Thanks Hamish. Just applied this fix and did the soldering myself. Saw the fuel light come on for the first time in ages....Was a bit hairy driving on the highway waiting for the light to come on...
@mikebodey3993
Жыл бұрын
Good man Hamish, thanks good video
@dsimpy1972
5 ай бұрын
Perfect. Thanks so much. This was a very easy fix for an issue I’ve had for months.
@ChromaticSemitone
2 ай бұрын
Did you soldering it yourself
@haroldholt7646
Жыл бұрын
Cheers Bro 🤙🏻
@kleopapraku9762
11 ай бұрын
Thanks bro it works
@user-rt2xe1rp1k
8 ай бұрын
This same malfunction happened to my 2014 Toyota Fortuner at 109,000 km. Had to have the instrument cluster replaced as I couldn't find anyone to repair it. At 165,000 km the symptoms reappeared. This time the sending unit in the tank had to be replaced. Seems that both types of malfunction are commonplace in Fortuner/Hilux of this vintage.
@DapperDavo
Ай бұрын
Same thing happend to me. My sender had to be replaced probably because I was going so low on fuel all the time and picking dirt up from bottom of fuel tank. Long after, I ran out of fuel and stll registeted 1/4 tank. I will do this fix tthis week...
@tommynhardt6229
5 ай бұрын
Hey thanks,makes lot of sense
@rumpyNZ
9 ай бұрын
Thanks for this, I had the 1/4 tank,no fuel problem a few months ago and finally researching what the issue might be. I was going to start looking at the fuel tank,😅 this has probably saved me hours of work.
@hamiltontitinho1860
6 ай бұрын
thats work perfectly, my is working now thanks 😎😎😎😎😎😎😎😎😎😎😎
@jorgeperez-hc6ee
10 ай бұрын
me sirvio gracias
@dannythomas7902
11 ай бұрын
R308 and R309 was it Sep 2023 when you solder 1 leg it falls off meaning the other side off, lost 2x needle widths of fuel after.
@DanWilliamsKILLR0Y
7 ай бұрын
What about for a 2012 (KUN25R) hilux, The circuit board is different
@Ratbuilds
7 ай бұрын
Are you sure? They should be the same? Has it happened to your 2012?
@sion6848
9 ай бұрын
No need to change the resistor?
@mantechvlogs5902
8 ай бұрын
Fuel guage toyota problem world wide
@muhammadusman-so7no
7 ай бұрын
sir you just soldered them Or did any resistance change also
@Ratbuilds
7 ай бұрын
Just re solder, no resistors we’re changed. If you take it into a Toyota dealer I’ve been told they do it for free 🤙🏼
Пікірлер: 20