very helpfull video Do you know if can be wired another easy mesh router from a satelite router ??
@nurussaboor105
6 ай бұрын
Umm yes it's very much possible. In my current configuration, I have two Archer C64(s) and one TL-WR820N, where, one of the C64 is the Primary router, and the other C64 is wirelessly connected via Easy Mesh as satellite, and the TL-WR820N is connected to the satellite C64 via ethernet patch cable to work as the router for all my 2.4 GHz IoT devices, so that the main and satellite routers are free for other devices. Hope that answers your question.
@samueltotesautt6964
4 ай бұрын
Which has better speeds in both 2.4 Ghz, 5 Ghz and LAN, this C64 model or the Mercusys MR50G?
@Niojar
4 ай бұрын
It seems that not much bandwidth is lost as in a conventional repeater, I currently have an archer C80 compatible with EasyMesh, I extend my network with a repeater that only delivers half the bandwidth and I was thinking of upgrading my network with an AX55 and then leave this C80 as a satellite Do you think that half the bandwidth is not lost?
@lzimolong
Жыл бұрын
connection between the routers (backhaul) via network cable (ethernet) or via wireless?
@jannur7777
8 ай бұрын
Either
@AkshayKumar-fm6yc
2 ай бұрын
Hi informative video, can you please advise how to access satellite routers web management page as I am not able to access my satellite router web management page.
@piyushshastri5206
Жыл бұрын
What about guest network mesh ??
@sabeen162
Жыл бұрын
Sir plz omaan m ager bachy ka admition college m krwana ho Pakistani college to kitna kharcha ho gaa?
@terabox-b1d
Жыл бұрын
My Router again'and again restart automatically problem. Can you solve please again and again restart after 1min 😔😔😔
@dungaroolal
Жыл бұрын
If the main router has a Guest Network, then satellite router would also have the same guest network settings?
@jestonipoe
Жыл бұрын
Unfortunately nope
@redmigalaxy6878
9 ай бұрын
Once the easymesh setup done. Turning the Guess network will work only on main router. The satellite router, guess network is not available. You need to remove the satellite router on main router and add it again after guess network is ON
@Lucas_Pilan
Жыл бұрын
What's your internet's speed?
@buikemm
Жыл бұрын
What's the highest distance an added mesh router can be from the main router? I want to keep one of the mesh routers (in another building) 100m from the main one (in main building)
@nurussaboor105
6 ай бұрын
Umm bridging a 100 m distance won't be possible via wireless mesh. The Archer C64 covers 2,500 square foot, which equals to about a 25 to 30 foot radius from the router (in perfect conditions, in other words the 25 foot radius lessens due to obstacles like walls and such and also interference from other neighboring Wi-Fi networks. According to TP Link, a satellite router should be placed at the 50% or 75% of the coverage radius of the primary router, hence a 100 m wireless won't be possible via this model. You could search for routers with high gain, or consider a directional antenna type solution. But an easy way to bridge the 100 m gap would be to get a unmanaged network switch (a common 4 port unmanaged network switch would do the trick), and two 15 or 20 m (45 or 60 foot respectively) ethernet cables. All you'd need to do then is place the network switch at a convenient location in-between the two buildings and connect the two routers via the ethernet cables.
@van828
Жыл бұрын
Can easymesh work via cable backhole?
@redmigalaxy6878
Жыл бұрын
Yes backhole support with 1000mbps link speed
@van828
Жыл бұрын
@@redmigalaxy6878 don’t you know how to set it up?
Пікірлер: 21