Exactly the video I needed at this moment. Thanks!
@nancysullivan2815
2 жыл бұрын
Thank you very much quick and to the point - I can do this on my own now!!!
@ScottStruzik
Жыл бұрын
Thank you. It's amazing some of the details the manual leaves out, like the socket size you need to remove the plug.
@DonaldMang
3 ай бұрын
Thanks for the video, just what I needed!
@Humpflicks
4 жыл бұрын
Thanks for taking the time for this. I have a Power Max 724 OE. Saw somewhere you take the wheel off the oil spout side so it leans. Good idea until it's a couple of years old, you don't have a wheel puller and the wheel is stuck on the axle. Love this machine.
@kylebland9377
3 жыл бұрын
You should put anti seize on the drive axle every year. No issues taking the wheels off.
@keemosabe1826
3 жыл бұрын
I'd tilt the machine and put a 2x4 under the lift side. Seems a liddl; easier.
@hahahahah8396
4 жыл бұрын
Thank you! I got the 824 oe. Love toro! Got to do oil change next year
@thetoolsman49
4 жыл бұрын
The oil change is pretty easy. Good luck
@hahahahah8396
4 жыл бұрын
Love all your videos!
@thetoolsman49
4 жыл бұрын
You are to kind. Thank you!
@Stormin_Norman
4 жыл бұрын
Thanks for the video. I usually put a cement block under the left wheel to tilt it over some... I have the 1028 and will be using it tomorrow during this storm in southern N. H.
@thetoolsman49
4 жыл бұрын
Great snow blower. Great idea with the block. I hope you are ready for the snow
@Stormin_Norman
4 жыл бұрын
@@thetoolsman49 Yep, I was ready and my Toro worked beautifully, still snowing now as I type.... Tomorrow is another day...
@salinsarin1
Жыл бұрын
Nice vdo with good details
@MoLewis57
2 жыл бұрын
Thanks. I just got a Toro Power Max, and when I saw the oil discharge spot was right over the wheel, I was sure of the best was to handle it. The milk jug is a good idea, though when the time come for an oil change ( I have only run the blower once so far ) I hop can can jury-rig some some way to capture all the oil without having to be bent over or crouched down the entire time. However, it is good to know the milk jug fits.
@robertknight4672
9 ай бұрын
I've always been baffled why Toro puts the drain tube on the side. Even with the old Tecumseh Engines they did that and that engine could be ordered with it coming out the back as every other snowblower manufacturer did at the time. I think the only one Turtle has with the tube sticking out the back is the single stage model with the personal pace system as the engine is actually turned on its side.
@ccholgui
3 жыл бұрын
Good job explaining, very helpful 👌
@groot7776
3 жыл бұрын
Good video thanks I am about to go change the oil on my
@thetoolsman49
3 жыл бұрын
Super easy
@andrewlucas1595
2 жыл бұрын
1:11...you dripped.
@andrewlucas1595
2 жыл бұрын
Ha ha, sorry guy, great video....I just had to be that a-whole!!
@thetoolsman49
2 жыл бұрын
My feelings are not hurt. Lol. You are spitting facts
@TheRichfielder
2 жыл бұрын
Great video, very informative
@toastonryeYT
3 жыл бұрын
Time stamps 1:10 and 1:16, good stuff
@sade281
2 жыл бұрын
Hey I never use the cord I start wit the power button!! I keep the cord jus in case I lose power !! But deft helpfully vid thx
@JohnathonORielly
3 ай бұрын
What is the plug next to the oil plug? On mine, it's a gray cap
@stevegoulding574
Жыл бұрын
I have a Toro Powermax 828. How do I go about draining the gas tank on this model?
@redflamered
4 жыл бұрын
Thank you
@TornadoCrewStormChasers
3 жыл бұрын
Small engine oil has zink
@johnsmith-iq6lz
2 жыл бұрын
Why would they give you a extended warranty for a kit
@mccglastron1972
11 ай бұрын
At 1:10 you dripped a drop... At 1:16 you say you haven't dripped one drop yet, lol.
@keemosabe1826
3 жыл бұрын
4 cycle, Yea, but what about a Toro 2 cycle single stage. Seems to be no crankcase drain.
@toddbollen1455
2 жыл бұрын
2 stocks The oil is mixed in with gass...NO NEED to change..But need get te moxture right..
@TheRicardo414
3 жыл бұрын
hey been looking up videos because we just had our first snow and my snowblower stopped working. I'm gonna give her an oil change and a new spark plug but I was concerned when I took the spark plug off inside the hole was what looked like a bunch of black junk build up. is everything gonna be okay when I change the spark plug and oil or am I gonna have to learn some snowblower heart surgery and dismantle the engine and carb for a deep cleaning?
@thetoolsman49
3 жыл бұрын
I hope so. I would just try it.
@candicemorrison6101
11 ай бұрын
When if your snowblower don't runna
@jeffreyoldani5794
2 жыл бұрын
Some bullshit placing the outlet over the tire. Powder coat on their recent hardware is a joke as well.
@myohmy111
2 жыл бұрын
"I haven't dripped one drop yet"; Oh contraire young man! View your footage at approx. 1 min. & 8 sec. in. LOL
Пікірлер: 40