Yes the gentleman is right you have to torque them to 60 foot pounds of torque
@SinnerSince1962
3 жыл бұрын
If you remove the blades before cleaning out the deck, it's a whole lot easier. Cleaning the deck with the blades on, means you have to fight them while digging out the grass.
@philm893
3 жыл бұрын
I personally like using a bench grinder
@cheaperthandirtvideos1
3 жыл бұрын
Agree, I use a bench grinder too. I used this hand tool just to show how easy to sharpen blades with basic tools.
@markiverson6004
3 жыл бұрын
Thank you! Very helpful video.
@dewanehill1232
3 жыл бұрын
i would recommend disconnecting the spark plug if you want to keep both hands and all your fingers.
@Tundra_Guy
3 жыл бұрын
Yes, always.
@rdleahey
Жыл бұрын
No, I will not use a grinder on my tempered steel blades. The heat destroys the temper. I don't quite understand how the impact wrench removes the bolt without using a blade lock.
@philm893
3 жыл бұрын
What about balancing the blade I always do that
@cheaperthandirtvideos1
2 жыл бұрын
I've never had a balancing issue. I inspect the blades to make sure they are free from cracks or major dings and make sure when sharpening the blades that they look very similar in wear.
@wdaub
3 жыл бұрын
I always disconnect the sparkplug before doing anything.
@cheaperthandirtvideos1
3 жыл бұрын
Good safety procedure. I should do that on the videos.
@paultanner2007
5 жыл бұрын
Great video. Thank you for sharing.
@marcprovencher1457
3 жыл бұрын
I just bought one of these and noticed you sleeved your cables so they don't get pinched when tilting the push handle. Just curious on what size sleeve you used. Enjoy your videos!!!!
@cheaperthandirtvideos1
3 жыл бұрын
The older Timemasters from about 3years ago had those sleeves. Now they don't come with those. I should find some and put them on to protect the cables from snags.
@marcprovencher1457
3 жыл бұрын
@@cheaperthandirtvideos1 thnx for getting back to me. You look almost exact and even sound like someone i know here in NH.
@marcprovencher1457
3 жыл бұрын
Do you have a twin brother in NH ?
@roynaraine5580
4 жыл бұрын
I am having problems finding OEM fuel filter for my Toro timemaster. The ones I found said it works with fuel pump. The question I have is, does the Timemaster have a fuel pump or is the fuel gravity fed?
@michaelliberty6517
2 жыл бұрын
Gravity fed
@clairemaradan1210
3 жыл бұрын
merci !
@TheLawnFellas
4 жыл бұрын
What’s the foot pound for those blades and that impact gun what volt is it
@lionlegacy6652
5 жыл бұрын
They have to be torked to 60 foot pounds. That's what the manual says. 😳
@Bouba07
5 жыл бұрын
Make sure your blades are balanced before reinstall...
@SinnerSince1962
3 жыл бұрын
And how do you do that??
@Bouba07
3 жыл бұрын
@@SinnerSince1962 with a lawn mower blade balancer lol
@paultanner2007
5 жыл бұрын
Just subscribed.
@ryanstratton5895
12 күн бұрын
This is a video about cleaning the deck and removing the blades not really about actually sharpening them
@TheLawnFellas
4 жыл бұрын
What size impact gun is that??
@TheRusso123
5 жыл бұрын
NO NO YOU ARE USINGTHE WRONG DISC TO SHARP THE BLADES
Пікірлер: 32