That quick connection feature is a kilerfeature. Change the loadout depending on the job.
@mannyfran8024
18 күн бұрын
Great belt. As a Have a pouch set up for drywall work with rasp, tape measure, knife and drywall screws. Another for framing/ carpentry with square, hammer tape measure, 2' and 3' construction screws. And another for demo work. And a gun holster. Just swap out for what I need at the moment. No more carrying everything and have an overweight belt. So much easier on the back and knees
@jwbjoinery3623
Жыл бұрын
I've been using the snickers tool vest for a few years now, very comfortable and gets the weight off your hips/lower back!
@massqrs4900
7 ай бұрын
love to see you guys use toughbuilt
@shimyeo4318
Жыл бұрын
I have them. Would recommend but they are massive and bulky. Good for first fix but wouldn't use for anything else! Would recommend the knee pads by tough build!
@ketley1988
Жыл бұрын
I use this system, and I love it! Only thing is the colour, mainly on the belt, wish they did a just black version
@jrsuk1170
Жыл бұрын
I don't know if you're aware but Toughbuilt do a rail that you can fix in your van to hang all your tool belts from. It's a great system but a bit bulky for me 👍
@jayped2420
5 ай бұрын
Nice review mate,I have just got the same setup and I agree,love you're enthusiasm, nice one.
@kelvindawe5123
Жыл бұрын
I've used the full makita belt and braces set up for years especially timber framing but must admit gets heavy on the shoulders with nail guns hanging but always use a small belt secound fixing but there sure is a big choice now keep it up m8.
@darrenroche9225
Жыл бұрын
Great review, what you doing with your old tool belt ,I use a dead on tools for first fixing ,and an irwin for second fix . A good toolbelt is a great addition to any carpenter
@discreetfire
6 ай бұрын
Love these belts! I have the full belt with suspenders. Reco highly this system.
@ioncv5295
Жыл бұрын
Great presentation, thanks mate, I'll get one too.
@eldoradocraftsman3733
Жыл бұрын
I’ve got the same belt. I was thinking about getting the suspenders because it felt a bit heavy to me. It is a quality bit of kit though.
@anthonybrown2143
Жыл бұрын
Looks great and very versatile what was the cost. Great vids
@dakotakavana
Жыл бұрын
As a framer I just bought this with only the tape measure pouch and the project pouch and an extra separate hammer holder for nail guns etc. just the two small pouches holds my chisel knife hammer tape pencil nails with room left for more. Not bulky at all, comfortable even tho I’m size 30-31 and it’s meant for 32+ I cut a lot of the belt pieces off to get it perfect. I was on a budget, but I think it’s good asf until I feel like dropping 200-300 on a belt
@ttdowgcarpentry2390
Жыл бұрын
very very true thankyou for the insite
@dakotakavana
Жыл бұрын
@@ttdowgcarpentry2390 actually an update the belt is complete garbage, broke in 2 days, wasted my money unfortunately
@finnmaceachen5869
11 ай бұрын
I'd recommend using a collated gun for installing plasterboard, makes the job much easier and faster 👍👍
@johnbullough6431
Жыл бұрын
You look loaded up their 👍where did you get them long legged compass from been looking for ages 👊
@MG-wp4gl
Жыл бұрын
When would you advice using a mask and where did you get yours from? thanks.
@TheOchosen
11 ай бұрын
Brother, you’re missing half the belt. Where’s the cushion part? I just got my thought built today haven’t even used it yet and I love it
@SosRecoveryTaskForce
Жыл бұрын
@ttdowg carpentry. Hi mate, I enjoy watching your video. Can I ask you one question how did you get into carpentry? I what to get into carpentry & joinery myself an adult learning any advice to get into this field I have no experience. Keep up with your video
@trembesimeubel1854
2 ай бұрын
Good job men..peace from Indonesia ✌️
@bdizzle7633
Жыл бұрын
Occidental 🙌🏼 Diamondbacks pouches are huge like putting your tools in a pillow case 😂
@calvinbates2786
Жыл бұрын
I’ve been looking at getting this setup where you get it from lad?
@nascorob
5 күн бұрын
Where did it come from, interested as I can’t seem to find that specialist drill holster, could you give a link please? ✨💚🙏
@harbertmoore2663
Жыл бұрын
Which one of those pouches carries the speedsquare?
@MESTER47
Жыл бұрын
Great system, I also have a Thoughbuilt pouch. Just really well made. Are they expensive in Uk comparing with the Us?
@daleflaherty
Жыл бұрын
Very!
@SALAFIDUDE
Жыл бұрын
can you make a seperate video on this job you were doing at the start 😀
@iandudleycarpentrybuilding9302
Жыл бұрын
I’ve had this belt for 3 years now and im not a fan anymore, gives me a bad bag. Im thinking of switching over to truasbuddy rig, looks a lot more comfy. What did you think to your Milwaukee rig?
@ravender8930
Жыл бұрын
Ive used both and I think Toughbuilt is little better.
@karimkalache712
Жыл бұрын
Looks like a solid investment
@heritage_carpentry
Жыл бұрын
Can you do a video on angles for skirting etc/how you do skirting angles. Newly qualified chippy looking for the best way to get spot on angles. Sliding bevels just aren’t Mm perfect
@justicecase19
Жыл бұрын
Get yourself a starret angle finder. Very easy, very accurate.
@larryholland1466
Жыл бұрын
How much was it with all the accessories
@harbertmoore2663
Жыл бұрын
That looks heavy now. You may want to invest in the suspenders! 😅🤣😂
@kierankelly6515
4 ай бұрын
I can’t find the update video. Did you make one yet?
@ttdowgcarpentry2390
4 ай бұрын
I haven't as of yet
@eliotcurtis3551
Жыл бұрын
These are great until you get a gut and have to walk through a door. I’ve just bought the tough built 400 tote, check them out.
@eliotcurtis3551
Жыл бұрын
This is hilarious but only because I can see my self
@jonguptill6603
Жыл бұрын
Was a great starter. Just couldn't keep up to an experienced framers needs 🤷♂️ occidental all the way.
@Lyonscarpentry
Жыл бұрын
Can’t beat diamondback🤷♂️
@ceeeya3440
Жыл бұрын
Seconds that bro Diamond back x snickers vest Dream boat
@ravender8930
Жыл бұрын
Nope Toughbuilt wins💪
@ImFunneh
Жыл бұрын
Just buy some CLC tool bags no need for the expensive occidental for your kind of work
@yurendavidmendoza5511
15 күн бұрын
Calificaciones 6
@yorkrojas1452
7 ай бұрын
Love the review. Just to get it off my back. Im a Drywall hanger and if i seen you hang and cut the way you do you'd be fired on the spot. Just my two cents. Love the review though.
@hsfest
Жыл бұрын
mate am not gonna lie its a piece of shit just get a diamond back shipped in from america and uv got a toolbelt for life, im from england too wear it everyday doin roofs studs plasterboard everything. nice to see u finally got an estwing tho its a joke when a joiner has a shit hammer, estwings are old news now tho everyone who swings a hammer is moving to stilleto or martinez now, titanium is the way saves ur elbows
@jrsuk1170
Жыл бұрын
You can get Diamondback tool belts and Martinez hammers from TF tools in the UK. Shipping is about 2 days 👍
@amwartwork
5 ай бұрын
it just gets ridiculous the amount of tools you have stuck to you. you cant get into tight spaces with those on.
@garng3217
11 ай бұрын
With all this weight , you can't walk anymore, how are you going to work? Lol
@MrAidanfleming
Жыл бұрын
That belt is hideous!! Looks so DIY. Get a snickers tool vest, miles nicer!!
Пікірлер: 54