Thanks for that clear, concise, well presented guide! I'm doing this same job on my 2012 200S, and you covered everything I needed to know.
@coachsaldana5708
Жыл бұрын
This is the best "How To" video of this process on KZitem! No one even close. Thank you
@FixiT-Rick
Жыл бұрын
Glad it was helpful!
@staceymorgan-green7926
11 ай бұрын
Thank you, very good information❤
@IRONSIDES1968
5 ай бұрын
Great video, getting the glue off was a pain. Other than that it went pretty smoothly. You did a really good job on breaking it down to keep it manageable.
@SLGlass
9 ай бұрын
Thank you so much I love your ending it encouraged my heart where are you located
@RalphPurificato
Жыл бұрын
Thank You again Fix it Rick, I sent the first one back and put the second one in, in about 20 minutes. And it works. I may have left some protective film on the sides the first time or it was defective. All fixed for about 29 dollars.
@FixiT-Rick
Жыл бұрын
Sweet!!! That’s awesome.
@psychocycledad
25 күн бұрын
I have a 2012 Chrysler 200 with the same issue. Thank you for the video and the link. Im going to try this out.
@ghostface1888
9 ай бұрын
Thank you so much!
@MISCDesigns
5 ай бұрын
Dude I accidentally let go at the step on 1:07 and it was a whole b*tch getting the screws back into place. Luckily, I was able to apply the new screen successfully. Thank you for this tutorial.
@user-sj1mz9qh2y
Жыл бұрын
Will this screen and how to video work with a 2017 Chrysler 300 S???
@marcisaacs9407
6 ай бұрын
What size is the screen in inches and could it work for a Subaru 8” in a 2019 legacy?
@alexcandee9162
6 ай бұрын
Thank you for the great video. I will be performing this procedure when the part comes in. I have a quick question, do I need to disconnect the battery before removing the touch screen equipment? Thanks again!
@FixiT-Rick
6 ай бұрын
Sounds like a good idea to me!
@Martinez615x
6 ай бұрын
I have an early 2012 Chrysler 300. I bought a 8.4 touch screen of a 2013 and when I plug it in it’s just black. Would replacing the screen be okay ? Any programing ?
@alanchapa1330
11 ай бұрын
Did it but it has like little bubbles inside, for now is working fine but i am not sure if its gonna last. i think the hardest part is removing the glue, did it with the razor but it doesnt go that easily
@larrywinston2779
Жыл бұрын
Thank you so much. I didn`t need to replace the anything. I imagine most just need to clean the screens, to rid them of all of that gooey glue and replace them. One tip, If I may. Instead of using alcohol, simply apply "peanut butter" to the glue, wait 2 minutes and simply scrape the residue off with a butter or steak knife (with the intentions of not scratching the glass), then dishwashing liquid, then alcohol, or glass cleaner to finish up (that whole process will take minutes, not hours.
@FixiT-Rick
Жыл бұрын
Interesting tip, thanks!
@HH70Chevy
Жыл бұрын
Im guessing this will fix cracked screen as well ? Along with changing stations and flickering on its own. Excellent Presentation on changing it out !!!
@FixiT-Rick
Жыл бұрын
If your screen is cracked and changing stations by itself, then yes you're right about changing it out. Thanks for the great comment!
@georgethorn2884
10 ай бұрын
Thank you Fix iT Rick. I got quoted $800.00 - $1,100.00 to replace the unit. $35.00 - $800..00 = $765.00 in savings! Time and effort after receiving the digitizer took no more than 1 hour. You Da Man! Jesus Christ loves you too sir! But you already knew that! Amen.
@FixiT-Rick
10 ай бұрын
Appreciate people like you sir! So awesome to hear. Always good to hear someone remind me of Christ! 🛠️✝️
@SaltioIsEpic
5 ай бұрын
Does this work with older models such as 2014? I know the uconnects are different but is it pretty much the same ordeal?
@MeLawNy
4 ай бұрын
Thank you 🙏🏼
@FixiT-Rick
3 ай бұрын
🫡🐈
@goodgriefministries
Жыл бұрын
wow! great job!
@FixiT-Rick
Жыл бұрын
Easy peezy lemon squeezy!
@fitter70
Жыл бұрын
Thanks!
@FixiT-Rick
Жыл бұрын
You bet!
@melindamunoz8271
Жыл бұрын
Hi, my screen touches itself lol. so, this would help? Like i will be listening to music or on a call and my screen hangs up or starts beeping like if I am touching it. You made this look easy!
@FixiT-Rick
Жыл бұрын
The digitizers screen needs to be replaced for sure. This was the same problem my friend was having.
@camidecker593
Жыл бұрын
Mine dies then same
@FixiT-Rick
Жыл бұрын
The video will help you to replace the digitizer yourself. Simple screws, couple plugs, easy peezy lemon squeezy!
@DemetriusMH
Жыл бұрын
Will this help with anti glare coating issues ? I have a 19 300s so anti glare coating is rubbing off in certain areas
@deniswauchope3788
3 ай бұрын
Yes. The anti glare coating beginning to disintegrate is an indication the whole digitizer is failing, so it's time to replace it.
@larrywinston2779
Жыл бұрын
What do you do if the ribbon cable that was notto be touched comes off? Can I secure it back and plug it into it`s slot?
@FixiT-Rick
Жыл бұрын
Yes you can! If the touchscreen comes back online, you’ve found the problem. If the touchscreen does not work, then it’s time to replace it.
@juniorparker9322
Жыл бұрын
would that digitizer work with a 2008 hemi C 5.7L?
@FixiT-Rick
Жыл бұрын
No, that model will not work. Here's what I could find that might work for you - amzn.to/43f4QhL
@JosephValenti
8 ай бұрын
Mine is randomly clicking , like touch still works but it still has that seperation that looked similar in this video - is the digitizer starting to seperate the likely culprit of this ?
@FixiT-Rick
8 ай бұрын
The digitizer ribbon cable might be loose
@user-iu8qw4kg4n
7 ай бұрын
How Do I do it
@redundis579
Жыл бұрын
Mine works but the screen is forming a bubble of sorts under it. It makes it to where it acts as if I am touching it when im not and basically it fights with me whenever I do attempt to touch anything. I previously looked it up, and before I seen this video I found it was de-laminated. Would this fix the issue?
@FixiT-Rick
Жыл бұрын
If you replace the digitizer, your touchscreen should work perfectly.
@redundis579
Жыл бұрын
@@FixiT-Rick Appreciate it. One place was wanting $400 to fix it plus shipping. The dealer would replace the whole thing for $600. I did not want to pay either of those lol
@luizh948
4 ай бұрын
Hello, I'm from Brazil, I have a 300c 2012. my screen cracked. Do you know how to change??? Is there anything else to do or can I follow the video? great content thanks
@luizh948
4 ай бұрын
Maybe my car is older than the one in the video. the back of my screen has different inputs. And here in Brazil it is very difficult to find this type of parts for this car. There are some others that use the same screen but the background colors are different
@FixiT-Rick
4 ай бұрын
If the digitizer screen gets replaced, I believe your problem will go away.
@Sammmismile
7 ай бұрын
Will this work for the 2018 300s or just the c model?
@FixiT-Rick
7 ай бұрын
Sounds like you want to replace the digitizer screen for a 2018 300s just like the C Model? They might be similar, I don't know for sure. But if it were me, I would try replacing the digitizer. Just make sure to verify through Amazon that the digitizer will fit the 2018 300s.
@mr.october8420
Жыл бұрын
How would i get back my controls for heated and vented seat
@FixiT-Rick
Жыл бұрын
Can they be controlled from the touchscreen?
@RalphPurificato
Жыл бұрын
This video gave me the courage to do this. BUT! I have a DVD player. And the bottom of the screen and vent covering was screwed into the DVD player. I had to take out the DVD player to get the cover off. I have a 2013 300. I had to call the dealer to get my model radio to make sure I ordered the right one on Amazon. My old cover cracked all over as I tried to get it off. No glue mess. Installed the new one. Put everything back ok. BUT! still does not work and this time. I can control what has buttons but noting on the touch screen works. So the investigation begins. Thanks for the motivation.
@RalphPurificato
Жыл бұрын
Sorry meant CD player
@FixiT-Rick
Жыл бұрын
Sounds good Ralph! Be sure that the ribbon cable is not loose but all the way in. There may be a little door or flap that holds the ribbon cable in place. I would try those first.
@javio.9772
Жыл бұрын
Will this fit a 2016 c? I can't find any info online about it
@FixiT-Rick
Жыл бұрын
Use the link in the description to go directly to that digitizer screen. From there, Amazon will ask you make and model car you drive and Amazon will confirm if that will fit your vehicle.
@AmandaVongphakdy
Ай бұрын
I broke my chord connected off the casing how does that impact it
@FixiT-Rick
Ай бұрын
Well that would depend. Was it the ribbon cable or a plastic connector?
@I.jose7
Ай бұрын
The screen on my chrysler start ghost clicking and its just always clicking things by itself do you think its that same screen on this video that i need to fix it?
@FixiT-Rick
Ай бұрын
It’s possible that the digitizer screen is bad. Might need to be replaced.
@anthonydemarco9936
Жыл бұрын
My actual screen is cracked , does the digitizer help with the screen or is that a seperate part that needs to be fixed?
@FixiT-Rick
Жыл бұрын
I would remove the digitizer just to see the crack is on the screen. If you find the screen is damaged, the whole thing needs to be replaced.
@derrickfesser5077
8 ай бұрын
What if your screen is black but the radio still plays. Would I still need a digitizer or just a need radio
@FixiT-Rick
8 ай бұрын
If the screen is black, it might be a blown fuse or loose connection.
@Tabs9fe-py9if
27 күн бұрын
from where i can buy this replacement screen
@FixiT-Rick
26 күн бұрын
Touch Screen Replacement - amzn.to/3H9Zv2o
@Texaco28
Жыл бұрын
Mine is 2011 is it same thing?
@FixiT-Rick
Жыл бұрын
The link back to the digitizer screen will ask what type of car you have and they will say where or not it’s a match.
@georgeaguilar8750
Жыл бұрын
What year is you're car ?
@FixiT-Rick
Жыл бұрын
She's 2012.
@alexvilla4690
7 ай бұрын
i did this and it worked perfectly for the screen but now no music will play
@FixiT-Rick
6 ай бұрын
Might be a loose connection somewhere behind the screen.
@HDSwiftty
8 ай бұрын
I did everything but now my screen doesnt turn on..
@FixiT-Rick
8 ай бұрын
I would check all fuses
@ITzTiggaByotch
Жыл бұрын
Thanks!!! What if the screen jumps to whatever it wants when on?
@FixiT-Rick
Жыл бұрын
You’re welcome! Digitizer screen must be replaced if that happens.
Пікірлер: 79