Hello, I am the owner of 4runner in South Korea I maintain and manage videos on you. Thank you for the perfect video
@VikingsGarage
Жыл бұрын
Thank you 🙏🏻
@_madpanda
Жыл бұрын
starting and ending the vid with a coffee, that's how we do it. thanks for the tutorial
@VikingsGarage
Жыл бұрын
Right on!! 🤘🏻
@mrspongegaming5173
9 ай бұрын
I love your videos man, they’re always easy to follow and quick to the point. It’s very hard nowadays to find decent installation videos especially with wiring. I have a 18 TRD OR Premium that I’m going to add these raptor lights in thanks to your video. I’ve definitely watched a lot of your content and will continue. Thanks! Forever subscribed.
@VikingsGarage
9 ай бұрын
Much appreciated!! 🙏🏻
@bronzestarvue
8 ай бұрын
How would you wire up the switch if you didn't use a relay, and they weren't going thru the fuse box, but battery positive? The LED lights don't draw a lot of power, so the fuse on the switch should be enough (I'll put an inline fuse between the switch and battery just in case)? So if you have the red and black wires coming off the lights, with the red / black / yellow / green wires off the switch, which ones would go where? I know one switch wire has to go back to battery positive, one to ground, and one to illuminate the switch, but which ones, and what do you do with the "leftover" wire?
@SandyMasquith
Жыл бұрын
Very nice! Thanks for taking the time to make this video. Forgive the stupid question please: Did you replace the engine compartment fuse with the one inside the cab?
@VikingsGarage
Жыл бұрын
No such thing as stupid question… the engine compartment fuse has to go back in, only fuse your installing the add a fuse is on the inside fuse box (IGN No 2)
@joeythedime1838
Жыл бұрын
Any reason why you used a relay? The 3 Raptor leds can't draw hardly any current. You should be able wire from the interior fuse block to the switch and go directly from the switch to the leds.
@VikingsGarage
Жыл бұрын
This is very true, but it’s better to be safe then sorry. Besides it’s super easy to add it to the circuit. (What I showed everyone is an automotive circuit the way your car comes from factory) And yes I could have ran the power source from the engine bay, but I much rather keep that fuse box completely closed to the elements. 😉
@Bobby_86415
8 ай бұрын
For the add a fuse did you locate the power side or just install it? Because a add a fuse needs to be oriented correctly for proper functionally. Thanks
@rob4f258
Жыл бұрын
Bro...this video came right in time. Thankz 👍🏾
@VikingsGarage
Жыл бұрын
Your welcome!!
@yvesjean2992
5 ай бұрын
Thanks for the video I have the same raptor light to install with a switch on my 4Runner TRD pro 2023. but it's come with a 15 AMP fuse to put at the ignition in the fuse box. when I put just the 10 AMP fuse come with the car the engine don't want to start at all. I put both 15 and 10 AMP the raptor light and the engin work very well. Should I leave it with the 15 AMP or buy a 10 AMP? I waiting for your advice.
@VikingsGarage
5 ай бұрын
Are you using the correct fuse… either way never increase the amperage on a circuits fuse ( that could cause an electrical fire).
@Thankyou_3
Жыл бұрын
Thanks buddy for the video, I need to get believing bigger to do this install on my Runner. By the way, I love the postlude music, is that music something you made yourself or off the shelf music.
@VikingsGarage
Жыл бұрын
You can totally do it yourself. Not that hard. That’s music I find on the video editor. I should make my own music, I do own a few guitars. Happy 4th of July!!
@cpfb68
Жыл бұрын
Awesome vid and easy to follow thanks! Quick question, did I miss the video where you got the Raptor lights? Where did you pick them up? Please keep up the great work!
@VikingsGarage
Жыл бұрын
YotaVerse the link is in the description 😉
@cpfb68
Жыл бұрын
@@VikingsGarage thanks…I missed it. We got the same spec 23’ version 4Runner as you in classic silver. Love this vehicle! Never had a body on frame and the Mrs. Is really happy as am I. Keep up the great vids. I’ve Ben watching to be able to do all the maintenance. Thanks for all you do!
@VikingsGarage
Жыл бұрын
@cpfb68 very cool!! I appreciate you!! 🙏🏻
@Treetopflyer777
Жыл бұрын
Great video. I’ve been looking forward to this one. Electrical is definitely not my forté
@VikingsGarage
Жыл бұрын
Believe me, I’m not a fan either. If I can do it so can you.
@robsavphotography
9 ай бұрын
Thanks for a great video. How bright are the Raptor Lights ? Are they just for looks or do they really light up the road ? Thanks !
@VikingsGarage
9 ай бұрын
They don’t necessarily light up the road. But definitely let other distracted drivers know that you’re coming. 🤘🏻
@robsavphotography
9 ай бұрын
Great. Thanks !@@VikingsGarage
@shadyss96
8 ай бұрын
Thanks Viking!
@VikingsGarage
8 ай бұрын
👍🏻
@elshowdelpape4445
Жыл бұрын
Hola....I wanna lift my 2021 4runnerSR5 what you recommend me
@VikingsGarage
Жыл бұрын
It all depends on your goals for it… a lot of options out there. 🤷🏼♂️
@richardstone5241
Жыл бұрын
I used to build off road vehicles and do not recommend lifting. If you do decide to lift your 4Runner don't go over two inches if you don't want issues. Personally, and yes I have a 4Runner, your money is better spent on a quality "steel" set of under armor and rock sliders.
@4RunRun-USA
10 ай бұрын
Thank you for creating this video outlining how to install my raptor light switch! Please, let me know if you plan to install any other switches and I'll be happy to ship them out for free! Again, thanks for the great tutorial. @VikingsGarage
@VikingsGarage
10 ай бұрын
You’re very welcome!! I appreciate your support!! Reach out to me on Instagram and let’s talk, what switches do you have available?
@cali963
8 ай бұрын
I noticed the wiring harness in the description is a 2 lead harness. Looks like you only used one for the raptor lights. What did you do with the other lead?
@VikingsGarage
8 ай бұрын
???
@spud6603
8 ай бұрын
Okay so I attempted to install my raptor lights except I chose to keep the red power wire on my battery terminal and just feed the relay wires thru my fire wall, "disappointed" in my install because it won't turn on. I know I did something wrong but I just don't know what it is. It's passed my bed time so I will test the fuse on the relay in the morning, because I also have to install my ditch lights.
@VikingsGarage
8 ай бұрын
Good luck!! 👍🏻
@Treetopflyer777
Жыл бұрын
I guess the inside fuse panel cover can’t be reinstalled with that plug in place?
@VikingsGarage
Жыл бұрын
That’s the one downside of it.
@TopHatGent
5 ай бұрын
Would you recommend caulking the seams of the raptor lights? My cali raised didn't make it two months before it got moisture inside so now I am in talks with them to send a replacement.
@VikingsGarage
5 ай бұрын
Yeah, it’s a shame but, extra measures are needed to get these things to last.
@CarlosR.Rivera-s1x
11 ай бұрын
I did the connection just like you did it, I got power on the connector of the switch but the switch is not working. I used the provided switch that came with the wires and it turned on the lights. But the raptor switch is not working. Is there a chance that it came defective? How I could diagnose the switch it self?
@VikingsGarage
11 ай бұрын
remove it from the dash and try again, they are know for binding. Not exact OEM fit.
@victorcianflone5093
6 ай бұрын
It seems to me if you're only using a 2 Amp Fuse on the inline fuse holder, those lights don't draw hardly anything why go through all the trouble using a relay
@VikingsGarage
6 ай бұрын
Because I can, and because you should. 😎
@victorcianflone5093
6 ай бұрын
@@VikingsGarage it takes less than 1 amp to activate a relay, it makes no sense to use the relay when the lights only draw 1.5 amps
@VikingsGarage
6 ай бұрын
@victorcianflone5093 You seem to be very bothered by it, how would you feel if I insisted in telling you what to do? Regardless of your answer? Thank you for watching!
@atldeadhead
Жыл бұрын
Nice t-shirt!
@VikingsGarage
Жыл бұрын
🤘🏻
@spud6603
8 ай бұрын
Why does it ave to go specifically into the IGN No2 fuse port, and can't I use another 10 A fuse location?
@VikingsGarage
8 ай бұрын
Sure, you can pick another one. That’s the one I picked. 😉
@chachi5975
8 ай бұрын
You'll want to use one that only comes on with the ignition. I used an add a fuse on the cigarette lighter circuit.
@JoshuaCaldwellDirector
Жыл бұрын
So, I installed everything exactly like you did. However, the Raptor switch never lit up. For a few cycles it turned the Raptor lights on and then off, but then that stopped working as well. Assuming I did everything exactly like you, is it possible I blew a fuse? Or just got a bad switch? The switch itself feels insanely cheap and the green connector that plugs into the switch was a pain to get in and then ended up breaking the switch when I tried to get it out (this was after I realized the switched wasn't working). And did you solder the red and yellow together first and then solder to the white one? Did you do one at a time? Thinking this may have been my fail point even though it looked good.
@VikingsGarage
Жыл бұрын
The switch fitment on the dash slot was a bit tricky, only fitted right once I wrapped it around some electrical tape. I solder those 3 wires together… double check your fuses. 🤷🏼♂️
@JoshuaCaldwellDirector
Жыл бұрын
@@VikingsGarage yeah, I was testing the switch before installed it into the dash. The switch light never worked and it only seemed to cycle the lights a couple times and then stopped. Giving it another try today. Thanks!
@JoshuaCaldwellDirector
Жыл бұрын
Got it to work. I think I just had a faulty switch.
@VikingsGarage
Жыл бұрын
@JoshuaCaldwellDirector I’m glad to hear, they need to work on making a better quality switch and connector.
@bigdogcam1
10 ай бұрын
@@JoshuaCaldwellDirector i am experiencing your same issue. lights work via switch but switch doesnt illuminate. I emailed 4RunRun to get another switch sent out..... time will tell here
@nogazaky2915
11 ай бұрын
Hi , so can I hook anything to get pour on/off like front camera ?
@jeffhenjes1722
Жыл бұрын
Does anyone make a good raptor light? All I've seen up close are cheap and wouldn't last in the offroad world long.
@VikingsGarage
Жыл бұрын
I do have to admit, being on My second set(first ones were cheap in every sense of the word) This set is from Yotaverse, it’s an improvement but I’m sure there as to be better out there.
@mariabarreiro9884
Жыл бұрын
Good Job filho bjs 😘 ❤️ ❤️ dos teus pais Maria e César 💞
@VikingsGarage
Жыл бұрын
Beijinhos para vocês!!
@mariabarreiro9884
Жыл бұрын
Nice Job 👏👏 👏 beijinhos 😘❤️
@VikingsGarage
Жыл бұрын
Obrigado mãe!!
@jj4996
6 ай бұрын
Where in NJ are you?
@VikingsGarage
6 ай бұрын
Who’s asking?
@jj4996
6 ай бұрын
@@VikingsGarage just me , I’m in Monmouth County. Great videos. I just got a TDR Pro
@VikingsGarage
6 ай бұрын
@jj4996 No worries, Congratulations!! I’m currently working in Empire Auto mall Located in Greenbrook NJ
@e90_austin
Жыл бұрын
Why wouldn’t you just wire the lights to come on with the headlamps? Or with the vehicle on?
@VikingsGarage
Жыл бұрын
Did you not watch the whole video… because I want the ability to turn them off as I please.
@e90_austin
Жыл бұрын
@@VikingsGarage defeats the purpose of having them.
@lvvelili
Жыл бұрын
Hello. Do you have interest in testing our Toyota 4 Runner product? If so, please give me your email.
Пікірлер: 74