For some reason BBSHD, M625 and M635 mosfet heat spreader plate is not bolted tight against the housing compared to Toseven DM-01. Strangely nobody talks about it but atleast BBSHD has thicker phase wires for better efficiency (that might not matter since they are short anyway).
@philflip1963
Жыл бұрын
An excellent review covering most of the important issues, Thanls.
@LierskogenEbikes
9 ай бұрын
Thank you!
@pxl666
Жыл бұрын
thank you for the teardown. hopefully they deliver good product . can't wait to see you test this thing in the full suspension ebike shredding some trails . cheers bro
@LierskogenEbikes
Жыл бұрын
Pozdrawiam rodaka :)
@pxl666
Жыл бұрын
kedy test w rowerze?
@PhobosYT
Жыл бұрын
Świetny materiał!
@lokz9632
Жыл бұрын
Great introductory review! Many people on Pedelec forum were waiting for one. I am impatient to see your next video about this motor in use. Also, I hope you will make a review of DM02 version, it is slightly different. Most important question is: How sensitive torque sensor will be.
@LierskogenEbikes
Жыл бұрын
I just received DM01. Working on a movie from tests now. DM02 is a clone of TSDZ2. It will be interesting to compare these two as well.
@Alex-uh1mj
Жыл бұрын
@@LierskogenEbikes its not a clone, its not accurate
@TL1000S97
Жыл бұрын
Very interesting. Finally a torque sensor for this type of BBSHD "clone". Looking forward to further testing of this motor. 👍
@LierskogenEbikes
Жыл бұрын
I'm working on the movie from tests.
@Shreddykruger
Жыл бұрын
Whats the chain line like better or the same as the rest
@LierskogenEbikes
Жыл бұрын
Chain line is OK. I don't have problem with falling chain on the smallest gear.
@rickardkevaanranta7808
Жыл бұрын
But is the motor housing as big as bbshd? Will it intrude the chainstay like bbshd does?
@syntxansyntxan7543
Жыл бұрын
Have you tried it? What degrees of incline can you climb without pedaling?
@LierskogenEbikes
Жыл бұрын
I made a separate video from tests. Watch it. I have no way to measure the incline of hills in the forest.
@remziakyuz
8 ай бұрын
Hi, I cant unterstand the material of the maingear and another gear. Are the gears metal or plastic ? Thanks.
@LierskogenEbikes
8 ай бұрын
The first gear is plastic, second one metal.
@remziakyuz
8 ай бұрын
@@LierskogenEbikes Thanks a lot for your information.
@markbfenton
5 ай бұрын
Hey- thanks for the excellent teardown and presentation, it's very helpful. Do you know the millimeter offset of the 46t chainring it came with? Toseven sell 36t, 38t, 42t, 46t and 52t 9mm offset chainrings from their store. Would these have the same/less/more offset than the original?
@LierskogenEbikes
5 ай бұрын
I don't have that kind of details. You need to contact ToSeven directly.
@Shreddykruger
Жыл бұрын
Hi how did you split the motor apart when you show the stator and rotor section.i took my motor apart and it opened up slightly but it would not split fully I did not want to force it as it was brand knew and I wanted to grease the gearbox .but decided to just leave it as it would not spilt easily cheers.
@LierskogenEbikes
Жыл бұрын
You need to remove 2 screws holding the PCB board for the phase lines connectors. This PCB board is connected to stator.
@diyelectricbiker9361
Жыл бұрын
This is interesting for sure.
@johnarnebirkeland
11 ай бұрын
How is the chain offset? Using BBSHD on my full suspension bike I have to use a 42T wide chainring with 22mm offset to get proper alignment.
@LierskogenEbikes
11 ай бұрын
Not bad, but the problem can be fairly large front sprocket - 46T. You can't fit smaller one and maintain same offset as original.
@nobrakes7247
Жыл бұрын
Thanks mate
@chipkhalifa4138
Жыл бұрын
Nice video I watched all three videos in the series… can this motor work on a 52 volt battery?
@LierskogenEbikes
Жыл бұрын
Probably it will work with 52V, but as I remember in the display menu I was able to set battery type only to 36V and 48V.
@chipkhalifa4138
Жыл бұрын
@@LierskogenEbikes thanks
@Alex-uh1mj
Жыл бұрын
@@LierskogenEbikes it has a setting for custom and will work with up to 16s 60v
@Alex-uh1mj
Жыл бұрын
@@chipkhalifa4138 up to 60v battery
@LierskogenEbikes
Жыл бұрын
@@Alex-uh1mj I haven't seen the 16s battery option in advance menu in firmware version from September. Did you updated this recently?
@syntxansyntxan7543
Жыл бұрын
Can this motor kit climb mountains without pedaling?
@LierskogenEbikes
Жыл бұрын
Yes
@pxl666
Жыл бұрын
hey . did you set up bike ? is this working ?
@LierskogenEbikes
Жыл бұрын
Yes, bike is completed. And motor works fantastic :). I need couple of days to wrap up all video materials.
@pxl666
Жыл бұрын
@@LierskogenEbikes shieeeet bro . half of the internet is waiting for it !
@pavelsechanov3459
4 ай бұрын
Has a TOSEVEN bb 120mm?
@LierskogenEbikes
4 ай бұрын
No, max 110mm.
@mikethomas6051
5 ай бұрын
My advice on connectors, cut off the anderson poles, they are not fit for purpose with the type of currents these motors use, i have 3 bbshd's so similar amp and current range to dm01 and after having my anderson connectors part melt and start giving bad conductivity i cut them off and use xt90 instead.
@LierskogenEbikes
5 ай бұрын
DM01 is more subtle than BBSHD because of torque sensor. In theory it push 30Amps into motor core, but that's only when you press hard like riding uphill situations or driving on throttle.
@InfiltrateIndustries
Жыл бұрын
Custom firmware available?
@LierskogenEbikes
Жыл бұрын
No, not available.
@przemysawpietrucha7275
Жыл бұрын
💪👍
@JohnSmith-sj2dk
Жыл бұрын
Hmm so now with this new motor when my battery goes flat I will be still be able to peddle with minimal motor drag?. - thx.
Пікірлер: 51