Please dont stop making videos! My dream job is to be in your position and tutorials like this are super helpfull to understand everything in a practical way.
@CamWhiteLights
9 ай бұрын
Glad you’re finding my videos helpful. Just keep working hard and enjoy what you’re passionate about. 🙏
@eddyspx6186
9 ай бұрын
Thank you so much for presentation! Even people dont want share anything about it.. Thank you so much for your support! This style videos always opening people mind and you really did it well!! God bless you mate!
@CamWhiteLights
9 ай бұрын
Thankyou mate 🙏🙏
@thomasmould3710
9 ай бұрын
Ha, about the 10 minute mark I was like this all feels very familiar... Then you said Dutchy and it all made sense! it's definitely clean!
@CamWhiteLights
9 ай бұрын
😂. Had to give dutchy the credit. Made my life way easier using the DMX>Artnet.
@jakebylsma7641
8 ай бұрын
Thanks for the shout out!
@CamWhiteLights
8 ай бұрын
Thanks for the great idea.💡
@MrFlowers923
8 ай бұрын
It's a very kind explanatory video. 😄
@CamWhiteLights
8 ай бұрын
🙏 Thankyou
@maxthealternative6160
2 ай бұрын
👊👊👊👍
@CamWhiteLights
2 ай бұрын
👊🏻🙌🏻
@manmachinemusic
8 ай бұрын
Great demonstration mate! Thank you for this.💻
@CamWhiteLights
8 ай бұрын
Thankyou 🙏😊
@DJGarrettEbs
9 ай бұрын
Sick to understand how the timecode works. With Deadmau5 talking about how everything is pre programmed, it is to a point, but its all being triggered. Currently learning MA3 and have been trying to understand how some of the network stuff is triggered. thanks for the video!
@CamWhiteLights
9 ай бұрын
Agreed, I think you can only prepare so much. We’ve never run a pre recorded set & never will. Hard enough to keep to the 90+ song set list we have Time coded so far. I need to start working on MA3 too, big jump but I’ll do it some day 😂
@DJGarrettEbs
9 ай бұрын
I will be screwed if we have to go backwards to ma2. Couple venues have them built in so not looking forward to that. haha @@CamWhiteLights
@odugbesanadeniyiisrael6442
8 ай бұрын
@@CamWhiteLights please i need training
@CamWhiteLights
8 ай бұрын
What do you need help with?
@odugbesanadeniyiisrael6442
8 ай бұрын
@@CamWhiteLights i need help in my mixing and designing please 🙏 can I get ur email or any chatting contact so that we can chat better please
@fredrikjohansson8882
6 ай бұрын
I see you got Dave on your arm ❤ Good man
@CamWhiteLights
6 ай бұрын
I sure do, dave is the Man 👌🏼
@realifejon
8 ай бұрын
Amazing video - hugely in depth and great explanations. Got my sub! Thanks!!
@CamWhiteLights
8 ай бұрын
Thankyou, glad you enjoyed.
@sambalarezo7497
9 ай бұрын
Very helpful 🙏
@CamWhiteLights
9 ай бұрын
Glad you enjoyed
@vvgolf1630
9 ай бұрын
Love ur videos. Is there any time to show us how u build a tc track ? And maybe in more detail how the transition in tc between to tracks are working ? Thx :)
@CamWhiteLights
9 ай бұрын
Process of building a TC track is definitely on the list of video’s to be done. Glad you enjoyed the content 🙏
@suminyuriy5002
9 ай бұрын
super!
@CamWhiteLights
9 ай бұрын
Thanks 🙏
@VJMorph
9 ай бұрын
Great video mate
@CamWhiteLights
9 ай бұрын
Thanks mate
@tonykritikos2659
9 ай бұрын
👑
@CamWhiteLights
9 ай бұрын
🙏
@dsandoval1100
9 ай бұрын
working to achieve it 💪
@CamWhiteLights
9 ай бұрын
Keep working hard 🫡🥳
@DustinLohr-xe5jj
5 ай бұрын
Such a great video! Could you explain how your song macros are setup? How they prep timecode, your sequence, etc?
@CamWhiteLights
4 ай бұрын
I’ll look at doing a video on this when I get back home. Thank you for your message
@imark7777777
9 ай бұрын
Cool. I don't know if that DMX Artnet adapter supports POE but you could replace that switch with a POE switch and that would be one less power cord if it does. It's really a nice way around to isolate your control network from the venue Nettwerk.
@CamWhiteLights
9 ай бұрын
This Enttech box isn’t the Poe version. I considered changing but I decided to continue with it. “If it’s not broken, don’t fix” 😂😂 definitely is a great way to have a private network and avoid house/festival networks
@m.p.7617
6 ай бұрын
Hey Cam, great video! Are you open to sharing what your section in your artists Rider looks like?
@CamWhiteLights
6 ай бұрын
Hey, Thankyou. The link below is our full touring rider. www.dropbox.com/sh/9yn9yha76nhqpxd/AADV82I7eiSN7H8lQcRiNsBia?dl=0
@JosePaHD
5 ай бұрын
Hello, very good video, I have a question, is there a way not to use pioneer that is cheaper, greetings
@CamWhiteLights
5 ай бұрын
You can use Reaper. It is a cheap option kzitem.info/news/bejne/pLCQ1maKnZqlhWUsi=uEHfgjSkPDW-YmKy
@Rhys_Official
9 ай бұрын
This is really interesting. I'm an LD myself on MA3 (mode 2), all the shows I do are busking only. So its quite interesting to see how timecoded shows are generally done. Do you prefer timecode over busking or? You got my subscription anyway. Keep up the good work. Maybe some day we'll come across each other.
@CamWhiteLights
9 ай бұрын
I began only doing busking, but since I’ve been touring I can’t be busking while running Lighting, Video, Cameras & SFX. I do busk occasionally with brand new tracks we are testing, but only a few tracks in the show. Thankyou for the Sub, hope to catch you around someday 🙏😊
@fullupfinish12
9 ай бұрын
@@CamWhiteLights I appreciate the humility and willingness to share! Thanks so much for your videos!
@scipioklausen3128
9 ай бұрын
Great video! How do you know when to swich the timecode source? For example when the DJ is doing a transition where 2 songs are playing at the same time for a while how do you decide where to take the timecode from? Or do you do busking while the transitions?
@CamWhiteLights
9 ай бұрын
Thankyou. I might do a more in depth Timecode switching video. But it is fairly simple. Showcontrol allows 2 layers, I have one playing and other is standby with the next song. I switch when suits the song. Timecode tracks just take over each other using LTP priority. Sorry if that doesn’t make complete sense. Video coming soon 😂🥳
@DylanMonteiro1
9 ай бұрын
Are there any resources you could personally recommend on how to start learning all this hardware? Did you use courses or like learn from a mentor or anything? Is it even possible to learn without owning the hardware yourself?
@CamWhiteLights
9 ай бұрын
Honestly most of my learning was done on MA2PC (Free download), also watching lots of Christian Jackson’s & other MA Lighting videos. Not courses or study, just trial and error. Mostly everyone I know learnt without the hardware, costs a lot of $$ to buy. Hope this reply helped.
@FUXProductions
9 ай бұрын
Great Video once again How long did it take you to make all those TC Tracks/Shows
@CamWhiteLights
9 ай бұрын
Thankyou. So far been making them for 2 years whenever a song is added. Before I knew it we have basically 90-100 tc tracks
@FUXProductions
9 ай бұрын
@@CamWhiteLights not bad Would take forever to do a complete show rather then one song by another
@HM-Lighting
2 ай бұрын
question, did you buy your own console, and if you did how long did it take you to save up to buy one. as i want to freelance but I dont know how to get the home to buy a console
@CamWhiteLights
2 ай бұрын
Hey, I haven’t bought my own console. I use MA2 onPC +Wysiwyg to program. Only have consoles if I hire or I’m at shows that provide. You definitely don’t need one to learn or tour. I find it’s best to become competent with minimal hardware.
Пікірлер: 62