Sponsor & Any Good Stuff 影片裡的好東西在下方連結 Go check out 4UAD new Arrival !! 【4UAD 相關商品在下方連結↓↓↓】 store.4uadsmartairsoft.com/ Special Thanks: ➤ GHK Glock 17 Gen5 here : samoon.com.tw/ ➤ACETECH: you guys do make some amazing Grenades and Tracers Amazing Grenades : amzn.to/3EFsI2W Bifrost Tracers : amzn.to/3us9Xhs Official Web: www.acetk.com/ ➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!! Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
@jasonong2571
Ай бұрын
跟 Dcg Ghk 合作推出金色扳机,造福我们动手能力差的玩家!
@JedociderShou
Ай бұрын
Now I want a GHK glock 😍
@JedociderShou
Ай бұрын
Broooo. I just found out your hop rubbers are available here in the Philippines! Imma get one for my ugly hi capa frankenstein lmao.
Ive been using 4UAD Products in my customer builds, and im a big fan of your lubricating pens and buckings. You guys make us airsoft tech shots very happy!
@4UADSmartAirsoft
Ай бұрын
Thanks man that really means quite a bit to us! We will keep them coming to you guys
@szf1350
Ай бұрын
Thank you for making this video. Never own one but i certainly enjoy seeing you do this video. 👍🏾
I have to say, now that I have both the Gen 3 and this Gen 5 MOS version, I feel Gen 3 was more sturdy. I purchased mine with a steel slide and outer barrel, and adaptor plates. However, the steel slide seems noticeably lighter than the Gen 3. There is also a lot of play between the slide and frame. The rails on the Gen. 3 and steel slide were a lot tighter (better tolerance?). The recoil spring assembly is a lot weaker than the Gen 3 and the Gen 5 hop up unit seems cheaper than the old version. I have a steel barrel lock, 4UAD bucking and hop up unit preordered so I hope it'll be better. The mushy trigger is lighter but like your video illustrated, it has a lot of slack, so I will probably have to get the upgraded trigger. Interesting to note is the slide rails match the real steel so I'm able to use a real steel MGW sight adjustment tool on this airsoft model. However, I believe the dimensions are still a bit off because the AmeriGlo rear sight I put on has a noticeable gap between the slide and the metal rear sight even after tightening the sight with the included screw. The polymer frame also looks a bit rough and the bottom of the flaired magwell has sharp edges and when I tried to install real interchangeable grips, they didn't fit. The grip angle is slightly different than the real one 🤷♂️. The flaired magwell is also more square-ish and not as rounded as the real one. Lastly, the adapter plates are a cool idea but the included screws are extremely small and I almost stripped one of them trying to install the #2 sight plate. I have a Holosun SCS but I realized I can't mount it because the sight doesn't require a sight plate and screws directly onto the slide. Unfortunately, to maximize the efficiency of the gas nozzle, the MOS plate once removed, shows a slide that isn't flush, so I can't mount the sight. FYI, the size and thread of the MOS plate screws are not the same as the real steel ones. All in all, I think the Gen 3 is better quality and it's cheaper than this MOS version. I'd recommend waiting to purchase this after a few more batches have been made. I noticed the newer Gen 3 polymer frames have slight changes than the original ones that first came out. For example, you can see the difference in the front set of slide rails from the original batch to the ones being made now. The polymer also looks rough and not rounded and smooth on the inside around the recoil assembly area, unlike the Gen 3. I think this will all get better over time, so this might just be because it's a new item with a new mold.
@4UADSmartAirsoft
22 күн бұрын
Now this is some valuable comment :DDD Thanks the info man
@user-wc7jq5eu7z
14 күн бұрын
@@4UADSmartAirsoftThanks! Question: does your steel recoil spring feel weaker than the one on the Gen.3 and does your Gen.5 have a lot of play between the slide and rails? My slide sometimes doesn't reset fully to the forward position.
@TurkishBenAirsoft
Ай бұрын
Ordered your hop unit today from Samoon. Waiting for trigger to be available
@4UADSmartAirsoft
22 күн бұрын
Thanks for the wait man! Really appreciated!
@LilBurdJJ
Ай бұрын
How much in total? the pistol and the upgraded kit combined.
@enricodelosreyes4246
6 күн бұрын
Is the upgrade is available in all glock gbb guns? Planning to have the same upgrade with my WE Glock34. Thanks team 4UAD
@4UADSmartAirsoft
2 күн бұрын
only the trigger will work, the hop won't
@patrickdomingo7973
Ай бұрын
B E A Utiful.
@4UADSmartAirsoft
Ай бұрын
Let’s go
@YEK-airsoft
Ай бұрын
今天早上才買了這支glock 現在就看到補品了 希望快點到達香港 速到速買
@4UADSmartAirsoft
Ай бұрын
8/20發貨等我們
@YEK-airsoft
Ай бұрын
@@4UADSmartAirsoft 如果8/20等不到 我去跳樓了😂😂
@simonstokes369
Ай бұрын
Can you make a new trigger that looks like original stock trigger. I like the utilitarian look of glocks and feel fancy parts ruin that aesthetic
@4UADSmartAirsoft
Ай бұрын
hummmm wonder who will buy it XD
@user-vu5no4lx5m
Ай бұрын
扳機很漂亮 雖然價格稍高但還是會想改
@user-ge5lq3jr7z
Ай бұрын
Hey Guys, when is the pre-order going live on your site? Cheers 👌🔥
@4UADSmartAirsoft
Ай бұрын
By the end of this month :)
@04801377a
Ай бұрын
I have gen 3, Samoon Co2 kit installed, I dry fried a lot and the trigger have become so weak to open the co2 mag valve, hope this trigger could fix it
@4UADSmartAirsoft
Ай бұрын
It will! The problem is caused by the spring, when the spring gets old all kinds of problems starts to occur
@simonstokes369
Ай бұрын
Why use old v 1 tension arm?? Just change pin in the v2 tension arm spring to a longer pin. Reducing the rolling break and premature valve knocker movement.
@4UADSmartAirsoft
Ай бұрын
Yep and we switch that in the last moment
@perlenbacher6788
Ай бұрын
Please, also make the MOS plates in steel. The standard ones are very soft material and easy to strip.
@4UADSmartAirsoft
Ай бұрын
Let me put that to our list
@AlanChen973
23 күн бұрын
And please please make a holosun k-footprint plate!
@-D2B
Ай бұрын
👍. Ambiance musicale top🤙
@flintbackwoods1416
Ай бұрын
A love story
@4UADSmartAirsoft
Ай бұрын
Indeed
@residents_evil242
Ай бұрын
You guys reply to comments a lot, hoping you reply to mine. I wish to acquire the most impactful Glock in the market, recoil wise, doesn't matter the cost nor the generation. What do you recommend? GHK Gen 3 with Steel Slide + Upgrade kit for CO2? Or GHK Gen 5 + Steel Slide (Is this even for sale anywhere?) + Upgrade kit for CO2 (Which I guess would be the Steel Slide + the package of upgrade parts shown in this video?)? The Gen 5 is new and thus, information on upgrade parts, and comparisons to gen 3, is hard to come by. Props for the amazing videos! Hope I'm able to support you guys soon by buying your upgrade products : )
@4UADSmartAirsoft
Ай бұрын
once you get the Co2 mag gen 3 and gen5 feels roughly the same, but with RMR it kicks even harder since its heavier
@MidWestJigga
Ай бұрын
Fantastic I’ll be purchasing!
@ArmandD
Ай бұрын
Great video! Could it be possible to get a rough idea as to what would be the benefits of installing this lovely looking aftermarket trigger?
@4UADSmartAirsoft
Ай бұрын
easier trigger pull, and adjustable travel, better look
@marksmoker9827
Ай бұрын
Hey guys, love the content. Quick question: I have a gen 3 ghk, and I need a trigger upgrade. I know that there is already a samoon improved trigger out there (I think it's that silver sear shape that was changed), so I'm wondering if you guys are using the old sear, the samoon improved one, or a completely new one. Thanks!
@4UADSmartAirsoft
Ай бұрын
The improved one eventually
@MrTryAnotherOne
Ай бұрын
Nice 'ballistic curve'
@4UADSmartAirsoft
Ай бұрын
Lol he’ll yah hahah
@doogiehong
Ай бұрын
My wallet is ready
@4UADSmartAirsoft
Ай бұрын
We will be ready for you!
@disruptiveairsoft
Ай бұрын
Can somebody make a glock 19 slide and frame for GHK please 😫 How many years we gotta wait
@WRenGames
6 күн бұрын
do u guys take order and do shipment fully assembly i dont have enough knowledge for upgrading
@4UADSmartAirsoft
2 күн бұрын
sorry man we are really short on hands
@WRenGames
2 күн бұрын
@@4UADSmartAirsoft ah unlucky then can u guys do glock x23 i guess it was like i am bas with names
@Mclarenxx
Ай бұрын
我喜歡BGM
@4UADSmartAirsoft
Ай бұрын
需要舒服
@nepdere821
Ай бұрын
What steel slide is that? Are you guys making a steel slide for the glock gen 5?
@4UADSmartAirsoft
Ай бұрын
nope that is from battleforged
@marionelouisrosal4374
Ай бұрын
whats that electric crew drill?
@leeverink32
Ай бұрын
Another one.
@TurkishBenAirsoft
Ай бұрын
Need that hop unit
@MrMRMATCH
Ай бұрын
jimmy沒了~ 貓也沒了~
@4UADSmartAirsoft
Ай бұрын
貓咪帶去廠房應該會嚇瘋哈哈哈
@MrMRMATCH
Ай бұрын
@@4UADSmartAirsoft 是因為廠房有別的人?(69小隊)
@khoadang7645
Ай бұрын
Is Ghk Glock 17 gen 5 steel version customized by Samoon’s recoil stronger compared to the Ghk Glock 17 gen3 ?
@4UADSmartAirsoft
Ай бұрын
They kicked equally hard
@philmak5830
Ай бұрын
Friction Pro rubber do have the tendencies to make the bbs fly low then back up, i wonder why
@4UADSmartAirsoft
Ай бұрын
its the shooting angle and the filming angle
@johnchien7859
22 күн бұрын
Could you do a recoil comparison between the GHK M4 DD PDW and the Marui M4 with the Volante 20mm steel bolt carrier? (I can lend you for testing)
@4UADSmartAirsoft
22 күн бұрын
That might take a little to long we will buy the carrier if we can
@johnchien7859
22 күн бұрын
@@4UADSmartAirsoftman, the Volante carrier took me 15 months 😂 finallly will get it by next Monday, I really don’t mind if you wanna try/test it coz I love ur videos a lot. BTW I’m in Taipei
@TurkishBenAirsoft
Ай бұрын
I need one of those oil dispensers. What steel slides that? I've got the gen 3 and my gen 5 arrived today
@4UADSmartAirsoft
Ай бұрын
Sweeet man the slide came from a brand call battleforged
@DiscJockey007
Ай бұрын
А кто производитель стального затвора и стального ствола? GHK the best🔥
@4UADSmartAirsoft
Ай бұрын
It’s a workshop called battleforge armament
@user-po4sj5gy7q
Ай бұрын
請問內管也是換改裝的精密管嗎?是什麼品牌的?長度97mm?謝謝 還有這些開賣了嗎(重點)!
@4UADSmartAirsoft
Ай бұрын
內管是gen3 的原廠管喔
@witherfoot2634
6 күн бұрын
Will your custom flag trigger work on the VFC glocks?
@4UADSmartAirsoft
2 күн бұрын
Yes sir it fits
@a-ten3517
Ай бұрын
12:51 Which company is the Inner Barrel that was installed with the hop-up chamber? We're running out of Inner Barrel information
@4UADSmartAirsoft
Ай бұрын
Oh that’s actually stock barrel from a gen 3
@kingchaos6050
Ай бұрын
You just sold a lot of GHK Glocks sir!
@4UADSmartAirsoft
Ай бұрын
Thanks man that mean quite a lot to us
@KatanaKatana1100
Ай бұрын
like like like
@Forcastx
Ай бұрын
wonder if I real trigger group and slide would fit.
@4UADSmartAirsoft
22 күн бұрын
I wonder too lol
@user-ho1jw3qf5n
Ай бұрын
Hop-Up座 KRYTAC Maxim 9 適用嗎? 我還在等那個10萬點閱~
@4UADSmartAirsoft
Ай бұрын
哈哈哈哈應該是等不到了XD Hop座確定不通用XDD
@soulsigma9352
Ай бұрын
Will you release some upgrade sig air m17??
@miko3350
Ай бұрын
Will this triangle trigger work on the glock17 gen 3 version??! I wanted to put it on the DSG GHK G34 TTI
@Sixmmcustom
Ай бұрын
@@miko3350 Yes, it’s working on the Gen 3/5 and also on the VFC Glock!!!
@miko3350
Ай бұрын
@@Sixmmcustom Wow! how did you know this information?
@Sixmmcustom
Ай бұрын
@@miko3350 From 4UAD Airsoft;-)
@rabbitpeter869
Ай бұрын
😍😍😍
@martinliptak8311
Ай бұрын
Great job! Are the triggers compatible with gen3 or is there any chance that you will release trigger for gen3 as well? Thx
@4UADSmartAirsoft
Ай бұрын
This one works on gen 3 :)
@martinliptak8311
Ай бұрын
@@4UADSmartAirsoft amazing, so now I can't wait! When it will be possible to order it?
@kevinendella
Ай бұрын
Does the steel slide is custom made? Or it was officially made by GHK?
@4UADSmartAirsoft
Ай бұрын
Batttleforged
@felipeleon9273
Ай бұрын
Nice video guys. I have two questions: 1- is the hopup chamber also compatible with GHK gen 3 glock? 2- is the steel slide made by 4uantum?
@keyboardcommando5146
Ай бұрын
Probably no to both, but definitely no to number 2!
@felipeleon9273
Ай бұрын
@@keyboardcommando5146 thank you!
@4UADSmartAirsoft
Ай бұрын
1. Nope but the trigger is 2. Steel Slide is made by battleforged
all these upgrade parts, is it only for ghk g17 gen 5??? I myself am using a vfc 19x.... can i install in it???
@4UADSmartAirsoft
Ай бұрын
The trigger works haha
@kuan529
Ай бұрын
@@4UADSmartAirsoft can the trigger also be installed on ghk Gen3 ?
@nooneplayer
24 күн бұрын
which inner barrel works with the hop-up chamber?
@4UADSmartAirsoft
22 күн бұрын
Marui Spec
@TurkishBenAirsoft
Ай бұрын
Do you know the size of the rmr plate screws? I only got 2 in the box.
@4UADSmartAirsoft
Ай бұрын
M3
@danielchang3955
Ай бұрын
請問鋼滑套如何購買,會有成槍?
@ferdinandgarcia2183
4 күн бұрын
How to order that kind of unit
@4UADSmartAirsoft
2 күн бұрын
Check out our website
@edindawagie3312
Ай бұрын
The Hopup unit and trigger fits also gen 3?
@4UADSmartAirsoft
Ай бұрын
Only the trigger not the hop
@HurricaneSonic
Ай бұрын
SHUT UP AND TAKE MY MONEY !!!
@chavittoy5411
Ай бұрын
Is that steel slide aftermarket? Or does it come with the GBB PIstol?
@keyboardcommando5146
Ай бұрын
Aftermarket
@4UADSmartAirsoft
Ай бұрын
Aftermarket
@dennisshongi199
Ай бұрын
fps? thanks
@Airsoft_Nomad
Ай бұрын
where can i pre order 🤔🤔🤔
@tofusfcxhim
23 күн бұрын
這扳機能支援 DCG-GHK-TTI-G34-MOS 嗎?
@4UADSmartAirsoft
22 күн бұрын
這禮拜天看片
@user-th9eg6sh8l
Ай бұрын
可以出款竞技滑套
@4UADSmartAirsoft
Ай бұрын
比賽專用!!!
@Ethan003whatsup
Ай бұрын
Trigger 几时发售,一定买
@4UADSmartAirsoft
Ай бұрын
8/20
@issacwong9138
Ай бұрын
一套共要多少錢?
@lanunmuo6879
Ай бұрын
How much if you do all this upgrades plus the ghk g17 gen 5. ?😊
@4UADSmartAirsoft
Ай бұрын
Gonna cost a bit haha
@Dinghowx
Ай бұрын
这次的gen5 mos通真铁规格吗 真品 螺丝直接上吗
@4UADSmartAirsoft
Ай бұрын
要看ㄝ每家都不一樣
@user-zw1xq9pp4s
Ай бұрын
請問您們的hop座能原廠管嗎、還是兼容什麼管謝謝
@4UADSmartAirsoft
Ай бұрын
原廠還是可以裝喔那段主要是要表示原廠管小特規
@gos0401
Ай бұрын
Is Steel Slide a BFA product?
@pandashit7023
Ай бұрын
you know too much😏
@user-mq9on2iz5w
Ай бұрын
Can this upgrade be use on WE brand?
@4UADSmartAirsoft
Ай бұрын
The trigger yes! The Hop up nope
@AlanChen973
Ай бұрын
12:42 請問這裡是表示 Gen 5 的內管長度與 Gen 3 不同嗎?不是 97mm 了?
@4UADSmartAirsoft
Ай бұрын
差不多長不過就是規格不是正馬牌要注意
@wilson01131
Ай бұрын
請問會推出全升級的成槍嗎?
@4UADSmartAirsoft
Ай бұрын
目前沒規劃ㄝ可能要購買DLC 了
@phale426
Ай бұрын
Is the barrel threaded?
@4UADSmartAirsoft
Ай бұрын
Nope
@charlie.gustafsson
Ай бұрын
Does it have the same kick as the gen 3?
@4UADSmartAirsoft
Ай бұрын
With Rmr it kicks harder
@andersnoren6070
Ай бұрын
Is the bucking compatible with the gen 5 inner barrel?
@4UADSmartAirsoft
Ай бұрын
not the best since the inner barrel is proprietary
@andersnoren6070
Ай бұрын
@@4UADSmartAirsoft Gotcha! I placed a preorder with Samoon before I got round asking about it here. I'm gonna try to add a gen3-barrel to the order. Cheers for the reply 🫡
@Slaughter619
18 күн бұрын
Does your new trigger change the pull weight significantly?
Пікірлер: 236