This is the kindest well schooled mechanic I’ve ever listen to. This man is a wealth of knowledge
@jefftaylor947
Жыл бұрын
I can't tell you how many times your videos have saved my project with my 326k mile 99 Tacoma 4WD. THANKS FOR EVERYTHING!! You've saved me thousands of dollars in what would have been labor charge. Thanks my friend!
@ENGINEER125
Жыл бұрын
A late comment to this thread from an owner of a 2002 Tacoma. The four bolts are torqued to 50 lb-ft per the factory service manual which agrees with the earlier comments. You made a verbal comment regarding someone who said the seal was not installed far enough into the axle tube. As it turns out there are two different designs for the seal installation, and you are working on a truck without ABS brakes. With ABS, there is a tone ring on the axle which results in the seal being installed much further down in the tube to allow for the length of the tone ring and retainer.
@WhiteyMcWhite5
6 ай бұрын
This was great, thank you for the tutorial. I wish I watched this before I purchased the parts because I mistakenly assumed that the wheel bearing was required. My bearing is not loose or noisy, so I'll shelve that for the future. This looks like a very straightforward repair.
@shortydancer
3 жыл бұрын
I love this channel. Id love to have this guy as my mechanic and give him my money.
@Sentrme
9 ай бұрын
Thank you very much for sharing your wisdom and experience!!! Luckily I've worked on vehicles growing up but nothing is better than learning from experience. Before diving in.
@markreynolds3850
2 жыл бұрын
According to1985 Toyota 4 runner FSM. Torque four nuts to rear axel to51 ft. -lbs. or 69 N.m Thanks Peter for a great video.
@thejerkyshack8040
Жыл бұрын
I love your constant reminders and perfect demonstrations of best practices. You show the job exactly as it is supposed to be done with well delivered instructions. Thank you for sharing your knowledge and skill.
@elgatogordo9523
4 жыл бұрын
Great video 👍 I’m learning so much from your techniques and your knowledge you share with your subscribers. I’ll be doing this task on my son’s 08 Tacoma 4x4 right rear seal. Nearby shop was charging him over $1,100 telling him he has a bad wheel bearing and will need to replace the entire assembly. That’s not even including replacing the drum brakes which is in need of replacing. Glad I subscribed and will be sharing the good news with my son.
@Jakob101st
Ай бұрын
guys a life saver. and money saver.
@1420MHZ
5 жыл бұрын
I'm glad you showed the rear diff breather, when it gets clogged it is unable to vent the pressure which eventually busts the rear axle seals. This is the 1st part I replaced on my 3rd gen after I bought it with 232K miles on the clock and sure enough, it took lots of deep creep lube to free it up. Luckily the axle seals were bone dry, from the outside, but I'm too afraid to look inside the gears by removing the abs sensor... Ignorance is bliss! :)
@ToyotaMaintenance
5 жыл бұрын
Thanks for sharing
@randomdude8310
2 жыл бұрын
I think my clogged diff breather @ 100f outside temp, partially, caused my rear axle seals to fail around 300k miles...or just finished them off ;)
@pinemontgo
Жыл бұрын
@@ToyotaMaintenance God im glad I passed on this work 🙏
@sirrustybeakman
Жыл бұрын
Excellent video! If I'm not mistaken I believe the 4 nuts are 59 ft/lbs. I'll be doing this job along with a full rear brake job in the next week.
@rockbay79
3 жыл бұрын
I find your videos extremely educational!!!!! Not all of us grew up learning about vehicle maintenance and repair. I sure did not. I do know how to change the motor oil and filter, as well as rotate the tires. However, I'm just getting too old to perform these maintenance items because I have no lift. I do enjoy watching your videos because it makes me aware of the things I should keep an eye on. You really make the repairs seem easy. This is a trait of a Master Mechanic! Keep up the good work!
@rhondacolwell6459
2 жыл бұрын
I need this done on my 2001 Tacoma 2wd.. Wish I could find a mechanic like him!!
@hawkenman.549
3 жыл бұрын
Thank you Sir. I have a 2000 4 runner. Your videos are excellent and I have learned much.
@freeamerican2313
2 жыл бұрын
I absolutely happy I came across your channel. Your very helpful especially being I have a 14 tacoma.
@jairopadilla1341
3 жыл бұрын
Thank You so much, my 00 Tacoma 4wd is doing the same thing, I came to get a tire rotation and the tech found the leak. I’ll get it fixed right away.
@williamgilbert9051
6 ай бұрын
Much thanks you are a great teacher
@dedysetiadi2851
3 жыл бұрын
You are the best! I’ve learned so much from you. I would like to meet you in person one day
@markreynolds3850
3 жыл бұрын
Thanks for the tip Peter enjoyed the video, thanks for sharing this information.
@randomdude8310
2 жыл бұрын
Doin this job for sure...like this week ;) Thanks for having great camera angles/focus on the seals that I need. I let mine seep for about 30k miles, but also had clogged axle vent when it started, and it only seemed to "leak" when it was like 100f or so. I'm in the middle of replacing the whole barke system on mine so it's time to deal with the rear axle seals, but a near fatal front axle seal failure made me finally take it apart and order new cv's, lower ball joints, and a whole new brake system (330k miles on it, I bought it at 267k). I replaced the suspension with a full old man emu setup/upper arms, when I bought it. So, I'm looking forward to watching your timing belt and valve cover gasket vids for my next phase ;)
@stevanrose7439
2 жыл бұрын
I removed the axle vent on my 2002 Tacoma and it went poof letting the pressure out telling me that it was clogged. I think I caught it soon enough before any other damage was done. Less then ten dollars is a cheap fix for the piece of mind.
@rudolphmadronich1467
3 жыл бұрын
Always great informative repair videos.
@gc1914
3 жыл бұрын
Nice and calm 👍 and I can understand the process. Thankyou 😊
@alanbloodworth2653
4 жыл бұрын
Genius! Thanks for posting this.
@rogeralvarado6060
4 ай бұрын
I love your videos great job I learned a lot thank you
@markreynolds3850
4 жыл бұрын
I did this repair on 1984 Toyota p/u 4 Ed . Seal was leaking , bearing was in good shape., replaced rear brake Shoes.
@kbob871
4 жыл бұрын
Out standing job my Toyota started leaking just a bit at 289000.miles on both sides lien brakes (all hwy miles no brake usage) part of maintaining truck I check vents and all fluids.had some minor missing diff lube but it may have been over full at factory you loosen fill bolt till drop formed then tighten. Put little in at 200000 but checked brakes that dust absorbed lots of oil. Thanks for your vid
@fredellis1247
4 жыл бұрын
Thanks. Great video angles and lighting. Problem solved.
@phuckmarriage1178
8 ай бұрын
Hi, loved the video. Perhaps u would know: can the differential fluid leaking out of the wheel cylinder cause the vsc and trac off lights to illuminate?I don't see it referenced in the service manual but after seeing this video it seems like it could be a possibility, no? I'm not sure if having those lights illuminated on dash(no CEL) will abort a smog check or not but it's coming up in December so I'm trying to figure it out before then. Thanks man, again: very thorough and precise direction, well enunciated qs well.
@ChanatorTDraven
2 жыл бұрын
You did an excellent jobs on Toyota cars, but please wear a safety for your eye protection. Just want you to be safe and keep up the good work.
@MrMannyjr69
Жыл бұрын
Thank you I just did mine... saved me some $$ ..
@TheJonesn
2 жыл бұрын
Great video...im a replace the brake shoe's kinda guy but hope the cleaning works
@dmax1234
2 жыл бұрын
Great video, thanks fella for the info.
@dominicbassis4462
2 жыл бұрын
Great Video. Can the passenger side be done the same way taking it out without taking the brakes apart. Thanks
@brianbumgardner8704
3 жыл бұрын
I hope you checked the differential vent, in many cases these are the cause of an axle seal leak.
@markreynolds3850
4 жыл бұрын
Thanks for sharing, oil filter trick interesting.
@ToyotaMaintenance
4 жыл бұрын
you are welcome
@garetthenriksen2409
Жыл бұрын
Very good video. Thank you
@kennethhamilton1513
Жыл бұрын
Great video! Thank you sir
@foldingchaise8387
3 жыл бұрын
Very Great Job, Thanks !!!!
@dalephillips8250
2 жыл бұрын
good careful work ...I like it.
@jeffsgarage1969
3 жыл бұрын
Thank you 🇺🇸
@davidschlesinger5523
2 ай бұрын
Inspiring!
@jesspos2402
4 жыл бұрын
Nice video. Is it desame procedure for a 2000 Nissan Pathfinder 2 wd
@michaelsmith2994
9 ай бұрын
I have put in two OEM driver axle seals. They are pressed in all the way. Just had the axles rebuilt by AAMCO. Made sure vent is not cloged and driver rear axle still leaks. Im wondering if its possible something might not have been built correctly on that shaft to keep causing the leak? This is on an 03 sequoia
@SparkySmith-rh5zz
6 ай бұрын
so do you not pack the seal with a little grease to keep the seal spring from popping out? I know you aren't whacking it too hard.... but as insurance?
@armandosalazar2560
9 ай бұрын
do you have to remove the transfer case cover to replace the axle oil seal?
@SteezerZimmer
4 жыл бұрын
Thank you for your videos, I really appreciate them. I have a question about blown axle seal. I think my driver side axle seal is leaking but it is hard to tell. I took off my drum and I definitely have some wet stuff in my drum and in my bake area. but also, which I have-not seen anywhere on the internet, but the backing plate (facing towards middle of truck) is completely covered in grime and dirt while the passenger side backing plate is completely clean. is this a common symptom of axle seal leaking?
@JLeeChron
Жыл бұрын
Yes
@jdoe265
5 жыл бұрын
Still waitin' on that slip joint/ u-joint greasing video for Tacomas and 4-runners.
@ToyotaMaintenance
5 жыл бұрын
hopefully coming soon
@jdoe265
5 жыл бұрын
@@ToyotaMaintenance Yeah, I think synthetic grease is necessary to prevent the slip yoke clunk.
@flores8051
2 жыл бұрын
Thank you good job. I wish you would of put more light .
@billharvey5162
5 жыл бұрын
Hey man can you do a video on 3rd gen 02 4R/tacoma crank pulley sensor/key on crankshaft loose causing misfire
@terenceyoung7949
3 жыл бұрын
I have a 2010 Toyota RAV4. Are you in the state of Alabama?
@fredycueva4013
3 жыл бұрын
Hi, Have replaced needle bearings on toyota tacomas?
@greyphantome2617
2 жыл бұрын
Great video, thanks. Do you need to remove brake lines and bleed the brakes when reinstalling?
@JLeeChron
Жыл бұрын
Yes you do
@juanmorales62
3 жыл бұрын
Can you please help me ? by letting me know if the rear oil seal would work on the front passenger side on Toyota tacoma 2002 thank you.
@MrCalifornia1234
5 жыл бұрын
Torque spec is good and tight.
@ToyotaMaintenance
5 жыл бұрын
agree
@trevorfroese4534
5 жыл бұрын
German measure of medium arm strength?
@56cote
4 жыл бұрын
Would thus be the same for a 2009 2wd Tacoma?
@94Whiskey
3 жыл бұрын
Do you also perform surgical operations and childbirth delivery in your garage? Great video btw!!!
@jackmariano5681
5 жыл бұрын
Thank you. Informatve
@ToyotaMaintenance
5 жыл бұрын
you are welcome
@user-yk4oq4wz4d
8 ай бұрын
where are you from originally?
@frankflores1917
Жыл бұрын
What is the part number for the dust seal? I cant seem to find it
@stephenzies8867
8 ай бұрын
A lot of The Seal Leakage I've Found is Because The Diff Vent Is Blocked
@Lilglitz
5 ай бұрын
Would this be the same on a 1998?
@richardramon2175
Жыл бұрын
Sorry Eric for being late to the party. Can you tell me what the symptoms were that guided you to replace the oil seal?
@JLeeChron
Жыл бұрын
Gear Oil from the differential will leak and saturate the brake drum/ components and leak on the backside of the wheel. You can smell it when near the back wheels- and gear oil will be present on the back side of wheel and tire
@pac5709
2 жыл бұрын
whats the part number or size for the o-ring?
@alexluna5460
4 жыл бұрын
How much quarts of differential and or gear oil did you use to make up for the lost oil before the fix?
@peterlindvall7671
Жыл бұрын
Gear oil, and you pour it in until it comes back out the fill hole. If you haven't changed it recently, you should change now, instead of just topping it off.
@Amezaing
3 жыл бұрын
How much does something like this cost
@tomveith2540
5 жыл бұрын
Thanks for the video. My guy thinks he has to replace the bearing and inner seal as well. Is that true the car rides fine and doesn’t make any noise ? I have a 96 Tacoma 4x4
@tomveith2540
3 жыл бұрын
Kirt Barton you do have to do the bearing I found out . Bearing was ruined
@tlope5642
2 жыл бұрын
Links to the parts?
@TimmyTheToolman
5 жыл бұрын
Hello my Toyota Maintenance friend. I responded to another one of your videos regarding the rear axle seal job on a 3rd Gen Toyota 4runner. The same issue I mentioned in that video holds true for 1st Gen Tacomas. The seal was redesigned by Toyota sometime in the past. By simply replacing the seal and not addressing the mating of the retainer with the seal, the seal lip will barely be riding on the polished shoulder of the retainer. When we did this job on a 3rd Gen 4runner with a non-ABS rearend, we determined it was pretty much mandatory to flip the orientation of the retainer (bevel facing the bearing) in order to get a good mating between the retainer and the seal. This video details what I'm talking about: kzitem.info/news/bejne/141om5ysiHZ5lqg
@ToyotaMaintenance
5 жыл бұрын
Thank you for sharing this with Toyota Fans.....
@CHIGAMAFIAGAMING
2 жыл бұрын
I’m the owner of the vechile now evolve into a beast
@stevanrose7439
2 жыл бұрын
🎊👍👍👍👍👍
@adampowell576
Жыл бұрын
My Haynes Repair Manual says to torque those bolts 44 to 57 ft-lbs
@alfredopaez9097
5 жыл бұрын
👍👍👍👍👍❤️❤️❤️❤️❤️
@ToyotaMaintenance
5 жыл бұрын
Thanks
@Airman..
4 жыл бұрын
Bro you should of checked the wheel bearing runout while you were there
@alekseykashubin5489
4 жыл бұрын
Louie ck looks like you.But not as good or as smart. nice work!
@realitynow4342
3 жыл бұрын
Where is your shop?
@ToyotaMaintenance
3 жыл бұрын
Arcata CA
@RootsMusic-ek5nc
3 жыл бұрын
I wish I could find a mechanic I could trust to do this for me, Mine is leaking on one side, Don't you need to repack the axle bearings or even replace the bearing while its off
@mikeriemann8799
5 жыл бұрын
My Tacoma is 2 years younger.
@ToyotaMaintenance
5 жыл бұрын
nice
@hunterharison
2 жыл бұрын
for cleaning start using toothbrush ...it's a toyota!
Пікірлер: 98