Thank you so very much, Fast Fix, for posting this! When my door handle (2001 Tacoma Base - 256K miles) finally gave out, I wasn't sure who to take it to to get fixed. Then I happened upon your video. Great pace, great instruction, great shots of the work you were doing. Gave me the confidence to do this myself. Decided to change out my speakers at the same time - a nice 20th birthday present to my beloved little truck which I purchased in July 2001.
@FastFixYouTube
3 жыл бұрын
Wow, you’ve made good use of that truck! The one you see in the video was a 2004 I believe. It was just traded in a few months ago. Had roughly 200k on it. Great truck except for the door handles! Glad the video helped you. I hope your parts last a while! I found better luck with the more expensive door handles. Just FYI if you bought on the cheaper side. Thanks for the comment 👍
@martinhousemuse
2 жыл бұрын
I'm replacing my 2001 door handles as well. I'm not too handy, so door 1 took a while, but door 2 will go more quickly.
@MajDuty
2 жыл бұрын
I purchased my 2000 Tacoma new that same year and still own it. I have a second vehicle that I drive at least half the time so much Tacoma sits in my driveway a lot and I have had no less than six people leave notes on it or come to my door wanting to buy it
@rlow3516
5 ай бұрын
Just changed out my door handle followed your directions step by step. Thanks for the clear, accurate and nicely videoed instructions. Made this job much easier.
@FastFixYouTube
5 ай бұрын
Great to hear! Thanks for the nice comment 👍👍👍
@DensShop
Жыл бұрын
This is the very best video posted regarding changing the door locks. I just finished changing the door locks in my 2001 Tacoma Prerunner and I used this video as the guide. 100% success. Thank you for this fantastic video. The locksmith wanted $375. I did this job for $35.
@FastFixYouTube
Жыл бұрын
Absolutely! Thank you for this comment. Love hearing how it helps. Glad you got this done on the cheap!
@erickulkarni8250
2 жыл бұрын
This was by far the most direct, easiest to follow instructional I have had the pleasure to need. All in all, it took me 15 mins to replace my handle with no issues whatsoever. Thank you very much.
@FastFixYouTube
2 жыл бұрын
Wow, fantastic! 15 minutes is fast. Glad the video was helpful. Thanks for the comment 👍
@paulpaul9313
3 жыл бұрын
Dude, thank you for your excellent video on how to replace the door handle! I followed all your directions and I replaced the handle! You saved me a lot of $$$! Keep on posting your excellent videos!
@FastFixYouTube
3 жыл бұрын
You are welcome! Your comment is much appreciated 🤙
@debradicks3918
2 жыл бұрын
This was the very best video that I watched for replacing my door handle!! Very informative! You saved me a lot of money! Thanks!!
@FastFixYouTube
2 жыл бұрын
Very happy to hear that. Thanks for the comment 👍
@trout4bait549
2 жыл бұрын
The fact that you were able to get a clear shot of connecting even ONE of the rods, alone, is worth a thumbs up, and an algorithm comment bump. ;)
@FastFixYouTube
2 жыл бұрын
Haha, I’ll take it! That was the most challenging part of the video to capture…
@tomcarroll3338
Жыл бұрын
Thank you. After watching several other videos concerning replacing Tacoma door handles, this was by far the best.
@FastFixYouTube
Жыл бұрын
Great to hear!
@haroldchoate7497
Ай бұрын
Thank you, for this excellent tutorial. I used it to replace a friend’s broken door handle.
@FastFixYouTube
Ай бұрын
Love to hear it! You are welcome! Thanks for the comment!
@dannydillard7406
3 жыл бұрын
Perfect! Saved the Day. My buddy broke my handle today and offered to pay for it. After a few free beers from him, we did it ourselves thanks to your video. Thanks man, cheers!!
@FastFixYouTube
3 жыл бұрын
Hell yeah! Repairs always (usually lol) go better with beers. Glad this helped! 🍻
@nickhouston638
Жыл бұрын
Great video! Had to destroy white clip w needle nose as Rod would not pull out of old handle. 1st time Changing out 20 year old handle. Door panel clips broke but auto parts stores have these. So happy now! Only negative is my 10mm socket is in door now. Looked all over and not at bottom. It's over on door opening side but can't reach and no luck w magnet. If new to this, just watch video over and over. I'm back in business. Thank you!
@FastFixYouTube
Жыл бұрын
Glad this helped! Even though another 10mm had to be sacrificed. Haha! Thanks for the nice comment and nice job 👍
@EyesWideOpen77
5 ай бұрын
I watched a couple videos about this and by far this one is the clearest and most concise. Thanks for posting it!
@FastFixYouTube
5 ай бұрын
Glad it was helpful! Thanks for the comment 👍
@breamhook
2 ай бұрын
Thank you for taking the time to make this video! I replaced mine today, after watching your video! Thanks a lot. Now I need to know how to fix my door lock on the back door it keeps sliding down when I open the door. If you try to shut the door it hits the medal bar on the frame. I have to slide it up every time before I shut the door.
@FastFixYouTube
2 ай бұрын
Hello! I’m glad this video helped! Thank you for taking the time to comment, I appreciate it 👍👍. As far as the rear door lock, I have not personally had any experience with them, but I’d start with removing the door panel and inspecting the connections. More than likely, a rod is bent or not secured well to a clip. Just have to open things up and look around. Sorry if this doesn’t help much. Best of luck!
@kbaca9415
3 жыл бұрын
Excellent demonstration! I have a 2001 Toyota Tacoma Prerunner SR5 that my mom bought brand new. Since I've had it the past 12 years, I've replaced both front exterior door handles once. This is my second time replacing and needed a refresher on how to. After watching this, I remember what we did last time, and your list of tools at the beginning was very helpful. Thank you.
@FastFixYouTube
3 жыл бұрын
You’re welcome! Glad this video could be of help. I appreciate the comment. As much as these break, it’s amazing we’re all not pros. I’ll have to watch my own video over to get a refresher for the next replacement. Cheers!
@SavDog262
Жыл бұрын
See my reply so you don't have to go through this again.
@Danyang1
2 жыл бұрын
Thank you for the video! I literally just broke my door handle this morning from a frozen door. I was hoping there was a solution and your video it’s very informative and gives me the confidence I think I can get it fix myself
@FastFixYouTube
2 жыл бұрын
Hello. Yes, totally doable for the average wrench! Glad the video helped and best of luck! 👍
@brettmills2470
3 жыл бұрын
Pro tip! Don’t forget, the point you really need to lube to help keep from happening again is at the linkage above the door latch/locking mechanism (straight below the handle links inside door). That is the binding point on most of them and make that all buttery smooth and handle less likely to break.
@FastFixYouTube
3 жыл бұрын
Excellent point! Thanks for commenting 👍
@philipkelly3697
2 жыл бұрын
This is it. My new handle wouldn't even work until I did this and then worked the inner handle back and forth 25 times. Now its smooth as granny's caboose! So not that smooth but much smoother.
@BiggFishTV
2 жыл бұрын
@@philipkelly3697 🤣
@bobs61
3 ай бұрын
Like fix it videos that get to the point, no excess bla bla bla. Thank you !
@billyhammond5251
4 жыл бұрын
I watched a few dummies be fore I watched you.you did it like a pro.thanks your the man
@FastFixYouTube
4 жыл бұрын
Haha, thanks man! Glad the video helped!
@hellwitch6663
Жыл бұрын
BEST VIDEO FOR THIS JOB! I've watched four of these videos today. This one has the most detail regarding the two rods that hook to the lock mechanism and handle mechanism. thank you kind sir!
@FastFixYouTube
Жыл бұрын
Wow, thanks!
@JamesMontellato
5 ай бұрын
Thank you for sharing. This is an excellent video, listing the tools right in the beginning, as well as links to useable resources. Absolute gem. Thanks again man, appreciate you!
@FastFixYouTube
5 ай бұрын
You're very welcome! Thanks for leaving a comment. I appreciate it!
@mcafair
Жыл бұрын
Concise and to the point-did NOT waste my time showing me things I should already know. THX!
@FastFixYouTube
Жыл бұрын
You bet!
@jamiesimmons2042
2 жыл бұрын
Thank you for the very detailed instructions. I don't work on vehicles much. Great job and Thank You. I got both of mine changed perfectly without paying garage prices...
@FastFixYouTube
2 жыл бұрын
Hello. Fantastic! Always great to hear a success story especially when it’s someone who has relatively low experience working on vehicles. Nice job and thanks for the comment 👍
@mangogrower5426
Жыл бұрын
Thank you 🙏. Very concise directions with clear images. No extraneous BS 😃
@FastFixYouTube
Жыл бұрын
You're welcome!
@caroldigiovanni6489
2 жыл бұрын
This is an 8 minute video but it takes 3 hours to accomplish this task! It is also great if you have a lot of patience, and long, thin fingers. Got it done, good instructions.
@FastFixYouTube
2 жыл бұрын
Hello. Yes, the videos never tell the full story of the process. Just so you know the “fast” in Fas Fix is a reference to the expediency of the video helping the viewer get the job done properly and not necessarily in reference to the job itself. Lol, yes long skinny fingers to help quite a bit. It’s weird, but I hear that comment a lot and maybe I should mention it because it’s very true. Thank you for the nice words too 👍👍👍
@jesusmejia3910
3 жыл бұрын
Thank you for this great video. My part came in today via Amazon. I changed it out in about 30 minutes. Taking it apart was way harder than putting it back together. I definitely would not have tried it myself, if it wasn't for this video ,thank you! Much love from Central California 😎
@FastFixYouTube
3 жыл бұрын
30 minutes is making excellent time! Glad the video helped you and I sincerely appreciate the comment. Much love from East Nebraska 🥶
@carastinson9474
4 ай бұрын
Thanks so much! I did this last year. Now 1 year later I must do it again. Done buy cheap handles. I just paid for OEM and I should be installing today.
@FastFixYouTube
3 ай бұрын
Hello. Yes definitely by the expensive OEM ones. The remanufactured ones or offbrand versions only last about a year as you’ve discovered. Best of luck for the future!
@jessemurillo2920
2 жыл бұрын
Video is spot on! Your video saved me from having to take it to the shop and spend money 💰 Thank you!!
@FastFixYouTube
2 жыл бұрын
You’re welcome! Glad it helped 👍
@philipkelly3697
2 жыл бұрын
good vid! More advice for you out there....your handle likely keeps breaking because that dang linkage inside the door to the handle rod keeps binding. You can see it going down from the handle and connecting to the inner hand rod. Spray the mess out of that linkage with your favorite lubricant. Then work the inside door handle rod (the one that is parallel to the ground when you have the door panel off) back and forth 20-30 times to really get that linkage working smoothly again. My new handle wouldn't even work until I did this and now it's like new. Also to gain accesss to the bolt closest to the door edge pop off that little rubber piece then you can stick your socket extension in straight. Don't know if that was mentioned in the vid. Happy wrenchin!
@FastFixYouTube
2 жыл бұрын
Great recommendations! Yeah, the lubricant is an absolute must on these. Thanks for calling that out 👍
@stevanrose7439
2 жыл бұрын
The latch on my tailgate was not working so I took it apart and was able to use jb weld to fix the broken part. It was metal to plastic so the repair was easy. I think it should last a long time. The tailgate doesn’t get used as much and I’m gentle with it when I do open it.
@stephenwilliamson8364
3 жыл бұрын
Worked perfectly! I know this video saved me a lot of $. I usually have to have Toyota do things and I don’t have deep pockets. Thanks!!
@FastFixYouTube
3 жыл бұрын
You’re welcome! Glad to hear this video helped you 👍. I started the channel to save people repair bills and I’m glad it worked out for you.
@bthompson2192
4 жыл бұрын
Wish I could hit the like button 100 times more!!! You made this info easy enough for 2 girls to do. My daughter and I Thank You.
@FastFixYouTube
4 жыл бұрын
Ha! I wish that too! Glad this video helped you. It’s always good to hear success stories like yours. Congrats on a good job!
@stevanrose7439
2 жыл бұрын
Great video. The reason I’m responding is my 2002 Tacoma needs a new door handle. And with your video I think I can do it without much trouble. Thanks again. I think I’ll go to Toyota to get a new one because doorman parts like this don’t last as long.
@FastFixYouTube
2 жыл бұрын
Hello. Yes, absolutely get the factory handle from Toyota or spend the extra money on a more expensive aftermarket handle. In my experience, the cheap replacements only last a year or two. If you’ve got some mechanical experience or just a little inclined, you can absolutely do this yourself. Just set aside some time and keep this video handy 👍 Thanks for the comment!
@stevanrose7439
2 жыл бұрын
Got it changed pretty easy. Although I did add jb weld on the stress points of the new one before I put it in. And I jb welded the old one for a spair see how long it lasts. I’m the only one that drives this truck so I take it easy when I open the door. No yanking on the handle it isn’t necessary to open it.
@saengvanhphanyavong7010
3 ай бұрын
Thank you very much. Your demonstration is clear which help me a lot.
@FastFixYouTube
3 ай бұрын
You are welcome! Thanks for commenting 👍👍👍
@BiggFishTV
2 жыл бұрын
Great video ! Very informative & super easy to follow. I’m amazed at how you were able to get all of the finesse interior work all on video. Awesome job !
@FastFixYouTube
2 жыл бұрын
Thank you! Glad this video helped! I appreciate your comment 👍
@futtbucker2388
3 жыл бұрын
Great video. This is the second time I've had to use it. Both of my door handles on my two-door Tacoma broke off a year apart from one another
@FastFixYouTube
3 жыл бұрын
Par for the course with these... glad the video helped, twice! 👍
@TimTim72
Жыл бұрын
Thank you very much! I have a 97 Tacoma, which I still love. Very straightforward video which made the project easy to accomplish.
@FastFixYouTube
Жыл бұрын
You are welcome!
@thomasduffy273
2 жыл бұрын
Thanks very much! I especially liked your clear video and comments about disconnecting and re-connecting the two clips to the two rods.
@FastFixYouTube
2 жыл бұрын
You’re welcome! Glad it helped and thanks for the comment 👍
@mrlafayette1964
2 жыл бұрын
Recovering from new truck fever,decided if my rust free 2002 can make it to 400k might as well go for 5. Restoring it to new and this is job 1..thanks man., subscribed.
@FastFixYouTube
2 жыл бұрын
Wow, rust free at that mileage is crazy! The truck in this video was soon discovered to be unrepairable due to a rusted through frame. It’s now probably a scrap heap somewhere. Considering prices right now, I’d hang onto that truck for as long as I could. To the moon! Or 500k 👍
@joelwhittington2814
5 ай бұрын
Thank you Mr fast fix for helping me change my exterior door handle.
@FastFixYouTube
5 ай бұрын
Glad to help! Thanks for your comment 👍
@J3unG
2 жыл бұрын
Thanks so much, bro! I got a 1999 and the door handle on the driver's side broke off in my hand. I just ordered a new handle from Amazon and checking out your vid right now on how to do the replacement. I plan to do it this weekend. Later!
@FastFixYouTube
2 жыл бұрын
Hello. Bummer on the door handle, but they’re all on borrowed time. Best of luck with the repair! Thanks for the comment 👍. Feel free to let me know how it goes.
@BPAIZZY
Жыл бұрын
Thank you, I just had to watch your video once and got right to work. You definitely saved me time and money!
@FastFixYouTube
Жыл бұрын
You are welcome!
@brevs8387
2 жыл бұрын
Better than the other video I found... Clearly explained and with good videography and tips along the way. Thanks! (wish me luck in a few days... Waiting on the replacement).
@FastFixYouTube
2 жыл бұрын
Best of luck! Glad the video did a better job than the other. 👍
@russwilliams9312
3 жыл бұрын
It made the job a piece of cake. 15 minutes start to finish. Thank you!
@FastFixYouTube
3 жыл бұрын
You're welcome! I appreciate the comment.
@carastinson9474
3 ай бұрын
I fixed it! The rods that snap in were bent some trying to get out earlier. I took handles out and bent rods some some now doors are smooth!
@FastFixYouTube
3 ай бұрын
Good stuff! Glad it was something simple. Nice job!
@MichaelMelo-hw3il
Жыл бұрын
Just changed mine following this video. Thanks!
@FastFixYouTube
Жыл бұрын
You're welcome!
@tonydize3944
4 ай бұрын
Beautiful camera work and explained thanks for taking the time 👏🏻👏🏻
@FastFixYouTube
3 ай бұрын
Hello. You are very welcome! I’m glad this video was useful and I appreciate your comment. Have a great day!👍👍👍
@ignacj
Жыл бұрын
Thank you for posting this. Another 2001 Tacoma fix I can do myself!
@FastFixYouTube
Жыл бұрын
Any time!
@liamj.mcmars8383
2 жыл бұрын
Thanks brv. Didn't know this was toyota's issue until bot my handles broke on a date
@FastFixYouTube
2 жыл бұрын
Hello. Yup, it’s definitely a common occurrence. That was the third set of handles installed on that truck. Best of luck on the repair. I appreciate the comment 👍
@piaggio780
2 жыл бұрын
Thank you very much for the very informative video… I took on this project this afternoon and replaced my driver store outside handle… And thanks to you it went very smoothly!
@FastFixYouTube
2 жыл бұрын
You are very welcome! I’m glad the video helped you and nice work on the fix. Thanks for the comment 👍
@dickdog1
2 жыл бұрын
you are a lifesaver, thanks. Now to figure out why my door was sticking??
@FastFixYouTube
2 жыл бұрын
You’re welcome! Maybe gym? 🤣👍
@diogeneslamp8241
Жыл бұрын
Thanks for this video. It saves me some time. Borrowed my father’s truck and it broke (20year old plastic) and he yelled at me anyway, so I am fixing it. Got a genuine handle on eBay, hopefully lasts another 20.LOL
@FastFixYouTube
Жыл бұрын
Ha! Best of luck. The last one I put in has stood the test of time….so far
@diogeneslamp8241
Жыл бұрын
@@FastFixKZitem I installed it today. I had a bit of a problem getting the thicker rod off the door handle. A heavy duty hook tool made quick work of it. I used wd40 as you suggested to clean the lock and then used that lock ease stuff with the graphite because the WD will evaporate after. While. The WD also made quick work of removing grease I got on the white paint on the truck. Thanks again, your advice helped me do the job much quicker-at work on my lunch hour! I still wonder if it just cracked or if it was vandalism… 500 plus sold on eBay, so probably just plastic fatigue after 20 years.
@FastFixYouTube
Жыл бұрын
Awesome, glad the repair went relatively smooth. Yep, it’s fatigue. They break all the time. It’s a common problem. Thanks for all the comments! Much appreciated 👍
@adamclark9819
3 жыл бұрын
The best video I found on KZitem for this fix! Thanks for the easy to follow video and good instructions! Just subscribed! 👍
@FastFixYouTube
3 жыл бұрын
That’s great! Thanks for the nice comment 👍
@Richard-lj2lx
Жыл бұрын
Thanks for this video! The instructions are clear and easy to follow.
@FastFixYouTube
Жыл бұрын
Glad it was helpful!
@bridgettegarfield9499
3 жыл бұрын
You did a great job explaining. I was able to do it almost by myself. My door won't unlock with the key but I don't even care at least I have a door handle 😅 thank you!
@FastFixYouTube
3 жыл бұрын
You’re welcome! I appreciate the comment 👍
@raymondcasabonne9055
Жыл бұрын
This was a fantastic video with a great step by step instructions!
@FastFixYouTube
Жыл бұрын
Glad it was helpful!
@rlow3516
5 ай бұрын
Thanks for the very informative video. Great detailed instructions.
@FastFixYouTube
5 ай бұрын
You’re welcome! Thanks for leaving a comment, I appreciate it 👍👍👍
@k.cashman427
Жыл бұрын
Kickass video. Great closeups and detailed explanations. Thanks and subscibed!
@FastFixYouTube
Жыл бұрын
You’re welcome!
@daviddemento367
3 жыл бұрын
Best video I have seen on this repair. Thank You.
@FastFixYouTube
3 жыл бұрын
You’re welcome!
@vuemouam3r1
2 жыл бұрын
Quick and easy fix. Thanks for sharing this video.
@FastFixYouTube
2 жыл бұрын
You bet!
@giovannivillanuevaiim3437
2 жыл бұрын
Thanks for the video. Just did mine a little while ago on both doors '01 tacoma prerunner. The only thing that I struggle a bit was the re-installation of the plastic latch back to the metal rod that connects to the door latch from the inside of the passenger door. The metal rod was kind of too short to re-insert to the back of the release handle and you've got just a little room to slide back the plastic lock that holds the rod. It's a bit challenging but definitely consider it a "Fast Fix!" Thanks again for your great video.
@FastFixYouTube
2 жыл бұрын
You are welcome! And yes, I agree. There are always elements of every fix that are tricky / challenging. Thanks for the comment 👍
@RyanTheLaiEn
2 жыл бұрын
Thanks for taking the time to do this!
@FastFixYouTube
2 жыл бұрын
You bet!
@hamhawk247
11 ай бұрын
Excellent video 📹 👏 you know exactly what your doing and are able to teach that perfectly bravo 👏 cheers 🍻
@FastFixYouTube
10 ай бұрын
Thank you! Cheers!
@Ibaneddie76
Жыл бұрын
The aftermarket handles are trash this is my 3rd set I've gone through in only a few years. I watch these videos every time I have to replace them even though I've done it before the videos are great!
@FastFixYouTube
Жыл бұрын
Glad to hear it helped even though your a hardened pro! Agree on the build quality. I sprung for the more expensive handles this time and they’ve now lasted a few years 👍
@pblopez8757
3 жыл бұрын
Great step by step tutorial. Used each step to success. Thanks for your help!
@FastFixYouTube
3 жыл бұрын
You’re welcome! I appreciate the comment 👍
@Jmep0309
2 жыл бұрын
Thanks bro! Very easy to follow instructions and straight to the point! New subscriber here.
@FastFixYouTube
2 жыл бұрын
That you sir!
@toddalbo1734
3 жыл бұрын
just got handles for my 03 thanks for a pretty cut and dry video
@FastFixYouTube
3 жыл бұрын
You’re welcome
@jdcatz07
2 жыл бұрын
Did it this morning. Great video, great instruction! Everything went like you said. You might want to add your list of tools/parts. The connectors. I broke 4.
@FastFixYouTube
2 жыл бұрын
Hello. Oh shoot….well I suppose that makes sense considering the door handle fails so easily. Where did you find replacement clips?
@rickylove619
2 жыл бұрын
Dud thank you so much. This video is made perfect. You made it look very easy to do . I’m changing mine tomorrow. Thanks again
@FastFixYouTube
2 жыл бұрын
Hello! Best of luck! I hope I didn’t make it look too easy, but in my opinion, it is something most can do. I have heard people with larger hands have more issues, but other than that, pretty straight forward. Thanks for the comment!
@WA-eg7ft
3 жыл бұрын
One and done. Do the right side tomorrow. Thanks for keeping simple
@FastFixYouTube
3 жыл бұрын
You bet! I appreciate the comment 👍
@doby199726
Жыл бұрын
Thanks, excellent video! You made it a breeze to replace my door handles. Appreciate it!
@FastFixYouTube
Жыл бұрын
You're welcome!
@aaronjohn6586
3 жыл бұрын
Just replaced mine for the 2nd time. The cheap 1 lasted 8 months but hopefully the Dorman will last a bit longer. Thanks for the great tips and tool links.
@FastFixYouTube
3 жыл бұрын
Yep, sounds about right. The cheap ones don’t last long at all. This is the 3rd door handle on the truck. Hope the nicer ones lasts longer. So far so good!
@donfreemantulsa
Жыл бұрын
Excellent teaching video. Thank you!
@FastFixYouTube
Жыл бұрын
You bet!
@nhrifle
3 жыл бұрын
Thats my project this weekend. Thanks for the walk thru, hopefully all I have to worry about is frozen fingers.
@FastFixYouTube
3 жыл бұрын
Haha, I hope so too. No problem with the vid and glad it helped. Good luck on the project 👍
@joekr1101
Жыл бұрын
Very straightforward. Thank you!
@FastFixYouTube
Жыл бұрын
You bet!
@russwilliams9312
3 жыл бұрын
This is an excellent video. Good camera work and easily understood instructions.
@FastFixYouTube
3 жыл бұрын
Thanks for the excellent comment! Hope the repair goes well for you.
@mikeconroy1173
Жыл бұрын
excellent video.. one of the best I've ever seen
@FastFixYouTube
Жыл бұрын
Thank you!
@Sirgoofyboots
3 жыл бұрын
Great video bud! Filmed and explained everything so well! Thank ya dude
@FastFixYouTube
3 жыл бұрын
You’re welcome!
@TheChessmaster09
4 жыл бұрын
Done this a few times already but rewatching helps alot 👍. Thanks bro
@FastFixYouTube
4 жыл бұрын
You are welcome!
@clyderaw
2 жыл бұрын
Awesome! It worked exactly like you said. Thanks
@FastFixYouTube
2 жыл бұрын
Great! You are welcome!
@navarromendiri
3 жыл бұрын
Thanks, after watching your video, replacing the handle in my Tacoma 2004 was much more easier
@FastFixYouTube
3 жыл бұрын
Glad to hear that! They break often enough so I’m sure you’ll get more practice in a few years. Thanks for the comment!
@robertmason7971
2 жыл бұрын
Your vid was exactly what I needed. "You the MAN!" Thank you very much...
@FastFixYouTube
2 жыл бұрын
You’re welcome!
@deweylitwiller2775
3 жыл бұрын
Great video. Thanks. The only instruction missing was that the inside door handle needs to slide towards the front of the door. I thought it must just pop out, but there are tabs that must disengage by sliding the inside handle forward a bit.
@FastFixYouTube
3 жыл бұрын
Excellent tip! Thanks for the comment. Much appreciated!
@jeffstine8126
3 жыл бұрын
Good instructions. Only improvement: would definitely recommend having 9mm Door Trim Panel retainers on hand. These hold the interior door panel to the door and several will break when you pop the interior door panel off.
@FastFixYouTube
3 жыл бұрын
Yes, I completely agree. Thanks for the input!
@alanrichards3181
2 жыл бұрын
Great vid! I recommend a OEM toyota door handle as well, so you likely won't have to do it again in the future.
@FastFixYouTube
2 жыл бұрын
Hello. Yes, 100% use the OEM part. Although this part was not OEM, it was of better quality and has so far stood the test of time. Thanks for the tip!
@timothyandrewgalable
8 ай бұрын
Great video love the step.by step
@FastFixYouTube
8 ай бұрын
Glad you liked it! Thanks for commenting 👍
@jrichbetancourt
2 жыл бұрын
Very good video very detailed and helpful 👍🏼👏🏼
@FastFixYouTube
2 жыл бұрын
Hello. Thank you! Glad the video helped 👍
@jorgeromero2533
2 жыл бұрын
Excellent video. Easy to follow. Done dit it. Thanks!
@FastFixYouTube
2 жыл бұрын
You bet! Comment appreciated 👍
@craigumanoff951
3 ай бұрын
Nice work! Thanks very much. Come to Portland Or. and I'll buy you a beer.
@FastFixYouTube
2 ай бұрын
Hello! Heck ya, I’d take a beer anytime! Haha, thanks for commenting and great work!
@robertortega331
Жыл бұрын
Very good instructions thank you
@FastFixYouTube
Жыл бұрын
You are welcome!
@rdaws73
Жыл бұрын
Wd 40 is not a lubricant fyi. Thanks for the vid, helped me out
@FastFixYouTube
Жыл бұрын
Yes, correct. And you’re welcome!
@carastinson9474
3 ай бұрын
Thanks, it was awesome and learned a lot!!
@FastFixYouTube
2 ай бұрын
Glad it was helpful! Thanks for taking the time the time to comment and have a fantastic day!
@natespnwadventures
2 жыл бұрын
Excellent video and explanation! Going to replace mine this weekend 😎
@FastFixYouTube
2 жыл бұрын
Great! Best of luck and thanks for the comment 👍
@estebanramirez1967
3 жыл бұрын
Great video ,, saved me time and money,, thanks guy
@FastFixYouTube
3 жыл бұрын
Glad to hear that! I appreciate the comment 👍
@brettomomyces
3 жыл бұрын
Good video my dude! about to do both sides on my 2003
@FastFixYouTube
3 жыл бұрын
Good luck! Glad the video helped and thanks for the comment!
@zunich1
Жыл бұрын
Thanks for posting.
@FastFixYouTube
Жыл бұрын
You bet!
@breamhook
2 ай бұрын
Thank you for the reply
@kutangelwings
2 жыл бұрын
Awesome. Thanks for posting this.
@FastFixYouTube
2 жыл бұрын
You bet! I appreciate the comment 👍
@schadlarry
4 жыл бұрын
This will be my third time replacing the handle. Dealer wants like $90. Went cheap and bought off eBay. They tend to last 2-3 years. At least the last one had a warranty. Should be an expert by now but always need to refer to a how to guide. You make it look so easy.
@FastFixYouTube
4 жыл бұрын
You are welcome! This is the 3rd handle on this truck. The last two were cheap. This one was $50ish I believe. We’ll see if it lasts! Thanks for the comment 👍
@philipkelly3697
2 жыл бұрын
lube the inner door linkage and they will last three times as long. Made a huge dif on mine!
@futtbucker2388
4 жыл бұрын
Thanks for this. You saved me some money
@FastFixYouTube
4 жыл бұрын
Glad you hear it! You are welcome!
@futtbucker2388
4 жыл бұрын
I just did it step-by-step and it worked great. I had to do this on an old Chevy one time and learned the hard way that you have to roll the window up in order to access all the stuff inside the panel. Fortunately I remembered that this time. Thanks again that was a lot of help 🙂
Пікірлер: 327