#steel #torque #girder #civilengineering #nut #construction
To calculate the torque value for a bolt, you need to consider the following factors:
1. Bolt diameter (d)
2. Thread pitch (p)
3. Coefficient of friction (μ)
4. Nut factor (k)
5. Desired preload (Fp)
6. Bolt material strength (S)
Here's a step-by-step process to calculate the torque value:
1. Determine the desired preload (Fp) based on the application requirements.
2. Calculate the nut factor (k) using the following formula:
k = (d / 2) × (p / π)
1. Calculate the coefficient of friction (μ) using the following formula:
μ = (tan(θ)) / (1 + (tan(θ)²))
where θ is the thread angle (typically 30° for most bolts)
1. Calculate the torque value (T) using the following formula:
T = (Fp × k × μ × d) / (S × 1000)
where:
- T = Torque value (Nm or ft-lb)
- Fp = Desired preload (N or lb)
- k = Nut factor
- μ = Coefficient of friction
- d = Bolt diameter (mm or in)
- S = Bolt material strength (MPa or psi)
Note: This calculation is a simplified approach and may vary depending on the specific application and bolt type. Consult the manufacturer's recommendations or industry standards for more accurate calculations.
Remember to always use the appropriate units (SI or Imperial) consistently throughout the calculation.
Негізгі бет Torque kaise hota h site pe (how to do torquing on bolt 🔩 in steel Girder's
No video
Пікірлер: 6