I just love the sound of a 12v with a manual. Keep up the good work and stay safe out there.
@pmarcus911
4 жыл бұрын
When you wave at someone and they don’t wave back 😂 what kind of neighborhood are you in 🤦🏾♂️🤣 I can relate to that so much it’s crazy🤷🏾♂️
@mikestrucks
4 жыл бұрын
She looks cool and gets the job done ✅
@rockingkvideos3160
4 жыл бұрын
Always nice to see the 98 working it, love that truck. Thanks for sharing Sam👍🏻👍🏻👍🏻🇺🇸
@therealfredwardbenson7295
4 жыл бұрын
Keep Up the Great Content Never Give Up Especially YT you've made It so far man Im stoked, Shock, and Happy
@geraldkoth654
4 жыл бұрын
I have an edge and set the exhaust gas to 450 before the engine will shut off. I can turn it off and take the key out but it runs until the temp drops. Keeps from coking the turbo. So far so good.
@classicrestoration
4 жыл бұрын
On my 95 12v w/48RH, stock plate, the wheel slightly turned up and a needle valve on the wastegate vac line. Max boost and EGTs are 20# and 1100f. It works fine for me. I have an 06 2500 as well but unless I’m heavy hauling, I prefer driving the 12v.
@MSTrishRN
4 жыл бұрын
Congratulations! You have exceeded 50+ subscriber's!
@stevenl9584
4 жыл бұрын
Seeing that soot fly towing reminds me of me last week haha. Took a load of logs to the mulch company the next town over, they’re up a pretty steep grade, not thinking I grabbed 3rd when I probably should have stayed a little lower haha we were blacking out all the yards going up that hill lol
@campbellz9328
4 жыл бұрын
Like the hat “ well Dale yeah”
@nichuver2863
4 жыл бұрын
Got my v belt and son trucker hat. Possibly the best hat i have bought in the last year. Absolutely love it!!
@oldcroneysgarage9739
4 жыл бұрын
i love the content with the old dodges
@jakewaters5563
4 жыл бұрын
Funny I just found your videos and knew you were in the Nevada county area just from the scenery. You almost drove by my parents house in this one 😂😂
@outdoorswithlarryrobin
4 жыл бұрын
Phatshaft turbo upgrade made mine a dream towing machine
@georgeenriquez612
4 жыл бұрын
I spy a Great Northern flatbed for grandma’s truck👍🏼😂
@SUBI_PaT
4 жыл бұрын
Love the o’l girl!!!! Nicely done man
@matt72991
4 жыл бұрын
now you just need an exhaust brake on the 12v. got one on mine and use ALL the time, empty or pulling
@andybaker5787
4 жыл бұрын
Keep up the good work Sam
@narenzonorris9053
4 жыл бұрын
Sam it sounds amazing when you’re towing. Really thinking about making mine a 6speed.
@alanack67
4 жыл бұрын
Best thing i ever did was g56 my 98 12v
@BrianNavalinsky
4 жыл бұрын
Damn that trailer is short!
@therealfredwardbenson7295
4 жыл бұрын
CONGRATS MY DUDE 50K SUBS
@therealfredwardbenson7295
4 жыл бұрын
#50Kanniversary
@VBELTandSON
4 жыл бұрын
Thank you! Much appreciated 🤘🏻
@clintonknight8897
4 жыл бұрын
He’ll yea get er done love ur channel
@bronsonpullen7922
4 жыл бұрын
94 with an untouched fuel system slowly building a plan to wake it up some.
@96dodgeram
4 жыл бұрын
Ohhhh my .... I miss my 96 after seeing this. Should have kept her.
@LoneWolf-cf5tp
4 жыл бұрын
Cool video. Love hearing the 12 v. Gotta love those shoes Lmao 😂. Well at least their not pink. 😂😂😂
@richardpeterson4738
4 жыл бұрын
Running a custom ground fuel plate in my 97, with 343 thousand, and she makes over 40 pounds of boost👌🏼
@josh33025
4 жыл бұрын
Tinted windows aren't stupid if you like them. My windows feelings just got hurt.
@VBELTandSON
4 жыл бұрын
Mine are like black paper covering them. Can’t see anything. #overkill
@_valve-wl4sg
4 жыл бұрын
No plate in my 95 and custom ground plate in my 98, amazing difference
@jamesbass6083
3 ай бұрын
I have a 94. So I can just remove the plate from it?
@gabesnyder5747
4 жыл бұрын
Keep er goin bud👍🏻
@28cruzin
4 жыл бұрын
I really enjoy your videos. Just a couple comments..... We need to see more V-Belt action. That is, if he'll let you. LOL. Second, of all the mods you do I have yet to see any turbo mods. I know there is a wastegate mod comming. I may have missed any other. I installed a "Wicked Wheel ll" a few years ago and it improved my low end a great deal on my 6.0 Ford. I have a pair of 12 valves in my boat that I haven't done yet because it will involve about $2k in propellor mods. Not only did the lowend improve but my fuel milage improved.Have you tried one? They are about $230 delivered. They may give you one to try and comment on. I've installed 3 of them now and each truck has improved. Glad to see Grandma's truck starting to take shape. See you in the next one. Dave
@JeremiahHartmanPhotography
4 жыл бұрын
Nice! Glad to see that truck running good. wait....where was our pep talk at the end of the video??
@jeffthomas6158
4 жыл бұрын
I love towing with my 6 speed sounds so good under a load
@sprucegoose1016
4 жыл бұрын
You got one rly nice unit bud 😎👌
@MrRickLG
4 жыл бұрын
Good stuff, keep it up!
@danielritchey3738
3 жыл бұрын
Nice hat
@cumminschevy5275
4 жыл бұрын
Love that cummins intro
@farmboydiesel4569
4 жыл бұрын
No fuel plate with afc live, waste gate unhooked, 025 delivery valves, and 4K gov springs
@jeffwilliams4676
3 жыл бұрын
Great video
@jessename7849
4 жыл бұрын
Now modify, get the right strength spring for your boost psi, & adjust /tune the AFC. 😉 You probably could have gotten all the fuel you needed by just doing that & sliding the stock/ existing fuel playe fully forward (it's just a max stop in that position with #0 & #100 plates. Not much less with other plates.) The afc is where nearly all the fuel control is.😉😎
@VBELTandSON
4 жыл бұрын
Hmm stock plate forward is like a little tickle of extra power. 0 is way more fun.
@johnmorris9507
4 жыл бұрын
Hey Sam are we going to see the green truck out and about soon ??? Keep up the video’s m8
@cltitus
4 жыл бұрын
Just going to say must be nice being in a smog free county :D
@herculesinwyoming
4 жыл бұрын
Superb!
@alanack67
4 жыл бұрын
I think the G56 really attributes to low egts... so many gears its hard to lug it. My stock 94 has higher egts than my 98 with factory stick shift trucks "215hp" injectors #10 plate.
@VBELTandSON
4 жыл бұрын
My 96 was the same egts with a 5 speed.
@LionHeart0808
4 жыл бұрын
Cut off the Greg A Truck (3rd Gen Black Laramie) LOL. I like watching Greg A channel and V-Belt channel so it's funny hearing youtubers mention other youtubers that you watch.
@oldreliable303
4 жыл бұрын
Funny i tow up to about 15,000 with my 94 f150, 300 l6 tuned up to about 225 hp. My 65 f600 ive had 30,000 or more behind it, 330 ft block, 165 hp at 3,600 rpms. You can tow any more but you can go alot faster.
@thomasdesmond2248
4 жыл бұрын
Technically you needed a red flag in the back of the brush hog. Could've used one of your red shoes. Lol God bless
@hunterfrosch6995
4 жыл бұрын
Have you announced the giveaway winner yet
@bparkinson1234
4 жыл бұрын
Thanks for still doing the videos after all this time....
@marcushert2759
4 жыл бұрын
My 24V cruises over 600 haha. Doesn’t get much above 1350 though. Not too bad for 6X.011 injectors and a K27
@michaelparker9886
4 жыл бұрын
Looks like when I haul my 30 hp tractor on my 16 ft tilt deck but I only have a half ton ram 1500 with the 4.7
@BuckInchuteranch1
4 жыл бұрын
Well Dale yea she works good, 🤣
@mattleonard5268
3 жыл бұрын
When I got my 95 12v it had no fuel plate at all and I drove it like that for while til last week when I put a 100 fuel plate in it which is one step down from a 0
@tannerb55
4 жыл бұрын
Why buy a 0 plate? Grinder is free and plate just needs thrown in the trash. Run a k27 turbo with pdd 5x012 inj nozzles put 055 delivery valves advance timing to 16 with no head studs and have a bad as truck it will pull like crazy.
@VBELTandSON
4 жыл бұрын
Had an 8 in it. I wanted it for other project.
@tannerb55
4 жыл бұрын
Do you have gov springs in it yet
@hunterprowsemrereviews9141
4 жыл бұрын
Hot shot challenge with the ol 12 valve lol
@nicholaslewis9037
4 жыл бұрын
I like you green one more then your red one but love the 5500
@hotshotfx3502
4 жыл бұрын
Goodstuff 👍
@elpoison626
3 жыл бұрын
Hey don’t know if you have already but check out the glow shift gauges got some on my 07 Ram
@brianherron5400
4 жыл бұрын
Just Ole cruiser
@TooTallharley
4 жыл бұрын
I have shown you my custom fuel plate. about ready to do some more to it to get some more out of her.
@craigburgeson421
4 жыл бұрын
It looks like you got a Bradford built bed
@trevorm7013
4 жыл бұрын
Sooooo are first comments no longer a thing or can I say it?
@kunu98
4 жыл бұрын
9:53, another second gen made an appearance
@VBELTandSON
4 жыл бұрын
On a taco run it looks like
@stuartgibson1896
4 жыл бұрын
V-Belt and Son, Looking good with the 12v! Do you know anyone thats done a 68re delete?
@steele_moto932
4 жыл бұрын
I’m running a #10 plate in my 97 factory 5 speed 12 v pinched of waste gate 32 psi of boost and 18 degrees of timing. She gets a bit hot if you let her have it 😂
@anythingwithplanes
3 жыл бұрын
I just did a zero on my 95 manual. I guess I’ll need gauges sooner then later.
@rudychacon7175
3 жыл бұрын
I cant decide between a 0 or 10 🤨
@samuelcampbell6330
4 жыл бұрын
Nice 12v Sam. I'm having a hard time finding a used p pump for a fummins I am working on and I was wondering if you would be interested in selling the one off of grandma's old engine. Thank you for your time!!
@greendodge98
4 жыл бұрын
No fuel plate with AFC LIVE!!!!!
@VBELTandSON
4 жыл бұрын
More money lol
@greendodge98
4 жыл бұрын
@@VBELTandSON Worth every penny
@jmax6614
4 жыл бұрын
Crank that star wheel all the way, you should be getting 30psi
@VBELTandSON
4 жыл бұрын
It’s been cranked for months
@timothydare6007
3 жыл бұрын
I have a 98 12 valve. I want a 5 spd for her. Want to convert over. From the Auto. Someday.
@thomasdesmond2248
4 жыл бұрын
Yeah letting your turbo cool down will make it last a lot longer.
@foryouuugamingcoalition7110
2 жыл бұрын
So i'm wanting to get into hotshotting, really 2 or 3 car hauler, or power only some random shit. Any opinions on rocking a 97 cummins? downside it is a 2500 with 5 speed, prolly need an axle swap.4x4. other options out there tho
@trevorvollstedt1642
4 жыл бұрын
For a wastegate what I did was use a trampoline spring instead of the actuator. Then you can adjust it.
@chadkirby4888
3 жыл бұрын
Great video!!! I have a similar truck, but an automatic. Do you put the zero plate in the stock position? Or did you slide it forward a bit?
@VBELTandSON
3 жыл бұрын
All the way forward
@sstein49
4 жыл бұрын
I wish you would send me the brand name of that yellow trailer or the dealership y’all bought it, I really really like the size and configuration of it
@VBELTandSON
4 жыл бұрын
I wouldn’t send business their way for anything. Only promote ppl who have honor and care about their costumers. I’d say Buy a 16ft full tilt deck from diamond c 🤘🏻🤘🏻that be same size as yellow trailer but way better
@mrhotdog1968
4 жыл бұрын
Great videos. What size tires are on the 98 ?
@cdpperformance2613
Жыл бұрын
I have a 96 ram 3500 12v cummins I’ve redone head gasket, head studs , 60lbs valve springs k27 turbo , exhaust manifold 4k gsk , put haven’t touched timing are afc housing does it seem to work really good? Is it worth doing?
@jomoma5301
4 жыл бұрын
Could you do a video with the 04?
@VBELTandSON
4 жыл бұрын
Done several but what you looking for?
@jayg479
4 жыл бұрын
Trailer burnout lol
@jomoma5301
4 жыл бұрын
@@VBELTandSON comparing the 04 towing vs the 98 12 valve with the same trailer. Compare egt's boost that sort of thing and power. Basically old VS New... I think that would be really cool
@latashafreeman563
4 жыл бұрын
Opinions on the 4BT Cummins?
@VBELTandSON
4 жыл бұрын
Little savage. Have 4 machines powered by 4bt
@jayh8490
4 жыл бұрын
ive got a 2012 ram 2500 but with the hemi... how hard do you think it would be to put a cummins in it? or not worth it
@miz942
4 жыл бұрын
0 plate in my 215. egts dont stay cool like yours. Is there a reason to go with a banks wastegate rather than an adjustable boost elbow?
@VBELTandSON
4 жыл бұрын
I want banks gate because my old truck had it. Worked great
@williamatkinson4324
4 жыл бұрын
What aftermarket clutch do you run in your 5500?
@kingair1954
4 жыл бұрын
Do you delete any of your trucks?
@jamesgavi4653
3 жыл бұрын
let me build your pump ... keep your holset and your exhaust manifold change lines and injectors and give Me that pump
@Wlai01988
4 жыл бұрын
Where is the green truck?
@VBELTandSON
4 жыл бұрын
Tomorrow’s video
@rydernichols3846
2 жыл бұрын
could someone post the link to where you can but a 0 fuel plate? looking for one for my 1997 lol right now i just took my fuel plate out and she runs
@VBELTandSON
2 жыл бұрын
Look on Amazon
@adamalburg5711
2 жыл бұрын
What brand bumper is on this?
@stefanoferri1485
4 жыл бұрын
can you cummins swap my chevy gasser!? she gets it done.
@wtfracing811
4 жыл бұрын
12:15 why engine temp so warm?
@VBELTandSON
4 жыл бұрын
Pulling hard. Hot day
@IManOPERATOR
4 жыл бұрын
Pshhhhhh 10k ain’t nothing on my 24v 😂
@farmboydiesel4569
4 жыл бұрын
Wouldn’t be for the 12 valve if the waste gate was pinched off
@VBELTandSON
4 жыл бұрын
Pop an ol turbski boot off. That’s my old style of waste gate
@IManOPERATOR
4 жыл бұрын
HillsideMechanics how do you pinch off a waste gate? Vise grips?
@IManOPERATOR
4 жыл бұрын
V-BELT and SON the ultimate turbo flutter plus smoke screen 🙌🏼
@trevor3173
4 жыл бұрын
Do u have a discord?
@VBELTandSON
4 жыл бұрын
A what?
@trevor3173
4 жыл бұрын
Discord it's a group were u can talk to everbody that joins. It's an app on android and I think apple
Пікірлер: 123