I have a 2.2 Auris which is similar to this engine. I'd highly recommend taking off the intake manifold and clearing it out, along with the runners going to the valves. I done it on my car a year or two ago. Made a massive difference to the performance. I was working at a slow(ish) pace, took about 4 hours all in with disassembly, soda blasting and refit. You can get to the crank by removing the drivers wheel.
@mikeonfreeserve2926
2 жыл бұрын
Just unbolt the egr, lift it out and spray inside with brake cleaner top and bottom and leave each side for 10 mins and scrub out with an old toothbrush. Don't be spraying with compressed air. That sooty stuff is carcinogenic. Put a mask on.
@meathhillmac
2 жыл бұрын
Great video thanks guys, it helped me yesterday
@bigbadwolf4392
3 жыл бұрын
I love your videos and your accent too.
@danielshenouda1987
10 ай бұрын
Thank you!!
@mikeberry304
3 жыл бұрын
Good old green , efficient clean running vehicles eh Sandy , carbon monsters
@sandyande
3 жыл бұрын
Roll on electrics Mike, and nae work!!! LOL
@mikeberry304
3 жыл бұрын
Anderson can't wait, hopefully we will have retired by then and just be taking cars for mots , got my induction heater the other day , same as Dave's, cracking piece of kit 👍
@peterkelly2144
Жыл бұрын
Safety squint engaged with the airline blower,carbon deposits aren’t much fun in your eyes!
@danielgreenbaum8875
3 жыл бұрын
Great video sandy ive found soaking egr and throttle bodies in mr muscle oven cleaner them come out like new
@sandyande
3 жыл бұрын
Cheers Daniel I'll tell Rody that top tip! Cheers sandy
@danielgreenbaum8875
3 жыл бұрын
Yeah even spray in inlet manifold if he has to clean out leave for a couple of hours to soak in then clean out with brake cleaner sometimes had to do a couple of times
@sliderdriver1
Жыл бұрын
I'd strip the manifold off and deep clean both the valve and manifold.
@S-O-T
2 жыл бұрын
If I blank off the EGR will it put the engine management light on🤔
@sandyande
2 жыл бұрын
Yes it probably will
@Mr330d
2 жыл бұрын
If your car doesn’t have a DPF fitted and leave the plug on it EGR it’ll register as working perfectly but obviously no gasses pass through
@michael0450
Жыл бұрын
No it wont
@iankelly2110
3 жыл бұрын
can the launch reset the learned values the ecm is reading off the old values
@sandyande
3 жыл бұрын
I don't know Ian about that I'm scarred of that launch after I done s reset on a Renault scenic 1.5 diesel after changing the no.4 injector, the thing started still with s misfire so I reset fuel adaption and fuel pressure regulation and now it will no start, even after renewing the 4 injector s!!!!
@iankelly2110
3 жыл бұрын
@@sandyande Would the Autel code the injectors for you maybe the launch did not complete the Job. An old boss of mine used a launch to do a DPF regeneration on a Renault and it froze while doing the regeneration them cars decode the injectors 2 inject an extra injection cycle to burn off the soot and because the launch froze the injector lost its coding and would not start either
@sandyande
3 жыл бұрын
I'll try that Ian, one major problem I see on the pids the rail pressure setting shows blank but the rail pressure hits 200bar fires the injectors then the pressure just dissaptes!!!
@iankelly2110
3 жыл бұрын
@@sandyande thats wired all right are the injectors reconditioned or new if u have a sensor simulator u can fool the ecu on the signal wire true the pressure sensor
@sandyande
3 жыл бұрын
Injectors are brand new from Renault£175 each!!!!!
Пікірлер: 23