Great video guy’s! Very cool test! Would be cool to see the pre and post charge air temps with just a shop fan blowing on the front. Would also be cool to see boost right before and right after the intercooler! But awesome video guys keep up the good work!!!! Is the surprise a little wif of spray 🤔🤔🤔 lol 🤟🤟🤟
@gapfactorygaragellc
Жыл бұрын
We will find out the surprise on Tuesday. If anyone coming to street car takeover this weekend then they will see it now lol
@HyLifeSociety
Ай бұрын
I have a boost issue right now, I think the bov is opening during boost and was thinking of measuring the pressure pre and post intercooler. I don't see any signs of belt slippage but that could still be the issue as well. So frustrating.
@TheOhsemix
Ай бұрын
Yeah on my last turbo setup I had a 6psi wastegate pressure non intercooled. With a cheap eBay cooler it dropped to 1psi and after multiple boost leak tests I realize it was the cooler.
@franknorman7268
7 ай бұрын
Awesome video
@trhall75
Жыл бұрын
Great video ! I was always one who thought it wouldn’t matter what inner cooler you put in.
@gapfactorygaragellc
Жыл бұрын
I think we may do the same test between the treadstone and the frozen boost one on the s2k to see if it makes the same power with both. Turbos are easy to crank the boost on.
@trhall75
Жыл бұрын
Some body must be getting the bigger torque storm blower! 😂😂😂
@musclecity06
Жыл бұрын
treadstone is the real winner in my opinion, especially since its at least $300 cheaper
@gapfactorygaragellc
Жыл бұрын
It’s definitely still a pretty good intercooler!
@slowg8701
Жыл бұрын
Yall going with the big 91r unit next? Hopefully! Can't wait to see if that's it! Is that the treadstone intercooler the mr bling kit came with? I'm saving up for that kit.
@gapfactorygaragellc
Жыл бұрын
It’s a 5” treadstone and I think the Mr bling kit comes with a 3” but we ran the 3” for two years before switching to this one! We didn’t get to test the 3” bc we no longer have it but I’d imagine it’d be close to the same results as the 5”
@slowg8701
Жыл бұрын
Thanks
@JH11JH
10 ай бұрын
@@gapfactorygaragellc was the 3" treadstone on the car when you saw the bov seep open? thank you!
@gapfactorygaragellc
10 ай бұрын
@JH11JH yes but we also changed some other things around. We did not have a dedicated vac line for the bov. And that may have also helped
@JH11JH
10 ай бұрын
@@gapfactorygaragellc right on, thank you for the info! Which video shows the bov seeping open? I'd like to check that one out
@terrionocoley9325
3 ай бұрын
Is there a number I can call you guys to do some work..... Well to be honest actually to install Torque Storm Since you guys have so much experience with it
@gapfactorygaragellc
2 ай бұрын
We really just work on our own cars. As of right now we don’t actually do customer cars bc our full time jobs don’t allow us a whole lot of time to.
@hydrocarbon82
Жыл бұрын
Were you running the same timing between all 3? One big prob, esp on ethanol, is tuners get scared of IAT's hotter than tap water, when really you only need to worry when it can fry an egg. 180F at 190kPa flows the same oxygen into the engine as 110F at 170kPa, so a dirt-cheap core with less restriction (and poor cooling) might actually do even better.
@gapfactorygaragellc
Жыл бұрын
Only thing changed was intercooler
@gapfactorygaragellc
Жыл бұрын
Also this was more about measuring restrictions. We did run no intercooler at one time but intake temps were so high that even having more boost still dropped power.
@probation2propagation420
8 ай бұрын
Link for the no corners cut intercooler?
@rotaryfreak4u
4 ай бұрын
Sweet good bye “eBay” cheap intercooler for me. 😅😂
@TheOhsemix
Ай бұрын
Lol on my Datsun it went from wastegate pressure of 6psi with no intercooler. And when I installed an ebay cooler it could barely build 1psi. I ended up having to get a boost controller to see more boost. With my 300zx I went ahead with a Kraftworks cooler but it’s too small now I need a bigger core for 600hp.
@slowg8701
Жыл бұрын
I've probably asked before but what fuel pump are you guys running and injectors?
@gapfactorygaragellc
Жыл бұрын
A dw 350 and a walbro 400 for fuel pumps. Injectors are 1650
@terrionocoley9325
3 ай бұрын
Where are you guys located?
@gapfactorygaragellc
3 ай бұрын
We’re in northern Indiana
@ttlpackage69
Жыл бұрын
Which model of each manufacturer was used for comparison?
@gapfactorygaragellc
Жыл бұрын
No Corners Cut Fab, Treadstone, and the cheapest one was the Frostbite one we got from Summit.
@ttlpackage69
Жыл бұрын
Right, I got that from the video. I know that there are different variants of each make. Treadstone has the TR11/TR1235/TR1245 models, Holley Frostbite has the FB609/FB603. Just wondering if these are equal comparisons between the brands. They all have different CFM flow rates and HP ratings. I'm looking at the Treadstone for mine, just wondering which you chose to test. Great video.
@DannyR2681
9 ай бұрын
@@gapfactorygaragellcwhich model is the treadstone intercooler?
@gapfactorygaragellc
9 ай бұрын
I am not honestly sure what model it is. I know it’s 5 in thick 3in in and out off the top of my head
@meangreen8812
Жыл бұрын
Are you running E85?
@gapfactorygaragellc
Жыл бұрын
Yes it’s on pump e
@probation2propagation420
7 ай бұрын
All air to air intercoolers?
@gapfactorygaragellc
7 ай бұрын
Yes they are
@koran202
Жыл бұрын
Twin torquestorm
@gapfactorygaragellc
Жыл бұрын
Lol we wish but there’s not much room for that in the engine bay
@Saintjamesfinest
Жыл бұрын
do you still have the truck?
@gapfactorygaragellc
Жыл бұрын
Yes the truck is still around. It’s in the chassis shop still.
@Saintjamesfinest
Жыл бұрын
@@gapfactorygaragellc ready to see it back out!
@gapfactorygaragellc
Жыл бұрын
It will be a little bit yet. The s2k is to make up for that being down
Пікірлер: 45