Easy guide on how to upgrade your Corolla with cruise control.
Please note: If your car isn't pre-wired for cruise control, after your installation the cruise light may not appear on the dash. Take the car for a drive and set cruise function, it will work properly.
Cruise Control Switch Kit: eazidiy.square.site/product/n...
Cruise control switch #:84632-34011/84632-34017
Amazon Link (Just the Switch): amzn.to/43bVByg
** Helpful Resources:
For most Toyota, go to ; www.rostra.com/custom-drive-by...
Go over to 250-1836 then click on Form #5156 and scroll down to the Corolla section.
Video to remove airbag : • Corolla gets OEM fit S...
** The use of the speed cruise control system:
1. Cruise opening: When normal exercise (speed is more than 40KM / 25 MpH), first press the ON-OFF button on the top of the cruise handle, the green cruise light rises, then the handle is moved down (-SET direction), the right foot loosens the accelerator pedal, and the cruising begins. After cruise is open, you can add and drop speed at will (push +RES to speed up) (dial -SET to decelerate).
2. Cruise suspension: Brake immediately (not closed); when the cruise is started, the direction of the steering wheel (the direction of the CANCEL arrow) is pulled, and the cruise is immediately lifted (not closed).
3. Cruise recovery: Dial up the cruise handle (+RES arrow direction).
4. Cruise shutdown: Press the ON-OFF button at the top of the cruise handle directly, and the green cruise lights go off and Cruise off.
Негізгі бет Автокөліктер мен көлік құралдары Toyota Corolla Gets OEM Cruise Control Switch Installed | 2009-2013 | 10th Gen Toyota
Пікірлер: 103