Amazing. This is exactly the guide I needed. I would've hated pulling the entire bumper off like 99% of the videos I've seen say to do. Much appreciated for the vodeo
@gregn4541
2 жыл бұрын
Holy crap! I just gotta say thank you. Like others have mentioned, every other tutorial on how to remove the valance required removing the whole front bumper. This process literally took 5 minutes. Thank you!
@tundra_24
4 ай бұрын
Best valance video! Can’t thank you enough.
@NotSure479
4 ай бұрын
This was very helpful, appreciate the vid…for those also trying this. I was able to take off a majority of the clips from the top side. TRD pro skid plate makes it a little tight.
@mickellaknapp6192
2 жыл бұрын
This was super helpful! Thank you for making this video. Was just what I needed to remove the valence on my 2022 TRD off-road.
@bb_8_us
2 жыл бұрын
You are the MAN! My goodness every video is how to modify the SR5 and I have the ORP.
@songforthesea
2 жыл бұрын
Just watched your video and pulled my valance off with no problem. I had it dipped in carbon fiber look. Install was a breeze. Thanks for the video, good job. I’m 69 so if I can do it anyone can.
@keithmoore9623
3 жыл бұрын
Thank you for posting this!! Saved me a lot of time by not having to remove the entire bumper to replace my valence! Good stuff!
@Greghook
6 ай бұрын
Best guide for valance removal on KZitem.
@justme_2020
5 ай бұрын
You make it look 10x easier than it was for me. About 2 hours later and two cut up hands and wrists, I did finally manage to get the old one off and a new black one on from 4Runner Lifestyle. Because it is an aftermarket part, the tabs on the one from 4Runner Lifestyle require some bending and cursing to get them to line up with the slots in the bumper, but I finally got it on there, with no clips left over. Anyone doing this should be comfortable working on clips that you can only feel. You cannot see a number of them, especially the ones at the bottom and the two at the outer ends. You just have to do it by feel. I also had to use a screwdriver to press the tab on each one to get almost all of them out and to get several back in. It would be very hard to do with just fingers.
@jaws2858
3 жыл бұрын
Dude! This is what I’m talking about! KZitem jackpot when I wasn’t looking. Thank you.
@K_oa
3 жыл бұрын
glad it helped!
@georgetramountanas8244
2 жыл бұрын
Exactly what I needed to watch, perfect video guide, thank you
@dustinkeough3630
3 жыл бұрын
Thanks for the help! I was about to take my whole bumper off until I saw your vid! I was able to get it done! Although I have to admit you made it look way easier then it was for me! lol Took me about a half hour The top corner clips were a bit tough to reach for me. All in all way better then removing the bumper!
@zorttaco4503
3 жыл бұрын
Thanks. I’m in my driveway 9pm the night before a day trip. Doing last minute “mods”
@digitaldestination5264
2 жыл бұрын
Thank you for making a quick and to the point video. Cheers!
@joeythedime1838
2 жыл бұрын
Great video - I just did my the front valance on my 22' TRD ORP. A couple of clips required super strong thumbs to push them down! Now on to the rear --- unfortunately I do not believe there is a hack for them.
@MrGPlays
11 ай бұрын
Watched like 5 of these vids you are the best one. Thanks for going through each damn clip.
@rcapilli
5 ай бұрын
Thanks man. That was very helpful and I've watched a few videos. Very well done.
@davewang8175
3 жыл бұрын
If you pop the hood, and remove the radiator cover, you can access 8 (6 tops/2 middle) of the clips even easier. Then you only have to do the 4 bottom clips, and the last top clip on the passenger side.
@calvinkang1224
4 ай бұрын
Thanks for uploading this video, but I have to say everyone is built differently, its 10x harder than this for me. I don't have a big hand and pretty flexible btw.
@Marksum
3 жыл бұрын
Surprised this is the only vid showing how to do this. Props to you! About to try this in a few minutes lol
@odbt1071
11 ай бұрын
and 2 years later Marksum's old valance is held on by those two clips he couldn't get off
@zalllon
Жыл бұрын
This needs more likes. Great overview.
@stephenfarris9799
Ай бұрын
awesome.. worked like a champ.. Thank you
@kzsun6538
9 ай бұрын
Thank you This is exactly the guide I needed
@andrewward4246
Жыл бұрын
i was able to do this today! thanks I really did not want to take the rear bumper off
@MrGTravels
Жыл бұрын
wait you did the rear bumper without removing the whole bumper? I know you can do the front but the rear?
@andrewward4246
Жыл бұрын
no you do have to take the rear off I think I mistyped... I ended up plastidipping mine because It was cheaper and easier@@MrGTravels
@jackvang87
3 жыл бұрын
Appreciate this video bro! This is definifely more difficult if you have sausage fingers and large forearms but I was still able to manage nonetheless.
@denuzzioa
2 жыл бұрын
Good vid. Very helpful and descriptive. Did you do the rear?
@JAClown
2 жыл бұрын
I believe you can do the rear by dropping the spare tire. I've seen a video of it done but can't seem to find it again.
@Member_1115
4 жыл бұрын
Great video... now out I go to give this a try. Thanks for the "how-to"!!! 😉👍
@K_oa
4 жыл бұрын
glad it helped.
@tonyqv136
2 жыл бұрын
Thanks! This is exactly the guide I needed.
@xaviervidal7815
2 жыл бұрын
Very helpful. Appreciate you making this video guide 👍
@samambrosio2022
4 жыл бұрын
Did you do the back one too?
@vegas.freund
3 жыл бұрын
Great Video. You make it look so eazy cheezy!
@raulzambrano8569
3 жыл бұрын
I made a few scuffs on my bumper just by taking it off to remove the valance… doing this instead! Thanks
@davedoesstuff9975
4 жыл бұрын
Very nice and helpful thanks!
@Agent_Lunicorn
2 жыл бұрын
Thank you! Worked like a charm. And I have meat paws for hands. If I can do it, anyone can.
@Andrew_Vu
2 жыл бұрын
saved me so much time.
@PowderKegSoCal
Жыл бұрын
Great job, well done!
@flipmode9236
3 жыл бұрын
Badass. Exactly what I was wondering
@sboukhris1980
2 жыл бұрын
Very helpful video, thank you!
@yuzibo5717
Жыл бұрын
Amazing video. we have the Front and Rear lower Valance for 4Runner, would you like to test it?
@JE-rw8tm
2 жыл бұрын
How about the rear bumper valance. Figured out the cheat code for that one?
@motiOn732
4 жыл бұрын
Thanks man. Worked great for me
@teachthestory
2 жыл бұрын
Super helpful. Thank you.
@cottycruz
2 жыл бұрын
Thank you so much! very helpful
@76honda76
2 жыл бұрын
Good stuff bro.
@MsDstarr
14 күн бұрын
Thank you so much for this. Where did you get the hood deflector from?
@K_oa
14 күн бұрын
@@MsDstarr its AVS i got it on amazon
@MsDstarr
13 күн бұрын
@@K_oa thank you so much!
@BRock86
3 жыл бұрын
Awesome vid, thanx man! 👍
@ecualuis90
3 жыл бұрын
Nice I wanna see the final outcome!!!!
@eatdirtnetwork
2 жыл бұрын
Great video. 👍
@pacrib
3 жыл бұрын
Real nice job !
@richardstough4297
3 жыл бұрын
Perfect.Thanks!
@jasons7175
3 жыл бұрын
This helps a lot, thanks! I plasti-dipped mine already, but thinking I want to spray paint it now after watching this. Did you also remove the back one?
@K_oa
3 жыл бұрын
I did not. I left it silver.
@katyrogers
3 жыл бұрын
Did you ever do your rear one? Curious if it is a simple as the front looks. I definitely want rid of the silver!
@christiansaavedra3926
Жыл бұрын
Can you upload a picture of the valance after it was wrapped !
@Jaico2024trd
4 жыл бұрын
Great video! Man you made it look so easy! Question could send me the link the the black front grill? Thank you.
@K_oa
4 жыл бұрын
TacoVinyl on Instagram
@WCS-xp9lu
4 жыл бұрын
Thank you a bunch
@IBRAKEFORBEDROCK
10 ай бұрын
I just did this, and it was a son of a B&%ch ....Doing the back bumper was easier even though it was more involved
@Meowhsss
3 жыл бұрын
There are 7 on the top, 2 in the middle on the sides, and 4 on the bottom: Total of 13
@speedbird3955
3 жыл бұрын
Nice...... thanks
@mrillmakeit
2 жыл бұрын
Perfect
@armourbl
2 ай бұрын
What did you wrap it with specifically and how much did it cost to have done?
@K_oa
2 ай бұрын
@@armourbl just regular 3m gloss black vinyl wrap. Cost me $250 for valance and grille
@stevemiao3068
3 жыл бұрын
Do you happen to know the touch up paint code for that silver piece on the bumper? Thanks.
@odbt1071
11 ай бұрын
What?
@lloydmiranda44
3 жыл бұрын
Thanks for the video. Where did you buy the grill?
@K_oa
3 жыл бұрын
Tacovinyl
@wileybrown3733
3 жыл бұрын
Great video, but the “easy to remove” valance pop clips are nearly impossible for me to remove. Any tips?
@K_oa
3 жыл бұрын
what problem are you having with them?
@jasons7175
3 жыл бұрын
I had a hard time too with some of the clips, but I used a plastic pry tool to help push some of the tabs down.
@prmike333
10 ай бұрын
Can you do the same for the rear bumper
@K_oa
10 ай бұрын
rear bumper has to be removed for the rear valance, unfortunately.
@rand0mGT
8 ай бұрын
Drive it over a river crossing and you’ll move that no problem!
@kevinannebuck570
3 жыл бұрын
Hi. Where did you get the bug deflector and how is it working out. Thanks
@K_oa
3 жыл бұрын
On amazon they are called Auto Ventshade 25053 Bugflector. I mainly have it to keep rocks from chipping the front of the hood.
@Yoyomanmanholla
7 ай бұрын
Silver looks way better than black
@kevinbetters
3 жыл бұрын
Can black OEM replacement valances be purchased (front and rear), rather than dip or wrap?
@1Kellapitter
3 жыл бұрын
Yes, I'm having mine installed by Toyota as I write this
@JoseMartinez-og2pb
2 жыл бұрын
What about the back piece?
@jnov10
Жыл бұрын
Does anyone know if this method works with the factory skid plate installed?
@HPG3035
2 жыл бұрын
Is this procedure doable on a 2021 off road premium? I got 11 clips off, could not feel the one located on the driver side near the fog light. Valance was still secured on the top corners somewhere on both sides.
@HPG3035
2 жыл бұрын
I'll also note that mine has KDSS if that makes a difference.
@K_oa
2 жыл бұрын
@@HPG3035 it should be exactly the same as my 2020. You might just have to feel around a bit more
@paulriccardi4871
2 жыл бұрын
What did you do about the rear bumper valance??
@K_oa
2 жыл бұрын
nothing yet but will wrap it soon
@ericramirez3663
2 жыл бұрын
do they sell that black cover for 4 runner sr5 ? and does it just snap on or so I have to remove the grill?
@K_oa
2 жыл бұрын
which black cover? if you are talking about the black middle area you then any model would fit. TacoVinyl has them
@phamdavis
4 жыл бұрын
For the blank trd grille did you cut the bottom to fit around the sensor or was it just like that?
@K_oa
4 жыл бұрын
I cut it with a dremel to fit the TSS. You wont notice it if you measure how much to cut off.
@piciullok
4 жыл бұрын
I cut mine with a razor blade, the plastic is soft enough, and the cut was super smooth.
@RedDevilTuning
3 жыл бұрын
Can you do this for the rear valance?
@K_oa
3 жыл бұрын
For the rear you have to remove the bumper.
@Patrick5
4 жыл бұрын
Did you paint it and put it back?
@K_oa
4 жыл бұрын
wrapped
@yuyasuzuki720
4 жыл бұрын
Can we do it on the rear bumper too?
@K_oa
4 жыл бұрын
for the rear no. You have to remove bumper for that, but it is a lot easier.
@esi178y6
4 жыл бұрын
Where did you purchase the blank trd grill?
@K_oa
4 жыл бұрын
tacovinyl
@statjams01
4 жыл бұрын
Did that top black grill interfere with the TSS?
@K_oa
4 жыл бұрын
i cut out a slot under that you cant see you fit the TSS
@carbonking53
4 жыл бұрын
The TSS radar sensor is located more in the center of the TSS panel. It does not fill the panel edge to edge.
Пікірлер: 112