This video has been helpful and as a result I have been able to get rid of “Flat Tyre” using this process. However, the yellow TPMS light within the speedometer area is still on. Is there an additional step I need to do? Any help would be appreciated.
@yo2mkt
Жыл бұрын
tnx. it,s working!!
@joebucara3656
2 жыл бұрын
Thank you!!
@1importedguy
3 жыл бұрын
Thank you so much
@davidosborne5057
5 ай бұрын
Why did you not also have the small yellow tpms icon originally lit in the beginning? Was the bulb pulled? I did your procedure and with the tl.s module fuse pulled the small icon remains
@dmitrychernykh5385
3 жыл бұрын
Awesome thank you
@enp4641
2 жыл бұрын
I have the same problem in a 2011 Sharan 7N1. Do you think that following your same procedure I can get the light to turn off? it's driving me crazy
@DZGunner
Жыл бұрын
I just tried this and wasnt able to get the light to go away. The only difference i noticed is my dash has a color screen to it, so slightly different, but still a 2004 4.2. Am i supposed to scan all the modules after to get it to not recognize it?
@vwjustfixit4843
8 жыл бұрын
Yes because it won't recognize anything pertaining to the TPMS. I would clear the code first before deactivation.
@michaelvergult
7 жыл бұрын
Terry Hightower Guy Volkswagen would it work whit a vw jetta 2008 ? greetings
@joshpeterson502
6 жыл бұрын
Can you take battery cables off and reset it that way?
@LaDieselTV
8 жыл бұрын
Flat tyre is the code im getting will this trick also eliminate my code?
@vwjustfixit4843
8 жыл бұрын
La Diesel not sure if I replied back to you if not sorry. Yes this will fix the flat tire issue. It's the same module.
@georgei.t.8325
5 жыл бұрын
Can i do this at phaeton 2007?
@joshpeterson502
6 жыл бұрын
I have that problem right now. And it stuck in park. So should that take care of that problem?
@vwjustfixit4843
6 жыл бұрын
Josh Peterson this won’t take care of being stuck in park. That might be your brake switch
@dyremk1
3 жыл бұрын
I didnt get it. Everything stays the same and the light still goes away?
@edenfijd
3 жыл бұрын
Because the fuse was pulled, there is no power to the module. When you accept the coding, it rescans, and since there is no power, there is no module (to the vehicle).
@chriss377
5 жыл бұрын
I did this. Code went away. BUT so did my remotes. Pressing the buttons on the key fob does nothing. I have to unlock with the key then start it right away or the alarm goes off!
@vwjustfixit4843
5 жыл бұрын
Chris S strange! You must have other issues or you did something wrong
@chriss377
5 жыл бұрын
@@vwjustfixit4843 I followed your instructions exactly. However I had pulled some fuses for the radio/phone stuff to stop my car from having a battery drain. I also disabled the KESSY antennas by unplugging them in the doors. All that was done months ago though and it worked fine. It looks like when I did the TPMS disable that I somehow lost "remote adaptation" in the VCDS for the keys. Like somehow that module didn't have power or whatever when I ran this so it got deleted too. What I've learned so far is it could be a dealer only fix, as the dealer has to go in an reenable remote entry.
@vwjustfixit4843
5 жыл бұрын
Chris S By doing the TPMS disablement this way doesn’t have anything to do with Kessy mod. Unless you did some experiments. The Kessy has information stored for the keys and doesn’t just loose completely by resetting the CAN. You’re issues are more than likely to be from water under the drivers side carpet causing your problem. Put all your fuses back, plug in the antenna’s then reset the CAN. Does the vehicle start? Did you do a full scan on all mods then print it?
@chriss377
5 жыл бұрын
@@vwjustfixit4843 The KESSY shows no codes when I scan. MY issue started with a constant battery drain that got to the point of having to charge it every night. Alternator works fine. Battery is VW and 4 months old. I found the root cause to be the radio (common problem). I did the TPMS disable. Then I scanned the codes of which 90% or more were low voltage related, so I erased them. Since then the FOBS don't lock or unlock the car. There is no "remote control adaptation" function in the 46 module. There should be. I am concerned that when I ran adaptation for the TPMS it ALSO disabled remote entry. It's not necessarily a KESSY issue, it's a remote FOB issue. Unplugging the door antennas is a common workaround for a KESSY with blown diodes (symptoms: clicks, "shift to P", etc) The KESSY can also cause a battery drain. The point here is I had various fuses out for months trying to diagnose. Discovered it was the radio last week finally. So today I pulled the TPMS fuse, ran adaptation. Scanned then cleared codes. Since then, no remote FOB. I can post before and after code scans. Only one code right now, air quality sensor is bad.
@vwjustfixit4843
5 жыл бұрын
Chris S try module 05 for the FOB reprogramming.
@BoscaMarius
5 жыл бұрын
Why deactivation and not make it work ??? I would rather make it work like it should 💪 , instead of taking the fuse out and deactivate it from the car 🤕
@vwjustfixit4843
5 жыл бұрын
Bosca Marius some people like to use winter wheels and tires without the TPMS light staying one. Then there are several people who don’t want it at all. You would be surprised how many people want me to deactivate TPMS on VWs
@BoscaMarius
5 жыл бұрын
@@vwjustfixit4843 Damn, I found it weird But yeah, people preferences differ, so yeah, their choices.
Пікірлер: 34