECU, MCU, and EEPROM Manufacturers. Its coverage includes Atmel, ST, MicroChip, Renesas R32C, NEC, and much more. Also it supports Benz, BMW, Audi key programming including all key lost.
@truthhurts2149
8 ай бұрын
Internet connection required? Big Fail
@TopdonOfficial
8 ай бұрын
Hi, Thank you for leaving a comment here. Please be aware that when using Phoenix series scanners with T-ninja Box, you'll need to download the wiring diagram and immobilizer data from the online server, which requires an internet connection.
Пікірлер: 47