That is tuff but, I ain't never gonna let you borrow my knife again.
@XRING
5 жыл бұрын
Shootin' with Uncle Dan LOL! I wouldn’t treat my knife like that either!!
@mikeyob4271
3 жыл бұрын
What kind of boots do you have ? Thanks. Best regards.
@DV77737
3 жыл бұрын
Hahaaaaaaaa
@sjsurfer1
2 жыл бұрын
@@mikeyob4271 They look like Keen boots
@mikeyob4271
2 жыл бұрын
@@sjsurfer1 Thank you friend,
@edinpandzic5838
2 жыл бұрын
2:54 I was like "NO WAAAAY, HE ABOUT TO STAB THE CRAP OUTA SOMEONE'S TRUCK!"
@TifBannen
3 жыл бұрын
Universe rendered completely deaf by microtech lovers' collective screams.
@steelpunisher6944
5 жыл бұрын
Man!! That was painful to watch. lol. But.... that is true testament how well they are built and why the cost more. Good stuff my friend. Even tho I have to take blood pressure meds now.
@duckuy
5 жыл бұрын
I cried a little the first time he thrown it.
@prod.deathwish
4 жыл бұрын
Made me cringe lol
@benclark8495
4 жыл бұрын
Yes aluminum isn't very ding friendly
@spammcgee9893
3 жыл бұрын
Threw
@Sloomdayer
3 жыл бұрын
Threw
@duckuy
3 жыл бұрын
True
@Errcyco
2 жыл бұрын
That is seriously one of the coolest Ultratech I have ever seen. They never have compromised on quality I cannot wait to get one. Super expensive but it’s a lifelong blade.. how cool is that?? Another great video! Way cool you’d put your stuff through this so we know what we can and can’t do. Much appreciated.
@robertjr8239
4 жыл бұрын
I’d have laughed if that truck ran it over when he threw it. 😂
@perspectiveflip
2 жыл бұрын
that would have been the real test
@tylortylor5889
3 жыл бұрын
I like the videos this guy makes when it comes to knives. He doesn't bullshit around. He shows you what is good and what is bad.
@XRING
3 жыл бұрын
Thanks Tylor and thanks for watching!
@tylortylor5889
3 жыл бұрын
@@XRING any time. Bought a microtech single action recently. It's awesome.
@XRING
3 жыл бұрын
They are definitely addicting !
@bradleyswasey6778
4 жыл бұрын
A lot of other auto's would have just stopped working. Microtech's are awesome. Seeing you do that was like wow, I'm glad that one isn't mine lol.
@kotaboy32
5 жыл бұрын
One of these days I'm gonna have to join the club
@XRING
5 жыл бұрын
Kotaboy32 Tactical I know a guy!
@WTFSoCal
5 жыл бұрын
damn skippy
@8FunGuy8
4 жыл бұрын
Kotaboy32, nickles store had some good prices, I'm sure they could help you out. My favorite is utx-85, socom manual, and sigil form microtech.
@doddgarger6806
4 жыл бұрын
With all that money sure.. I will stick with a mora robust if I ever need to torture a knife like that
@jeffreymiller9706
4 жыл бұрын
After this abuse and discount eligibility...why buy anything else.
@Rusonekox9
3 жыл бұрын
Love it. "A knife is meant to be used" How true is that
@thepath6155
4 жыл бұрын
Thanks for doing these tests. I find the “safe queen” / “collectible” reviews to be worthless. I’ve carried a knife since I was about seven. As you said, they’re meant to be used. I’ve got a couple of OTF Microtech clones from the gun shows. I like the OTF because it’s one handed IN as well as out, but assumed they were too fragile to be a working knife. After seeing these I’m getting a real one. Kate
@TheCaptain008
4 жыл бұрын
Even the clones are pretty cool and solid. I definitely want a real microtech tho.
@MemphisMike901
3 жыл бұрын
My son just brought his back from 2 weeks active duty. It was covered. In hardened Mortar. Sprayed lots of Remoil And PB Blaster in it. Then blew off the mortar with a pressure washer. Lubed it up snd blew it out with air compressor. Fires as good as day one!!!
@user-ge3gc6lt5r
2 жыл бұрын
Shining
@bradmcnew6754
4 жыл бұрын
I am a Corrections Officer and that is why I bought mine! RAY!!!!! Great job! You prove why Microtech makes them. BTW, I have the Ultratech T/E Tanto Blade (no serration) aqua blue.
@XRING
4 жыл бұрын
Awesome Brad! I hope you went though the LEO/mil program directly through Microtech. They will treat you right.
@bradmcnew6754
4 жыл бұрын
@@XRING no I did not go through the program. I went in uniform to Bear Mountain Outfitters (St. Augustine, Fl) on the way to work and they hooked me up. But I dig my blade!
@fredminpin
4 жыл бұрын
Was always skeptical of the look, design, use, etc, especially for the price lines, but seeing such torture tests (and not that I could or would intentionally to a personal knife), now I really want to get one! Hopefully I can qualify for the program you spoke of. I also appreciate and admire when a company can display such pride and performance in their products, and for people who've literally worked entire lives in those fields or professions. Semper Fi & Thanks!
@XRING
4 жыл бұрын
You will qualify if you served and it sounds like you did! Thank you for your service and I thank you for watching. Have a great week.
@bbscmvsa7411
4 жыл бұрын
Subscribed the moment you Nolan Ryan'd that Ultratech! 😂 Ordering one from Blade HQ tomorrow. Thanks for the review
@e7tegt503
2 жыл бұрын
Wow. Thought otf’s were fragile. This one sure isn’t. Great test. Thanks.
@WVFAN1958
4 жыл бұрын
I thought you was going to throw it in the mower deck. 😂...thanks for sharing
@zackphy
Жыл бұрын
Don't forget EMS, my wife is a paramedic and she gets the discounted price as well. Love Microtech for that, and this knife as well. We both have that exact model, just with a Tonto non cerated blade. Knew they were great knives just didn't know how tough they really were. Glad to know they'll hold up to that much abuse.
@randallscott-key802
2 жыл бұрын
I got into OTF knives about 3 years ago. Started out buying cheap. Heard about Microtech, and "the price" to own one and immediately ridiculed it as a sucker buy! Then I watched some of these torture tests. I had already disassembled every one of my budget knives to see how well they were made, but without the real thing how could I tell? So I went against my better judgement (I thought) and bought a UTX85 distressed red D/E. The INSTANT I pulled that thing out of the plastic sleeve I knew it was on a level not even dreamed of by all the others - including some not so inexpensive brands. The quality was evident - fit perfect, finish perfect - well the distressed finish was "perfectly distressed" I guess! The blade was so crisply detailed, profile refined, razor sharp, and of course made of the highest quality steel - I read up on that too! So, I took it apart - I had to. It called to me to peek inside. Came apart easily and even the INSIDE is fully finished! The alloy chassis is perfectly executed with crisp, even, straight lines, but then came the best part...the very HEART of what makes a Microtech superior - the blade locks! If you haven't seen them with your own eyes you've missed the best part of owning a MT OTF! The locks themselves are 1.52mm thick with perfectly radiused opposing edges. The locks fit into precision cut recesses in the chassis that allows hinged movement only with no excess play, and here is where those radiused edges matter: At the "back" or hinge edge, the radius creates a perfect rotation. At the "front" or blade engagement edge, the radius swings down behind the upper edge of the blade shank - the shank being precisely angled to match the lock's swing arc, and when engaged, the radius causes all tip forces coming through the blade and into the lock, to cause the lock to "wedge" (for lack of a better term) INTO lock! Repeated hammering against the knife body cannot cause the lock to "bounce" out of engagement because of the perfectly designed, engineered, and executed geometry. I have not found this level of precision and clear understanding of the mission of a front blade lock on ANY other brand of OTF! Benchmade comes close with their twin-lock and 3-point lock-up, but the execution is simply not as precise. Even the size and style of screws attaching the top cover to the chassis is well thought out from an engineering standpoint...the screws have large flanges that apply tremendous clamping force between the handle-halves, making the knife body extremely strong. When I see other brand knives with their small flange screws located around the perimeter I am immediately reminding of how much weaker is their shell construction. $275-$300 for an Ultratech or UTX85 is a BARGAIN! They are so pretty, few want to use them for fear of damaging the pure looks, but they can take a beating, and undergo hard use and still function when other knives - even hinged blade knives will have snapped. I now own two UTX85s, an Ultratech, Troodon, Dirac Delta, with another Ultratech on the way, and a Combat Troodon on layaway! In contrast I only have two BM Infidels - the electric blue limited, and the olive green limited. I only have two Guardian Tactical - 035 and 040 - love them both and they're strong-built, but not VAULT-built! The GT 040 throws a massive 4+" blade. But for the money, MT knives are actually good buys.
@MegaYangman
4 жыл бұрын
Don't know if I would ever subject my ultratech to that kind of torture but good to know it can withstand a beating in extreme situations.
@garrettferrell6821
4 жыл бұрын
Makes me feel even better about my recent $300 Ultratech purchase..mine is turquoise with black blade and hardware..it’s a single edge drop point blade in 204p..it’s truly an amazing knife
@XRING
4 жыл бұрын
Thanks Garrett and thanks for watching the channel. Since this video was filmed, I have taken a job with Microtech and have made a few videos on how we make the Ultratech. The series is called How and Ultratech is made. How a Microtech Ultratech is made. PT. 1 kzitem.info/news/bejne/26hqs5mpo4d6jWk
@garrettferrell6821
4 жыл бұрын
That’s awesome,congratulations on the job.as a knife lover it seems like it would be a job I would enjoy...I will have to check out this series
@stringtwister7654
5 жыл бұрын
Sold I will be buying one now. Thank you
@XRING
5 жыл бұрын
string twister My pleasure string twister and thanks for watching. Just remember to blow out the chassis with air or rem oil occasionally to keep it running 100%!
@claybaybay740
4 жыл бұрын
I bought me a Ludt just got it in the mail a couple days ago...and man I had never seen one or held one in real life video doesn’t do it justice...there such high quality knives you feel it the second you pick it up and fire it with it’s amazing action...100% happy and highly recommend microtech...I have a 300 dollar Zero Tolerance which I still absolutely adore but my LUDT has been in my pocket since I got it...you should get yours with a satin blade finish it’s so nice to look at
@claybaybay740
4 жыл бұрын
They exceeded my expectations I will from now on be a lifetime microtech customer and will always talk highly of the company thats how happy i am with my knife 😄😄😄
@bullridermusic2054
3 жыл бұрын
@@claybaybay740 I'm jelouse, there is something about the LUDT especially the auto version that is probably my favorite auto side flipping knife out of all of them. There's something about it that's just amazing, maybe because of the looks and it's meant for underwater demolition LOL.
@RevGunn-jq3cq
5 жыл бұрын
Battle worn! boy I’m just thinking about all the lies I could tell about my adventures with that knife.....great product
@wgollyhorn
4 жыл бұрын
You should do a disassembly after all the torture test to see if there is any damage to the lock
@randallscott-key802
2 жыл бұрын
There won't be. For the lock to be damaged the entire chassis must be deformed which takes a lot! MT blade locks are perfection to behold and engineered for positive engagement under tip pressure - the harder you hammer, the more the front lock holds! Not saying you can't destroy a MT if you beat on it hard enough - FAR beyond even extreme duty use, but you will never destroy one without the aid of heavy hammers, and solid backing, or deliberately flexing the blade as hard as possible sideways. I'd trust my MT DA OTFs to stand up to abuse that would split the handle and warp the blade mount of many of my hinge bladed knives!
@natm3145
Жыл бұрын
It wouldn’t work if it was damaged
@rockmahala
3 жыл бұрын
I thought he was gonna send it with the mower blades!!🤣
@bullridermusic2054
2 жыл бұрын
ohh man now that would do real damage, I caught residential lawns with zero turn mowers for about 4 years now, and I have seen what the mower blades can do to metal or steel when they come in contact. Don't ask me how I know this lol. It would quite possibly, if it hit it right, almost cut it into pieces.
@murrayannandale
4 жыл бұрын
Well, I always thought they look cool but are finnicky and can break down easily. I just ordered my first after this video! A blue with black drop point. Cant wait!
@XRING
4 жыл бұрын
Thanks Laeveld. Just remember that they do need to have a little Rem Oil every few months. They are reliable if you do your part with servicing occasionally. Thanks for watching.
@jeffreymiller9706
4 жыл бұрын
Can't thank Microtech enough for their support of this program...I'm ordering Monday. Straight edge or partially serrated and WHY. YOUR reviews are unreal...thanks!!!
@XRING
4 жыл бұрын
I prefer partially serrated for hard use. Nothing cuts webbing or nylon like serrations. Downside is you can’t sharpen it easily but you rarely have to anyway. Thanks for watching
@jeffreymiller9706
4 жыл бұрын
@@XRING Thanks Man!
@DavidV4444
3 ай бұрын
Phenomenal knives - I have several and love them all.
@choirboyzcutleryoutdoors
3 жыл бұрын
You are terrible for my wallet!! Great video!!
@treyrahman
3 жыл бұрын
When he was standing next too the truck i thought he was gonna go ham on the tires and stab the hell out of them 🤣🤣🤣🤣
@paga8392
Жыл бұрын
the hesitation before slamming it😂 great test video bro
@ravenfeeder
3 жыл бұрын
Meanwhile, I cut some tape with my Ultratech and forget to scrub the edge on my jeans and it gums up 😂
@ryannafe9252
3 жыл бұрын
I have to say, these videos where you’re doing pretty demanding stuff with the Microtech OTF’s are pretty interesting. I never would have thought they were that durable, not even close. I might have to get one now, they actually seem like decent tools on top of the obvious cool factor of the designs. Personally I could do without the high-carbide steels but oh well.
@lindboknifeandtool
3 жыл бұрын
Totally agree. If they had a line with cpm154 or similar high strength steel for less $$$ them I’d be all over it.
@jamesfair9751
2 жыл бұрын
@@lindboknifeandtool they use to use cpm154 before the new super steels became the rage. Of course if you find one that old on the secondary market it’s gonna cost you the price of at least 3 new ones.
@lindboknifeandtool
2 жыл бұрын
@@jamesfair9751 it’s what they should still be using. They use m390 and it’s analouges but run it soft. So, it has the edge retention of s30v or worse, the toughness of m390 (very low) and still call it premium. That’s microtech telling us they think we’re dumb. And we are, because most people won’t understand/disagree with what I’m saying.
@lindboknifeandtool
2 жыл бұрын
@@jamesfair9751 I’m always on the lookout for a 154 socom they’re super hard to find and not really worth it sans collector reasons.
@live4wild968
5 жыл бұрын
Well made knives. I love mine and I carry mine everyday
@XRING
5 жыл бұрын
I’m glad you still have that one Live4Wild! You can’t beat them.
@live4wild968
5 жыл бұрын
@@XRING Thanks Ray.
@garrettferrell6821
4 жыл бұрын
I just bought my first Ultratech and I can’t barely even keep it out of my hand..lol..she is definitely my favorite and most expensive knife..I didn’t think I would ever talk myself into spend over the $200 I spent on my Spyderco Autonomy 2..this time I’m serious,$300 will be my max but man are them Hellhounds blades beautiful..lol
@gsxr1189
5 жыл бұрын
Nice to see some Microtech content on the channel! That poor UT can take a beating.
@XRING
5 жыл бұрын
Gs Xr Thank you. Not done with that poor thing yet!
@theseekerndestroyer
2 жыл бұрын
Definitely the best review. Ordering 2 as of now.
@SargentChiefton
Ай бұрын
Id like to see a torture test of the hera 2 gen 3. Im curious about how the hidden fasteners would hold up
@marcusinfestus1333
Жыл бұрын
I can't tell you the emotions I went through when you explained what you were about to do... then you immediately threw it again 🤣
@flaco5581
4 жыл бұрын
Tougher than I expected.
@N3wbMa5t3r
2 жыл бұрын
Microtech says spray Rem Oil into the knife slot when your first get it and then use compressed air amd spray the excess out.
@tomahawk5118
2 жыл бұрын
One on the way! What a cool company to offer such a product to service personnel.
@TechnicallyJustin
Жыл бұрын
I have this same knife. LEO edition with front serration. I saw a video of a cop recently who used the same one when he got in an accident. Cut his seat belt and broke the window. That video combined with this one makes me glad I kept mine.
@adriankalebra666
4 жыл бұрын
God that throw killed me 😥😥 I like watching these videos but damn lol
@gunnwild1
5 жыл бұрын
You're gonna make SoCal cry by beating up his favorite knife brand =)
@XRING
5 жыл бұрын
gunnwild1 Tell me about it ! I think I put him onto these! Hey, it’s my favorite brand as well 👍🏼
@WTFSoCal
5 жыл бұрын
there is more to it than that LOL
@tkostang
Жыл бұрын
Metal Complex told me to come check out your channel. Subbed!
@austinnewby9666
Жыл бұрын
My freaking heart sank when dude rared back to launch that beautiful knife
@mikeelek9713
3 жыл бұрын
I'd love to see you try this with one of the Chinese knockoffs - particularly the part where you drive over it with the truck.
@perspectiveflip
2 жыл бұрын
yup they sell replicas for around 30 bucks
@nunyabizness3882
Жыл бұрын
The replicas hold up just as well for the most part. I've seen some out preform real Microtechs. So of you want to run over your knife but not spend $300-$400 to do it, that would be an option.
@komama1983
8 ай бұрын
I've done these test with my hifinder knockoffs and they passed just as well as the microtech. I also have many real microtechs but abuse the knockoffs
@95ZR580
2 жыл бұрын
I just ordered my first microtech. Havnt even got it yet and im a fan boy.
@joshronalds5112
3 жыл бұрын
Just joined the club. Red d/e stonewash Ultratech 🤙🏽
@kellyjoplin3153
4 жыл бұрын
Thank you for really testing these tools
@XRING
4 жыл бұрын
Thank you. I appreciate it.
@waynestyles2798
3 жыл бұрын
That last throw at the ground was hard to watch...
@joaquin-jacknava2696
5 жыл бұрын
Great torture. They are great knives. Good looking truck there.
@XRING
5 жыл бұрын
Joaquin -Jack Nava Thank you Joaquin!
@uselessrocket
5 жыл бұрын
Was sooooo painful to watch!!!! My heart stopped couple of times. Good knife. Crazy crazy.
@XRING
5 жыл бұрын
uselessrocket Thanks Man! Was hard for me to do it as well. Still carrying it.
@jmas2190
4 жыл бұрын
Great job have my first one on it's way. Made me a believer glad someone else had to do it not me. Great video!!
@JadeGeminiM390
4 жыл бұрын
I cringed infinitely when he said he was going to throw the knife.
@XRING
4 жыл бұрын
Me too! 😂
@LoganLawrence
Жыл бұрын
I wish they wouldn’t make the actual build out of aluminum. I get they try to make it light weight for edc but I’d rather have a more durable knife.
@scottf.3808
5 жыл бұрын
That was a good torture test....Good stuff....
@David_DY
4 жыл бұрын
Just bought my first Ultratech can't wait to check it out! 👍👊
@NM-apache
4 жыл бұрын
I just bought the Exocet. Was not really a MT guy but it is a cool knife. Great vid man!
@XRING
4 жыл бұрын
Thanks SW-edc. The Exocet is a neat one for sure. I did a video review of one. It kind of surprised me.
@WVFAN1958
4 жыл бұрын
I save all my MICROTECH BOXES...15 and counting. Tuff blades.”love them.’’ Keep up the great work. Semper fi. Thanks for sharing your videos.
@XRING
4 жыл бұрын
Yeah, definitely want to save those boxes. Especially if you have any customs.
@Jx12346
4 жыл бұрын
I only have one box, the one my utx 85 came in In February to replace my pro tech cqc7. Just ordered an ultratech
@XRING
4 жыл бұрын
@@Jx12346 I think you will like the Ultratech for sure. Congratulations on the new purchase.
@papasplace2
5 жыл бұрын
It killed me watching trash that beautiful knife...lol
@XRING
5 жыл бұрын
I know.... me too.
@charlesholland6851
4 жыл бұрын
Me too. But it confirms me buying one in a few days
@seantynan109
4 жыл бұрын
Has anyone had issues with their otf by Microtech not functioning properly in cold temperatures? Just got a UTX-85 and it will not deploy the blade fully anytime the knife gets below 40F. Hoping this isn't normal and I can get it replaced.
@XRING
4 жыл бұрын
Sean Tynan Hello Sean, I have heard that using lubricants or lack of lubricants other than Rem Oil can cause this issue. Have you tried flooding the knife with this and using compressed air to remove the remaining oil?
@tinovalle5278
4 жыл бұрын
Howdy X-RING. Your suggestion to use Rem Oil is exactly what Microtech recommends and they also have a quick video to help show how to maintain their OTF autos. I’ve experimented with many different conventional and synthetic lubricants in one of my Ultratechs and Rem Oil is the only lubricant I’ve found that doesn’t slow down extension/retraction of the blade. Also, for anyone else who might read this comment, stick with compressed air in a can like one would use to lightly dust electronics or computers when you blow out the excess Rem Oil. Ultratechs have four small springs inside and two small pivoting lock-open, lock-closed latches that might be blown out of place or even bent if a person used high air pressure from any shop compressor. Anyhow, that’s my two cents and I hope it helps people maintain their Microtech OTF knives. Please keep making your very informative videos. I learn something from every one I watch.
@XRING
4 жыл бұрын
Tino Valle Thanks Tino and thanks for watching. Not sure if you know, but I now work for Microtech. I appreciate you watching. Have a great week.
@tinovalle5278
4 жыл бұрын
Howdy X-RING and thanks for your reply. Sorry about my long-winded comments. I didn’t know about you working for Microtech until after I had droned on and on a couple of times while commenting. I was just trying to be helpful (I think you probably realize that). Anyhow, please keep making your very informative videos but please, pace yourself when hacking through tires... this old man damn near had a heart attack watching you work. ;)
@WTFSoCal
5 жыл бұрын
shall I presume a Combat Troodon is next, Perhaps a Halo 6? Make it a ray skin Socom with a Borka Blade ! LOL . nice test man !
@noremorse6898
4 жыл бұрын
All well and good, but just drop it in the sand one time and it won't be working until you disassemble and clean it. I was using mine to cut some leftover polyethylene silt fence that a construction crew left behind my house when I got a little dirt inside it. Totally jammed it up until I took it apart, cleaned and lubed it. I still love my Ultratech, however, and carry it every day.
@-Cold-World
4 жыл бұрын
I will not do this to my Ultratech. Thanks for the cool video.
@No1ANTAGON1ST
2 жыл бұрын
Vid still holds up!
@talkingrock7011
5 жыл бұрын
Very durable knife , it should be now see if a Bench Made can hold up to Rays knife test
@XRING
5 жыл бұрын
Unfortunately l, I don’t have any Benchmade knives.
@talkingrock7011
5 жыл бұрын
This could be a opportunity
@XRING
5 жыл бұрын
talking rock Dang! That means I will have to buy one !
@jorgelongoria1098
4 жыл бұрын
Thank you for the videos! Got mine and it’s a beast!
@badbilly429
5 жыл бұрын
Now that Michigan allows single edge blade automatics one of these days I’m gonna have to give up my carbon fiber zero tolerance for one of these
@XRING
5 жыл бұрын
badbilly429 CF ZT is a nice one. Glad Michigan changed the laws on the OTF’s
@mattjimenez4151
4 жыл бұрын
That last slam just about did it in...
@XRING
4 жыл бұрын
Almost! Still going strong and using it everyday. Even used it on the Bulletproof test video.
@jamesfair9751
2 жыл бұрын
When he first threw that beauty my first thought was I wanna take you and throw you as far as I can! Damn man gotta do a great knife like that
@marveen6372
Жыл бұрын
That’s one hell of a blade strongest I seen
@sonofliberty78
Жыл бұрын
I’m glad that Microtech has A discount program for veterans, but it’s quite limited and miserly; compared to Spyderco’s
@zilch7116
4 жыл бұрын
That’s the issue is sand, or debris, in the field I’ve seen them completely inoperable because of simple sand and such
@Adam_Newman
4 жыл бұрын
Excellent Knives
@IY6C
5 жыл бұрын
I love mine. Works great. Good video
@XRING
5 жыл бұрын
Isyour6covered® Thank Rick!
@ericredd7464
11 ай бұрын
I have bought 2.....the first wad the "Fire Ant" Makora....great knife....but someone made me an offer for a trade that I ended up doing.....plus I had it for YEARS. Now I have a Ultratech....great knife. It is my everyday carry....just like the first one. Great knives.....durable. the only thing is sharpening the double sided blade is a little awkward but....the knife is tough.
@active4delta
3 жыл бұрын
Just picked one up brother. Thanks!
@commiesarehorrible7622
4 жыл бұрын
Looks like a pretty tough knife. I might have to grab one.
@navyvet05
3 ай бұрын
How did you get such a smooth trigger? Mine almost requires 2 hands to deploy sometimes. Its stiff as hell.
@koreyg7674
3 ай бұрын
Is it your first microtech?
@navyvet05
3 ай бұрын
No, i have 2. My other one is stiff as well, but no where near as much.
@bsellers711
4 жыл бұрын
I feel like the guy in Bill Burrs helicopter story! What the F$@%! What the F%@%in F$@#! Lol
@martijnj3508
2 жыл бұрын
If he would’ve hit the truck with the throwing test with the glasbreaker side and the windshield broke. Now that would’ve been real funny 😆
@toddk1658
2 жыл бұрын
my ultratech half deployed when it fell out of my pocket onto the garage floor ,wondering whats wrong with it ,if hes throwing it and its not deploying
@Collie-OutDoor
4 жыл бұрын
好嚴格的測試方法!微技術真耐摔!謝謝版主!
@charliegautier3343
Жыл бұрын
Not gonna lie, that hurt my soul to watch. But I appreciate the video. Been skeptical about one but the video helped me out.
@nakaji899
4 жыл бұрын
凄い!!この強度が知りたかった!有難う!!
@professorbland
8 ай бұрын
I thought he was going to put the knife in the lawnmower blades and I said dont you dare
@billyfrear2340
6 ай бұрын
I would like a before and after of the innards.
@michaelelliott330
5 ай бұрын
Just out of curiosity, what do the internals look like after all these tests?
@XRING
5 ай бұрын
Fine! I still have these knives
@michaelelliott330
5 ай бұрын
@XRING it's Because of your videos that I bought a gen 3 Combat Troodon, then after receiving it, I purchased an Ultratech 2 the same day.
@yohannmawash4209
5 жыл бұрын
very good
@XRING
5 жыл бұрын
Yohann Mawash Thank you Yohann.
@msmith7341
3 жыл бұрын
Showing this to my wife...."wow he threw that really far" -wife
@ramboyearone
4 жыл бұрын
the greatest OTF enemy is dirt, not falls from skycrapers nor standing tons of weight. Oil, grease, fruit sugars, dust, sand and even blood are much more likely to happen than the BS situations you saw in this video. Those elements CAN and usually ARE enough to get the blade stuck inside and the knife useless. Have some blood getting dry on the internals will make your microtech useless. So much for this test and the law enforcements claims made by microtech. And I am not TALKING. I am carrying first hand experience. I love Microtech, Marfione works, etc, but military and LE should stay away from ANY otf knife. That's it.
@XRING
4 жыл бұрын
I agree that the biggest enemy of an OTF is dirt/sand. This was a very impromptu video but I have real tests on other OTF’s. I completely disagree with you that LEO/Mil should stay away from from them. If you maintain them like anything else they are fine. Remember to wipe the blood off before you retract. Carried them for too many years in “real” Leo/Mil capacity to argue about it.
@ramboyearone
4 жыл бұрын
@@XRING I have a lot of respect for those having professional background/actual expertise, and even more in these days of the internet when too many people reject science / actual experts, etc. I am not one of those guys and appreciate your experience. Yet, in this particular case I have to repectfully disagree with you for one simple reason: you don't take less reliable instruments on the field (or requiring more maintance, which is the same) when those same instruments give you ABSOLUTELY NOTHING in return for that 'more demanding maintenance'. And that's exactly what an OTF brings on the table when chosen over a side opening folder: zero, nothing, nada. A side folder is cheaper, sturdier, less sensitive to dust and dirt and there's no single task in the world an otf can accomplish that a side folder can't (and the side opening usually does it better!!). And here comes the part contaning a very respectful 'don't BS me'. Dear X-Ring yes, I believe you carried and used a microtech OTF for years and had very few issues thanks to a very careful manitenance and care... just don't BS me: THE ONLY REASON YOU DID IT WAS THE COOL FACTOR. And frankly said I have problems with military / LE taking decisions based on the cool factor. I hope you will appreciate my frankness. That said, I love microtech as much as I hate their military / LE 'talking' at the same time. They touched the bottom with their jackcommando design... I love their arts and designs, but I hate when they mess with 'serious things'. Peace and love. You have an awesome channell.
@XRING
4 жыл бұрын
wallace lee I appreciate your response and respect your point of view. In all fairness, if you watch my channel I have carried my Socom Auto for 19 years. I really didn’t purchase it for the cool factor. I purchased it because 19 years ago there was not a better knife out there. It was the most expensive knife that I had ever bought up to that point . It was always Cold Steel up until then. In 2013 I started carrying 2 knives....the Socom and the 2013 Combat that I still have and carry. It was never less reliable for me but I am a stickler for maintenance on everything. I do not carry the Ultratech or the X-85. Good knives, but not big enough for my liking. I appreciate you watching and commenting on the channel. Differing views are not always a bad thing.
@ramboyearone
4 жыл бұрын
yep, I was talking about OTFknives only. Let's say my reply goes to those soldiers (and there were actually more than one) that carried Benchmade Infidels in the middle east...
@davidosako4680
4 ай бұрын
I got blood in my microtech and haven't cleaned it and also it went 3-4 inch in my hand so blood definitely went inside I haven't cleaned it in 4 months and my knife shoot and closes fine with no mess ups 😂😂😂😂
@18echo
3 жыл бұрын
Thats what i call a post apocalyptic look
@christopherdaniel5919
2 жыл бұрын
I'd expect the mechanism to be sound. But damn! 🥺 That poor finish!😔
@wnctarheel9626
5 жыл бұрын
Nice torture test. A friend of mine has one of their knives but he doesn’t use it much because he doesn’t want to lose the edge. Are they hard to sharpen if you use them a lot?
@XRING
5 жыл бұрын
They will sharpen it for you. Lifetime warranty but not for abuse!! Made in the USA. Right here in WNC!
@TheCaptain008
4 жыл бұрын
Hmm. I think your warranty may be voided.
@XRING
4 жыл бұрын
LOL! No Doubt!! This would be classified as abuse AND neglect. 😂
@doejon9424
2 жыл бұрын
What the heck is he hiding on the dlc coating right under the clip ? His personal info laser etched into the handle??
@andrashavas
Жыл бұрын
This is the test of the handle of the knife, not the knife itself. How about using it?
@wesleywarsmith1113
3 жыл бұрын
Well I woudnt do that to mine but thanks for showing us.
Пікірлер: 388