I had a health issue about 4 weeks ago and coming home after a doctor visit about a week later I noticed the engine running very hot. When I popped the hood after arriving home I realized the water pump was definitely shot. I got online and ordered a replacement pump and then started checking the web on replacement videos. I came across your youtube video and ended up watching it several times before attempting to change the pump. I'm an aircraft mechanic by trade so mechanics don't scare me too much. Last Saturday, the 1st of June, I decided to change the thing. When I started it felt like I had done this before due to the fact that your video was so detailed and precise I tackled the job in about 5hrs start to finish with not a single hiccup. I just wanted to thank you for taking the time and effort to produce a tutorial like this and I will be looking for anything else you might have for any other faux pas I might encounter with my Avalon. Thank You ever so much, Tom
@hardlymovingpro
5 жыл бұрын
That's great news Tom! Wonderful success story on the water pump replacement. The videos we produce on the Avalon, Camry and Lexus ES can be cross referenced (via playlist) if using the same engine (i.e. 2 GR-FE). The playlist is "Toyota Camry / Avalon / ES300". Thanks for your support!
@throwaway2082
2 ай бұрын
Any tips I may attempt this
@jhfjhfkf
2 жыл бұрын
this video is gold for avalon repairs, have not found much material with great instructions and camera work, really great job
@hardlymovingpro
2 жыл бұрын
Glad you liked it!
@kennethscioneaux8000
3 жыл бұрын
Excellent video. No gaps in work done. And good explanation of what’s being done and what’s about to be done.
@hardlymovingpro
3 жыл бұрын
Thanks!
@ralphnav8654
3 жыл бұрын
I have the same engine. Wow! Didn’t realize what it took to change the water pump. I just recently changed the spark plugs and that was challenging. Maybe Toyota and other males should seriously consider make areas of space to at least get some important tools in those tight places. Great job! You’re a pro.
@hardlymovingpro
3 жыл бұрын
Thanks!
@idanko731
7 ай бұрын
This is a great video but,....Just a heads up for anyone trying to do this. You are not going to this with a 78 piece wrench and socket set from homedepot, you are going to need the right tools. That means many of the same sockets in long and short and different drives, some specialty tools like the chain clamp where not all chain clamps work. Some chains are too thick to slip in between the power steering pulley and the water pump pulley requiring a screw driver to hold the water pump pulley in place instead while breaking loose the bolts. Pliers to remove clamps, etc. If you have a Serpentine belt tool kit, the thin bar can act as a breaker with a deep socket to break loose some of the harder to reach bolts. To get the second bolt off the mount on the drivers side you will need a 17mm deep socket and an extension. Don't take it out completely. There are some things that have been edited out like the two water pump bolts by the power steering pulley which are very difficult to remove without the right sockets and ratchet. Remember this video is edited and there are some small things that can pose problems that may have been skipped over. If you are at all mechanically inclined than you should be able to get through this with some small inconveniences. Be prepared to spend a lot more time then it took in the video, this guy makes it look easy because he knows what he is doing. As a suggestion, get every size socket mentioned in 3/8 and 1/4 inch deep and shallow. Get some long box end ratchet wrenches at least in 10,12,14 at a minimum. Having a slim ratchet head with long handle will help also.
@hardlymovingpro
7 ай бұрын
Thanks for sharing! You're right. Tools are everything to either make the job possible or easier. Another way of removing the water pump pulley is to snap torque the 10mm nuts with the accessory belt on using a box wrench. They're only torqued on at around 10 lbs. Then with the belt removed, you should be able to remove the nuts with your finger tips. Where I've seen price quotes of up to $1,800 to replace this water pump, it's not a bad idea to invest in some decent tools. The published video is not a formal instruction video but rather a general guide. People who ask me for torque specs and more detail should use this video with a vehicle specific repair manual.
@donqdow2
5 жыл бұрын
Awesome video! The dealer quoted me $900 to replace the pump and belt. Another said $700. I googled for video help and a really bad one convinced me NOT TO DO IT!! But your video is well laid out so I have it a shot. New pump was $124, belt, $15 and I bought $80 in tools. It was a little hectic and I ended up with 2 leftover bolts when finished?? (The dread of anyone who's ever worked on cars) But I backtracked and found the problems. Car is up and running great. Thanks a lot!!!
@hardlymovingpro
5 жыл бұрын
Great to hear that you did it yourself and save by big $$$. To support our channel, give us a thumbs up and to get notifications of new videos, please subscribe.
@toanlam8603
Ай бұрын
How do you lift the engine up? Last time I jack it up by the oil pan and it bent. I don’t want an engine crane if it can be avoided
@hardlymovingpro
Ай бұрын
Place a square wooden block between the jack and the pan. The block will spread the lift as to not bend the pan.
@thomasrayborn3177
5 жыл бұрын
Excellent video... thank you for taking the time to make it and share it! The water pump on my 2007 Avalon with 193,000 miles just started making noise and leaking. While it is quite I job, it's still do-able! A couple of questions. While you are changing the water pump, would you recommend changing the idler pulleys and tensioner pulley? Or if they go out later, can you get to them without raising the engine. ALSO, is a serpentine belt removal tool (in you link) necessary? Thanks!
@hardlymovingpro
5 жыл бұрын
Glad you found this video useful. With 200k miles on the accessory belt pulleys, it may be a good idea to replace them. Unfortunately there's 3 of them and they're not cheap. The third pulley (to the left of the water pump pulley) may be difficult to remove without slightly lifting the engine. The serpentine belt removal tool will give you the torque leverage to relieve the tension on the belt tensioner as well as let you get into that tight location. Help support our channel by hitting the thumbs up and get notifications of new videos by subscribing ... thanks!
@postinfinity
Жыл бұрын
Thanks so much for this, it was great. I just changed my 2007 Avalon water pump and it was a breeze thanks to this video. LOL my Haynes manual said you had to take out the engine to do it. You covered everything, and very well!
@hardlymovingpro
Жыл бұрын
Thanks! Glad it worked out for you!
@michaeljohnson4079
2 жыл бұрын
This was a great video and really provided a step by step. I don’t let anyone really work on my cars and I really was not sure how I was gonna tackle this one cause the manual didn’t offer much.
@hardlymovingpro
2 жыл бұрын
Glad you liked it!
@malcolmmcdowell8589
5 жыл бұрын
My friend this was a great great great video. I swear you solidified my decision NOT to change my Water Pump. I no longer have this much patience to work on Japanese cars.
@hardlymovingpro
5 жыл бұрын
I hear ya ... but things are not getting any easier working on ANY specific make or model car. See what's involved in replacing the water pump on a V6 transversely mounted engine inside a GMC SUV. The GMC V6 is a timing chain driven engine and you'd be lucky if the timing chain cover doesn't leak before reaching 100k miles. Resealing the cover is around a 6 hour job. And you'd be lucky if the timing chains last past 200k miles. That's a little under 10 hrs labor, around $500 + in parts ... so you're looking at over a $2000 repair.
@hardlymovingpro
5 жыл бұрын
I hear you! It's getting tougher and tougher to do your own repairs much less diagnose the cause of a problem.
@JDMHaze
4 жыл бұрын
its surprisingly easier in the GS/IS350 V6"lol
@ruiwu3604
3 жыл бұрын
Me too , I feel the same , hard to do that much now
@maycuervo
3 жыл бұрын
Japanese cars are the easiest to work on.
@kwangnam9993
2 жыл бұрын
I don't even have a Toyota Avalon but really enjoyed this video. Learn a trick or two every time I watch a great mechanic do their magic. Thanks!
@hardlymovingpro
2 жыл бұрын
Glad you enjoyed it!
@ryanwashere21
Жыл бұрын
This helped a lot. Had to do this twice because the thermostat o ring took a shit and I had several missing bolts. Manage to get them all in. Bleeding the system of air was something. Now I know not to take a water pump for on a Toyota no time soon
@hardlymovingpro
Жыл бұрын
thanks for sharing!
@Jaafar-vlogs
4 жыл бұрын
hello I have 2006 Toyota Avalon with 190,000 mi how long and I have to change the water pump ?
@hardlymovingpro
4 жыл бұрын
If you've gone over 150,000 mi without it failing, consider yourself fortunate. On the V6 GR-FE engine, they tend to fail at around 100,000 mi.
@elgatogordo9523
5 жыл бұрын
I have a feeling I’ll be doing this job on the Mother in Law’s Avalon pretty soon since I watched this video. She has 265k miles on her 2008 Avalon and just recently replaced an alternator. Thanks for the great video 👍 It’ll make my wife and in M-law very happy and my life easier when I tackle this task...
@hardlymovingpro
5 жыл бұрын
Good luck with the job! If you have any questions, let me know!
@elgatogordo9523
5 жыл бұрын
@@hardlymovingpro Thanks...Subscribed for more of your informative videos 👍
@jrokuzdakid7776
2 жыл бұрын
Good mechanic horrible teacher 👎🏾
@hardlymovingpro
2 жыл бұрын
There's always that 5 percent.
@oceanhu7176
2 жыл бұрын
Were you loosening the center engine mount nut around 1:37?
@oceanhu7176
2 жыл бұрын
Never mind, got the answer at 10:45, it's the front motor mount
@tryssulli
Жыл бұрын
I called a shop near me and they quoted me an ungodly amount of money to replace the water pump on my 2012 ES350, the Avalon is basically the same car. They tried saying sometimes the engine has to be pulled out, I thought the idea of that was crazy. Seemed like a way to charge me more hours for labor. I can get am oem water pump off eBay for $150 and just do it myself. I’ve replaced the alternator already along with a few other things already, I feel like I can be up to the task of doing this thanks to your detailed video. Hopefully I’ll be successful. 🙏
@hardlymovingpro
Жыл бұрын
Good luck with the repair and let's us know how it worked out!
@jpeterson1572
3 жыл бұрын
Great video!! Is it any extra time or difficulty to replace the thermostat when chasing the pump?
@hardlymovingpro
3 жыл бұрын
Not at all. You have to remove the thermostat housing assembly to get to the water pump anyway. Once the housing assembly is off, just remove the two nuts that holds the housing cover.
@miriamvivo4279
5 жыл бұрын
Thanks for your time.
@hardlymovingpro
5 жыл бұрын
No problem.
@davidpedder9048
4 жыл бұрын
Is this a 2-3 hour job ? ( How long it would take the dealer to complete the job ? )
@hardlymovingpro
4 жыл бұрын
For an experienced mechanic who've done this before, under 3 hours. For first timers, 4 + hours.
@brettstevens4989
10 ай бұрын
You are amazing. This was better than any step by ate video I’ve ever seen.
@hardlymovingpro
10 ай бұрын
Thanks!
@minhdo9597
5 жыл бұрын
Thanks for the detailed video. How do you tell the noise from the pump's bearing and idler pulley(s) or you replace them all just in case? What is the mileage of this car and how often this engine's water pump is replaced under normal driving condition? All your answers are appreciated.
@hardlymovingpro
5 жыл бұрын
140K miles. Take a long pry bar and place it next to the part that you think is making noise. Place your ear on the pry bar handle and listen for any grinding noise.
@slowerdaddy
5 жыл бұрын
I took a stethoscope, remove the end film and that end working like a sound collector. Point the end toward each pulley and you should hear the difference. Then take the sepentine belt off, spin and wiggle them by your hand sometimes you will notice grinding noise or play.
@minhdo9597
5 жыл бұрын
@@slowerdaddy thanks a lot.
@nathanielchenault3214
5 жыл бұрын
How long of a process would you say this is? I plan on changing my own on wed, or at least attempting...
@hardlymovingpro
5 жыл бұрын
Taking my time, it takes me around 3 hours.
@nathanielchenault3214
5 жыл бұрын
Just got it, no leaks. Thank you so much!!
@bonteyjuwor7228
2 жыл бұрын
I like the video keep up the good work
@hardlymovingpro
2 жыл бұрын
Thanks, will do!
@JamesHammock-g9x
Ай бұрын
Thanks for your video, l changed my wife's water pump. That was really hard to do in such a tight space, but the jacking up of the motor was the key to just a couple of valuable inches of workspace. Thanks!!!
@hardlymovingpro
Ай бұрын
Great job! Believe Toyota's repair procedure is to drop the engine.
@amirhamza922
2 жыл бұрын
طلع شغل الافالون صعب جدددااا🙈 شكلي ببيع سيارتي
@jimmorris18
Жыл бұрын
fantastic video
@hardlymovingpro
Жыл бұрын
Thanks for the visit!
@chuongchau1807
3 жыл бұрын
You're a good mechanic and conscience, but this's difficult for me. Thank you for your guidance.
@hardlymovingpro
3 жыл бұрын
You bet!
@darwinbanegas
Жыл бұрын
Hello, I have a Toyota Camry 3.5 2009. I hear metal screeching. Where is the band? Do you think it could be the water pump?
@hardlymovingpro
Жыл бұрын
Without more details, it's difficult to say. Get a free estimate at Firestone, Gateway or PepBoys.
@CharleneHeikamp
3 ай бұрын
What strap wrench did you use? I have a Toyota spanner tool that I've used on my '05 Camry water pump pulley, but that strap tool looks like the way to go,
@hardlymovingpro
3 ай бұрын
That's a vice grip locking chain strap wrench. Link to the tool should be in the text description area of this video.
@TourettesMobileMechanic
17 күн бұрын
I don’t understand why all the pumps come with a timing belt kit? Makes no sense… I don’t need timing only the pump… it’s not in the way? Any thoughts on this? Great video by the way…
@hardlymovingpro
17 күн бұрын
Don't understand? Pumps can be bought separate from the belt
@TourettesMobileMechanic
15 күн бұрын
@@hardlymovingpro I’m fairly certain and from all I have researched on this motor you have to remove the timing components to get the water pump pulley off. They sell the kit because the pump is an interior water pump? Am I wrong? Mine only has 8 bolts I believe?? It’s a 2002 Toyota Avalon. I think it’s a little different set up. I’m pretty sure you must remove the timing to get the pump off? All I have researched says that it is the case for this vehicle. However. You don’t touch the timing. Very convenient if I can do this great. I’m not sure I can but I would love to If possible. I’ll let you know soon. Direct hit and all data says no….
@hardlymovingpro
11 күн бұрын
I believe your 2002 Avalon uses Toyota's 3.3L 3MZ-FE engine which is timing belt driven. This video is for the 3.5 2GR-FE is a completely different engine using a timing chain with an external accessory belt driving water pump.
@Ravennevarr
2 жыл бұрын
Tried to help my dad, he busted the tensioner bolt adding more pain in the butt but other than that it was a helpful tip
@hardlymovingpro
2 жыл бұрын
Glad it worked out!
@aroundthewaytrucker2760
8 ай бұрын
I hear a whining noise coming from under hood, when I accelerate it gets louder. Also I saw a small amount of water under vehicle. Could it be the water pump going out?
@hardlymovingpro
8 ай бұрын
Yes, it could be if the water is red in color.
@peterking8722
4 ай бұрын
Great video with all steps laid out. I am curious, how could the engine be moved once the nut for the center mount on the passenger side was removed? Doesn't the engine have other nuts and bolts that keep it stable and from moving, e.g. near the driver side?
@hardlymovingpro
4 ай бұрын
The engine will allow passenger side lift while pivoting on the driver's side mount. With the front motor mount bolt unscrewed but not removed will keep the engine centered.
@randybillings8625
Жыл бұрын
If you'd crack the water pump pulley bolts loose while the belt was still on, you wouldn't need to mess around with that "strap wrench".
@hardlymovingpro
Жыл бұрын
You're right but doesn't work all the time.
@victorvillagomez4413
4 жыл бұрын
You make it look so easy.
@boogitybear2283
3 ай бұрын
Wow, this looks so hard to do! I guess if I watch this over and over and over, it will become easy, but actually doing this over and over makes it that way. I’m guessing I’ll just hire The Car Care Nut!😂
@hardlymovingpro
3 ай бұрын
Last quote from a Lexus dealer on doing this replacement was $1,800! Can you believe it? Takes me a little over 3 hours labor time.
@boogitybear2283
2 ай бұрын
@@hardlymovingproMan, salute to you doing this job!!
@aaronmcwilliam5191
2 жыл бұрын
Fuck wish I have found this video before fucking around with that engine control bracket as the toyota techs call it
@hardlymovingpro
2 жыл бұрын
Live and learn!
@PickyOne
3 жыл бұрын
3:50 Nice trick to remove the belt.
@hardlymovingpro
3 жыл бұрын
Thanks. Live and learn.
@robertlopez3759
2 жыл бұрын
Buy a torque wrench guys snapped a 10 mm on bottom of water pump now I’m fucked
@hardlymovingpro
2 жыл бұрын
10 mm bolts only require 7 lbs of torque. Next time use a 1/4 ratchet wrench and only apply hand torque. Depending on where the bolt sheared, you might be able to screw out the remnants of the old bolt.
@VIRGILSHELTONII
Жыл бұрын
Whats a good price to pay for labor on replacement?
@hardlymovingpro
Жыл бұрын
3.5 hours x labor rate
@ryanxu1765
8 ай бұрын
Great video! Sadly I would rather let my car die than try to replace this.
@hardlymovingpro
8 ай бұрын
Or let someone else replace it?
@stonesavage3003
4 жыл бұрын
Your channel is beyond helpful sir and definitely stands out. Thank you.
@hardlymovingpro
4 жыл бұрын
Glad you think so and thanks for your support!
@HoodsGlobal
Жыл бұрын
***I thought you are supposed to have your heater on at high while running the engine?
@hardlymovingpro
Жыл бұрын
Doesn't matter unless you're trying to clear out an air pocket.
@trentdaddydolla647
2 жыл бұрын
Do you have to remove the alternator and ac compressor to change the belt tensioner?
@hardlymovingpro
2 жыл бұрын
Don't think so. Can't say since I never had a occasion to replace one.
@samkumar8062
Жыл бұрын
Great video. However, avoid buying Gates water pump - they are crap. Buy OE.
@hardlymovingpro
Жыл бұрын
Haven't yet had a failed occurrence with a replacement Gates pump. Aisin, however, I've seen fail under 100k.
@samkumar8062
Жыл бұрын
@@hardlymovingpro I guess my mileage varied. OE lasted 120k miles, Gates failed in 30k miles. Maybe they went with a cheaper source. They make good belts though.
@user-ty2ti7fn2n
3 жыл бұрын
I was hearing sounds in the engine and after it was checked with the mechanic, he told me that the water pump must be changed and I changed it and I was surprised that the problem was not the cause 😂 Now is it good to change it anyway?
@hardlymovingpro
3 жыл бұрын
Depends on the mileage of the car. I'd replace it at around 100,000 miles. Other noise may be anything that rides on the accessory belt (pulleys, alternator, ac compressor, power steering pump bearings).
@user-ty2ti7fn2n
3 жыл бұрын
In the end, the problem was from the electrical dynamo... Few of the good specialists, mechanics or electricians, help you in solving your car's simple problems.. Thank you brother for answering our questions.
@slowgoat6089
Жыл бұрын
@@user-ty2ti7fn2n - so should i change my alternator?
@husseinalsaadi6504
2 жыл бұрын
So i want replace thrmostat for toyota avlon 2011 how where the location
@hardlymovingpro
2 жыл бұрын
Go to the 3:42 video time mark. Remove the 2 10 mm nuts on that coolant manifold I disconnected and then you'll see it.
@peaceineachsmile3871
5 жыл бұрын
hi, are the two idler pulleys exactly the same? how many idler pulleys are there? where do you buy the idler pulleys? Thank you for the detail videos! my 2006 avalon limited still makes quite loud rattling noise even after waterpump and serpentine belt replacement.
@hardlymovingpro
5 жыл бұрын
Yes ... the two (2) idler pulleys are the same; however, the tensioner pulley is slightly different.
@hardlymovingpro
5 жыл бұрын
Also, that loud rattling noise may be from a failing water pump pulley. I would not assume the idler pulleys are going bad. Easy way to tell is to remove the serpentine belt and spin the wp pulley and idler pulleys with your hand. You should be able to tell the roughness in the bearings.
@hardlymovingpro
5 жыл бұрын
A replacement idler pulley can be obtained from a Amazon link within this video description.
@peaceineachsmile3871
5 жыл бұрын
Hardly Moving Productions Thanks a ton for your answer. It helps a ton. God blesses!!!
@hardlymovingpro
5 жыл бұрын
No problem, my pleasure and good luck with the repair!
@inhocsigno9151
4 жыл бұрын
Excellent video. Thank you.
@hardlymovingpro
4 жыл бұрын
Glad you enjoyed it!
@viktorvezdenetskyi7819
5 жыл бұрын
Great video so you don't have to drain whole coolant from the system
@hardlymovingpro
5 жыл бұрын
Nope. Today's coolant technology is incredible good! They use OAT (Organic Acid Technology) coolant which only degrades if something from the outside contaminates the cooling system. I worked on a Camry V6 with over 200K miles and the coolant was still bright pink! Couldn't believe it! I'd say your radiator, hoses or water pump will give out before the coolant. So whatever drains out from the water pump replacement, just replenish it.
@freedomom123
3 жыл бұрын
شغل ممتاز👍👍
@charlesmanson4110
6 ай бұрын
Ya definitely a least a 2hr job.
@hardlymovingpro
6 ай бұрын
More like 3 + hrs.
@NativePride4051
5 жыл бұрын
Holy fuck I am not looking forward to tomorrow
@hardlymovingpro
5 жыл бұрын
Take your time doing the job. It can be done. Around 4 hrs if doing it for the 1st time. Good Luck!
@johntravolta5687
11 ай бұрын
Great video, thanks.
@hardlymovingpro
11 ай бұрын
Glad you liked it!
@cuianomundo
4 жыл бұрын
Great job mate : )
@hardlymovingpro
4 жыл бұрын
Thanks!
@snap771
4 жыл бұрын
Hardly Moving Productions hey man I have a Toyota Avalon 2004 there seems to be leakage which I’m thinking is honestly just water coming out from everything I’m seeing it may just have to do with the ac it’s right around the mid front end underneath the car it’s clearly a small pipe that seems to be dripping this is normal ? It almost looks a bit white after taking a bit of a look at it but that’s what has me worried it of course could be more Hopefully I can get a response back appreciate it
@hardlymovingpro
4 жыл бұрын
It sounds like water coming out from your ac condensation tube. Check your coolant reservoir level. Fill up if low and check later for fluid drop.
@B-S1999
3 жыл бұрын
You got a video on replacement of rear spark plugs on this car I just did mine and when I did the rear #6 when I pulled on the big wiring harness to get the coil out I pulled the 3 wires going to the camshaft sensor right below it. 3 wires are yellow,red and black but now I dont know the order they go into the connector, by chance would you know much appreciated
@hardlymovingpro
3 жыл бұрын
There are two of the same sensors. Just follow the layout of the other sensor.
@mattyv6605
3 жыл бұрын
Considering doing this myself on an 08 avalon. The wp pulley is wobbling and making noise. 170k miles with no other noticeable issues. Would it be wise to replace other items with the pump or just one at a time?
@hardlymovingpro
3 жыл бұрын
Accessory belt and maybe pulleys.
@HotdogDude101
5 ай бұрын
I just finished doing the job using your video as a guide. You did a great and thorough job in the video. Thank you very much for helping make this a possibility for a non-mechanic.
@hardlymovingpro
5 ай бұрын
Glad it helped!
@irineojimenez2090
5 ай бұрын
Very clear and precise on the instruction. I will watch this another 5 times so it will be easy to remember the procedures. Great job.
@hardlymovingpro
5 ай бұрын
Glad you enjoyed it!
@gashby8027
4 жыл бұрын
Great video! Because of your great work I’ll be doing my RX350 1 question though.. z are you using 2 jacks.. 1 to hold the car up and the another to jack the engine up from that?. I don’t wanna kill myself..
@hardlymovingpro
4 жыл бұрын
Yup ... to tilt the engine up slightly when the right front wheel is off.
@richataman
2 жыл бұрын
Nice Job! thanks for posting the video.
@hardlymovingpro
2 жыл бұрын
Thanks for watching!
@xtremlimitz101
Жыл бұрын
Great video. Thanks for telling everyone from the beginning that you must tilt the motor. Some people say to do without.
@hardlymovingpro
Жыл бұрын
You bet!
@juliusdades1426
4 жыл бұрын
Not as straight forward as I thought. No wonder it's a expensive exercise.
@hardlymovingpro
4 жыл бұрын
Was scratching my head the first time I saw this setup.
@mtang65
2 жыл бұрын
You didn’t mention anything about torque specs. Great video.
@hardlymovingpro
2 жыл бұрын
Thanks! You'll have to get them out of Haynes a repair manual or a source online.
@سالم_رمز
3 жыл бұрын
👍🏼👍🏼
@hardlymovingpro
3 жыл бұрын
Thanks!
@АлексейПирожков-я2е
4 жыл бұрын
Спасибо за очень позновательное видео!
@hardlymovingpro
3 жыл бұрын
пожалуйста
@juanitabrown545
7 ай бұрын
Where do you live,this is what I need done
@hardlymovingpro
7 ай бұрын
East of Memphis, TN
@juanitabrown545
7 ай бұрын
@@hardlymovingpro I'm in East Tenn, Grainger county
@hardlymovingpro
7 ай бұрын
Email: hardlymoving@gmail.com
@irshadyousaf2820
2 жыл бұрын
Good job thank
@hardlymovingpro
2 жыл бұрын
Welcome 👍
@robbyvanz
3 жыл бұрын
Does 70 ft/lbs sound about right for the lower engine mount bolts?
@hardlymovingpro
3 жыл бұрын
I'd say that's about right
@roadhog5384
3 жыл бұрын
Right on! Next to the coil packs & rubber oil line… this is the 3rd biggest problem with the 2GR-FE. If you have 150K and haven’t done this, do it! Preventative maintenance.
@hardlymovingpro
3 жыл бұрын
You got it! PM is the way to go! That's why planes aren't falling out of the sky.
@condor5635
Жыл бұрын
I don’t think they have the rubber oil line anymore for quite a while. I know it was a huge issue some time back but definitely something to replace if you have them.
@dmunroe12
4 жыл бұрын
I live in Brooklyn, NY. A dealer charged me $684 for labor (labor rate $149/hr) and $ 289 for the water and 54 for coolant. What's your opinion?
@hardlymovingpro
4 жыл бұрын
Down here in Memphis the dealers are charging around $700 net. Labor rate is $120/hr. I can do the job in under 3 hr. The Aisin OEM part is under $120. Toyota red coolant premixed @ Walmart is $13
@dmunroe12
4 жыл бұрын
@@hardlymovingpro Thanks! I see the water pump for $ 184. They charged me $ 289
@hardlymovingpro
4 жыл бұрын
Way overpriced! For another $50, I'd do the whole job parts and labor.
@felixfcovargas7568
Жыл бұрын
Good 👍🏻
@hardlymovingpro
Жыл бұрын
Thanks ✌️
@on-site4094
4 жыл бұрын
That’s a Great explanation video. On replacing water pump. you make it look so easy
@hardlymovingpro
4 жыл бұрын
Thanks!
@jinpark5324
3 жыл бұрын
What are torques when you put back all screws?
@hardlymovingpro
3 жыл бұрын
I hand torque by feel.
@juanitabrown545
7 ай бұрын
What did you put on the bolts
@hardlymovingpro
7 ай бұрын
Nothing.
@juanitabrown545
7 ай бұрын
@@hardlymovingpro i thought it was some kind of grease
@hardlymovingpro
7 ай бұрын
You can coat with RTV to prevent coolant seepage.
@ruiwu3604
3 жыл бұрын
Question : how you know the pump is bad ? My Avalon run and drive good , no over heat , just have some noise around the belt area ? Is it water pump?
@hardlymovingpro
3 жыл бұрын
Could be the water pump worn bearing noise.
@ruiwu3604
3 жыл бұрын
@@hardlymovingpro you can’t just replace the bearing ? Or you have to do the whole thing ? The bearing is inside the pump , correct ?
@hardlymovingpro
3 жыл бұрын
@@ruiwu3604 It's a press fitted component. Don't know of anyone that sells a bearing rebuild / replacement kit. If you find one, let me know. I'd make a video.
@LondonHasFallin
4 жыл бұрын
God bless Toyota engineers. I've seen too many cars that require you to break down half the engine assembly😡. (Ford & GM)
@hardlymovingpro
4 жыл бұрын
Some consider this replacement difficult.
@Neferati1
4 жыл бұрын
I miss old school Fords. Crown Vic, you just unbolt it and swap for a new one. EZPZ
@hardlymovingpro
4 жыл бұрын
Did a ac condenser replacement on a crown vic. Took me 2X longer than a Toyota. Also a valve cover gasket replacement took me 3X longer and the plastic valve cover was cracked.
@samukahtviv1
2 жыл бұрын
Hello I haven’t had problems with the water pump yet on my 07avalon. Knock on wood. Almost at 200k miles. Should I replace it now or just wait until it leaks?
@hardlymovingpro
2 жыл бұрын
I'd replace it. Consider yourself fortunate you got 200k out of them. I've replaced them under 100k. I'd even replace the radiator. The plastic tank or the sealant that fuses the aluminum to plastic gives out. The upper and lower hoses last longer than the pump and radiator! You let your car overheat just one time, the head gaskets are gone. Then it's engine replacement time. All those head gasket sealants don't work on aluminum engines either. Not worth getting stuck somewhere where you'd get ripped off on a emergency repair. Dealers are charging upwards of $700 to replace a water pump. Maybe more for a radiator.
@samukahtviv1
2 жыл бұрын
@Hardly Moving Productions thank you. Financial issues at the moment but I hope it can work until spring/summer time. Should I purchase the gates or oem version? And what radiator do you recommend? Thank you god bless you
@hardlymovingpro
2 жыл бұрын
Gates is good. Aisin is the OEM. Denso makes the radiator.
@samukahtviv1
2 жыл бұрын
@Hardly Moving Productions thank you so much. Also, would lifting up the motor mess up the exhaust pipes? The flex pipes? God bless you
@eod4usa
4 жыл бұрын
Those wrenches are a necessity when working on a front wheel drive car.
@hardlymovingpro
4 жыл бұрын
Yes ... they do help a lot and makes the job easier.
@truesaiyan8310
3 жыл бұрын
How long did this whole process take?
@hardlymovingpro
3 жыл бұрын
Last one I did on a Sienna with a friend ... 2 hours. Average 3.5 hours
@MrCrazcowboy
4 жыл бұрын
How much would the labor on this job be?
@hardlymovingpro
4 жыл бұрын
Around 3 hours labor time. Different shops have different labor rates. You'll have to shop around.
@trevismosby1628
3 жыл бұрын
I just replaced the water pump on my Avalon. Wasn't difficult but very time consuming! The video was informative. Thanks because I knew nothing about auto repair. And thanks for helping me save $$$.
@hardlymovingpro
3 жыл бұрын
Good for you!
@التجربةبدايةكلإختراع
3 жыл бұрын
Thank you very much
@hardlymovingpro
3 жыл бұрын
You bet!
@chaseoyk.
4 жыл бұрын
Is there torque specs for the water pump bolts?
@hardlymovingpro
4 жыл бұрын
Here you go. Sienna uses the same engine: www.tsienna.net/installation-696.html
@MrBrownchicken
3 жыл бұрын
is trv not recommended on the gasket?
@hardlymovingpro
3 жыл бұрын
Not if it's metal with an inside edge rubber gasket.
@ask43242flight
4 жыл бұрын
thank you & subscribed your channel!
@hardlymovingpro
4 жыл бұрын
Thanks for the sub!
@yurii.5613
3 жыл бұрын
I own almost the same Avalon with 3.5l v6. The idler pulley started to squeak loudly. I'm thinking replacing a belt as well. What brand would you recommend for all these parts and would you replace the tensioner pulley that comes with bracket as well? I've got 245k miles on my 06 Avalon.
@hardlymovingpro
3 жыл бұрын
Yes ... Replacing the pulleys and belt because of the noise and mileage would be prudent. Recommend Bando for the belt and either Koyo, GMB, Timken or SKF for the bearings.
@hardlymovingpro
3 жыл бұрын
Also worn bearings in the alternator can cause noise.
@yurii.5613
3 жыл бұрын
@@hardlymovingpro I sprinkled a 303 protectant on the idler pulley and the noise was gone immediately.
@hardlymovingpro
3 жыл бұрын
Good indication that it needs replacement
@yurii.5613
3 жыл бұрын
@@hardlymovingpro did you mean pulley assemblies or just bearings of those brands? I tried to find sellers of idler pulleys and tensioner pulley of brands you mentioned and didn't find any.
@MoosemanR
3 жыл бұрын
Just had this done by mechanic, looks difficult
@hardlymovingpro
3 жыл бұрын
Just time consuming for me.
@MoosemanR
3 жыл бұрын
@@hardlymovingpro I could handle it but I was on a road trip and it started leaking n bearings making noise.
@hardlymovingpro
3 жыл бұрын
@@MoosemanR I hear that.
@silveriocastillo3852
2 жыл бұрын
Wow that's a lot of work Great job 👍♥️
@hardlymovingpro
2 жыл бұрын
Thanks!
@inhocsigno9151
Жыл бұрын
Really excellent, great work.
@hardlymovingpro
Жыл бұрын
Glad you like it!
@clayton203
3 жыл бұрын
Thanks,got to get me one of them funnels
@hardlymovingpro
3 жыл бұрын
Useful tool!
@ianbrown2989
4 жыл бұрын
where is the one nut that you take off the thermostat housing thats with the two bolts? what size is the nut? can't figure out where it is under the housing.
@hardlymovingpro
4 жыл бұрын
Look at the 7:16 video time mark. With the housing removed, you can see the stud sticking out.
@ianbrown2989
4 жыл бұрын
Hardly Moving Productions 10mm? Need a longer socket since the bolt is longer?
@hardlymovingpro
4 жыл бұрын
@@ianbrown2989 Yes. 10 mm and a longer socket.
@ianbrown2989
4 жыл бұрын
Hardly Moving Productions thank you!
@hardlymovingpro
4 жыл бұрын
@@ianbrown2989 You bet!
@eod4usa
4 жыл бұрын
Where did you get the radiator filler?
@hardlymovingpro
4 жыл бұрын
A link to the spill free funnel is provided in the "Show More" section of this video.
@viktorvezdenetskyi7819
5 жыл бұрын
and how did you diagnose pump failure what were the symptoms?thanks
@hardlymovingpro
5 жыл бұрын
Noise from worn out bearings is one symptom ... the other is continuous coolant leakage/seepage at or around the water pump's weep hole, gasket or seal. When it leaks, the coolant "slings" around water pump pulley area. You can use a pry tool pressed against the pump and put you ear against the other end of the pry tool. If you hear a grinding noise, the pump bearing is on its way out.
@viktorvezdenetskyi7819
5 жыл бұрын
@@hardlymovingpro exactly what I have! thanks man best video on youtube next project will be the spark plugs I saw some video on your channel
@hardlymovingpro
5 жыл бұрын
Great! And good luck with the repair and thanks for your support!
@Usmanthemecano
5 жыл бұрын
Beautiful video
@hardlymovingpro
5 жыл бұрын
Thanks for your comment and support!
@Estrelladelnorte-pf8ec
5 жыл бұрын
why RTV on the bolts
@hardlymovingpro
5 жыл бұрын
The bolt mounting point holes may pass through coolant passage ways. If sealant (RTV) is not applied to the bolt threads, coolant seepage may occur through the bolt holes. If seen this happen with other water pump bolt holes. Also, the water pump's 12 mm bolts, when pulled for the first time, had sealant residue on the threads.
Пікірлер: 288