Stop snapping your fingers makes for a terrible presentation And Long makes a better boat but tracker has the better package and price
@PhilosophyDaily
4 жыл бұрын
Elwood Neener Thanks for watching!🔥
@paulvantries7013
4 жыл бұрын
BOOM Simple as that !! Well said !
@campaul8366
4 жыл бұрын
Lund is far superior in every way. Lifetime warranty nuff said. Its like your comparing a mako to a contender. You favor tracker because you own one. Biased review.
@PhilosophyDaily
4 жыл бұрын
Cameron Flinchum Thanks for watching!🔥
@paulvantries7013
4 жыл бұрын
Thats a fact Well said !!!1
@billdobbr4562
4 жыл бұрын
I couldn’t make it past the third finger snap. Terrible. One of worst video starts I’ve ever seen.
@PhilosophyDaily
4 жыл бұрын
bill dobbr Thanks for watching!
@JGFowler121
2 жыл бұрын
#4 I agree with you that welded makes sense cost wise on a bass boat but when you get into a Deep-V you want the flexibility of aircraft grade rivets so you don’t crack welds with the big waves.
@brockrenshaw7519
4 жыл бұрын
Rivets are actually stronger welds weakens the metal and I weld so I would know
@PhilosophyDaily
4 жыл бұрын
Brock Renshaw Thanks for watching!🔥
@keithsiegel5769
4 жыл бұрын
Thanks expert
@PhilosophyDaily
4 жыл бұрын
keith siegel Thanks for watching!
@calebh2642
3 жыл бұрын
Been comparing the v16 super guide vs the 1650 angler. The lund is cheaper, wider, has more rod storage, better resale and for me the most noticeable difference was that I felt like I sat "in" the lund where as the shallower tracker I feel like I sit "on" it. Just my 2 cents. Haven't pulled the trigger on either yet
@schmidtsvids4343
3 жыл бұрын
Lund all the way
@reellife7295
4 жыл бұрын
Uhm well I own 3 lund boats 2 of which are 35+ years old and have been piss pounded the shit out of for thousands of hours.....no leaks there is a reason why they use rivets instead of welding and back it up with a lifetime warranty. When you beat on welded boat all the stress is put on beads of welds and will crack were rivets will out hold out much longer before popping. I’ve been 30+ miles offshore and got caught in 12ft waves against me and safely made it home without anything happening (more scared of smoking the 4.3 merc wide open over one wave reversing at the top) and that’s why I’m a believer in lund and everybody is in the Midwest. 80% of all the guides here in Minnesota run Lunds. My only complaint is that my 21footer has pin holes of rust in the transom from when it was ran in the Bahamas when it was new 20 yrs ago
@bababuoy7979
4 жыл бұрын
Tracker is the dollar store Lund!
@TheVasMan
4 жыл бұрын
That is what I thought too when he said that. I don't know which is stronger, rivets or welding, but I have a Lund that has been pounded on Lake Michigan for 30 years and it is still watertight.
@billsutherlin3060
4 жыл бұрын
Why are jets rivited instead of welded? Because it stronger.
@ddm62571
4 жыл бұрын
@@billsutherlin3060 The U.S. Navy builds ships with all-welded construction. Most in back in the day were riveted? Why they change? Oops! If a riveted boat hits a rock, it can blow dozens of rivets, but a welded boat will only be dented. A simple but effective argument in favor of welding is, Why drill hundreds of holes in a boat and expect it to float?
@jerrytkaczyk7372
4 жыл бұрын
Well the older navel boats had stronger hull designed with rivets. If you strip a modern navy ship of its technological weaponry; the battle ship from ww2 would just run its ass over and keep going
@3Szczupak
4 жыл бұрын
Rivets are better than welds. Welds can snap/crack faster than having rivets break on impact or under tension. Riveted boats cost more cause they take longer to make and withstand greater impact. I mean i can see where you would think that welds are stronger cause buildings structural steel are welded and bolted now over rivets but thats steel. Aluminum weakens around the weld area. I know cause I've welded for fabrication shops in the past and have done tests in civil engineering college on tensile strength and breaking strength cause i was interested in it myself and rivets do come out to be better.
@rds990
3 жыл бұрын
If you have ever been on BIG water, you'll know that boat hulls and decks etc, FLEX. Waves are ferocious stress on a hull. Welds are very strong for static loads....those that don't come and go. But for the ability to flex, rivets in aluminum are far superior to welds in the same surface, only because a riveted surface can FLEX without cracking. It's why you find welds on some aircraft part, but NOT the wings, fuselage etc. Wings must be able to flex and a weld there would be catastrophic over time. Boat hulls are similar. Lund boats are priced high...yes they are. And Trackers are priced economically. That's all known. But trade one in or sell it, and then figure your return as a percentage of purchase price. Hands down, the Lund holds value and sells almost immediately. It's because folks know, Lunds are pricey, but of EXTREMELY high quality.
@jonnyspeed
2 жыл бұрын
Couldn't have said it better myself. Rivets can be easily replaced if you pop one vs. redoing welds.
@akaitsmedre
3 жыл бұрын
I've owned three new basstrackers fishing boats over 30 years and the first two were riveted. My first riveted boat would slightly leak after 8 hours on the water but it wasn't a big deal. Resale was great on all three boats. Good video son. Don't pay attention to the keyboard commando haters.
@rds990
Жыл бұрын
Explain to me then, why that Boeing 757 you took to California last week was RIVETED.
@andrewkramski9718
4 жыл бұрын
Tonight when I go to sleep, I will be hearing finger snaps and claps from this gentleman's video. He's consistent and brutal with them. At the very end of the video, you start to wonder about the lack of the snaps..this is a trick...the snaps are still there...and then you go out and buy yourself a boat.
@PhilosophyDaily
4 жыл бұрын
Andrew Kramski Thanks for watching!🔥
@NytronX
4 жыл бұрын
Comparing Tracker to Lund is like comparing a Geo Metro to a Rolls Royce. This is literally one of the worst videos I've ever seen in KZitem history.
@PhilosophyDaily
3 жыл бұрын
Nytron Thanks for watching!🔥
@lukelackermayer
4 жыл бұрын
becomes boat salesman at bass pro," hi how can I help you all today? Righty over here snap snap we have a family boat that has a engine snap, a trailer snap and you get me snap. Also here is the niiiiiiiiccccccce price check... I mean snap.
@PhilosophyDaily
4 жыл бұрын
Luke Lackermayer Thanks for watching!🔥
@JS-sh3nq
4 жыл бұрын
Had a 2001 Lund Tyee. Good boat but was not impressed with the quality. People think Lund is the best. I’ve been looking at the Tracker V19 Tournament and the build seems much better. Definitely heavier aluminum. Had to send the Lund boat back to the factory because the rivets became loose on the transom. I will not get another riveted boat again. Just nervous about the rivets after that experience.
@PhilosophyDaily
4 жыл бұрын
JS1 Thanks for watching!🔥
@JS-sh3nq
4 жыл бұрын
Also watch PK from Oregon Life on his new Lund boat. He explains his concerns
@rds990
3 жыл бұрын
Good luck with that warranty work at Bass Pro !! Bet your Lund service was handled great....right ?
@JS-sh3nq
3 жыл бұрын
@@rds990 The work was actually prorated based on the age. I went with a 2020 V 19 Pro Targa because it has a lifetime hull warranty that includes its transom. I thought I’d give it a try. I’ll have to wait until it needs warranty work to see how they handle it.
@schmidtsvids4343
3 жыл бұрын
@@JS-sh3nq tracker won’t last 10 years like that lund
@centralcoastcamper9631
Жыл бұрын
Every Bass Tracker I've owned had riveted construction. They leaked a little but not much. That constant snapping was annoying as heck!
@robertj5663
4 жыл бұрын
Tracker doesn’t include a spare tire on all their boats/trailers... also a 1775 Renegade can come with a 90hp motor over the 175 which is maxed at a 75hp. Lund also has a much bigger console to flush mount a larger graph/fish finder where as you’re stuck with a side mount on tracker. There are some trade offs but 23,9 for a 1775 with a 90hp motor and vinyl floors to me is worth the extra money over a 175 txw for 21,295 that comes with a 75hp and mainly carpet as vinyl is an up charge from Tracker vs Lund is either or. Also Lund has a 95” beam vs Trackers 89” beam which provides larger front casting deck and better stability.
@PhilosophyDaily
4 жыл бұрын
Robert Sciandra Thanks for watching!🔥
@kyledelrosario4619
4 жыл бұрын
Good video tom 🔥🔥
@PhilosophyDaily
4 жыл бұрын
Kyle Del Rosario Thanks for watching!🔥
@Jay-bp9bh
Жыл бұрын
Just wondering if you've done your rivet research yet?
@Vabasseroutdoors1
4 жыл бұрын
Great review, been looking at the tracker grizzly 👍
@PhilosophyDaily
4 жыл бұрын
Vabasser 1 Thanks for watching!🔥
@Vabasseroutdoors1
4 жыл бұрын
BucketMouthBass 👍
@brodyferguson7270
4 жыл бұрын
We run a 2018 bass tracker 195 with a 150 hp merc by far best boat we’ve had goes a lot better on the waves out here on Toledo bend than our old 17 foot express boat!! As always good video!!
@PhilosophyDaily
4 жыл бұрын
Brody Ferguson Thanks for watching!🔥
@curtismitchell1431
2 жыл бұрын
Pretty sure the 1775 renegade comes with a 90. Not a 50 lol
@isaiahwinfrey5541
4 жыл бұрын
You are a psychic i bought a tracker boat last weak dude!!😂😂
@PhilosophyDaily
4 жыл бұрын
Isaiah Winfrey Thanks for watching!🔥
@_Jake5642
4 жыл бұрын
hey where are my weekly vids bro?! you have a lake in the neighborhood LOL
@schmidtsvids4343
3 жыл бұрын
1 you are wrong about four the riveted lund would last longer two lund comes with 10 color schemes three Lund has better storage four lund is a way better quality five I’ve seen multiple trackers will holes in them and six you are so bias about your tracker
@bcroft68bc
3 жыл бұрын
Give me a weld over a rivet any day. And NO, a weld does not weaken aluminum.
@PhilosophyDaily
3 жыл бұрын
Thanks for watching!🔥
@schmidtsvids4343
3 жыл бұрын
Give me lasting more then 10 years on riveting any day
@bcroft68bc
3 жыл бұрын
@@schmidtsvids4343 you know what? You and I debating rivet and welds or which name brand of boat is best, is actually ridiculous. If you have a boat, then congratulations you’re on the water and you’re fishing. I personally own a Tracker pro 170. It’s only 16ft 8 inches, but it’s my boat and it puts me on the water where I can fish. Would I take a riveted Lund or any other name brand riveted boat? Yes I would. My goal is to one day own a RT198P aluminum Ranger. I really don’t want a fiberglass because they’re out of my price range and too expensive to keep up. Once again, if you have a boat, then congratulations, you’re fishing. Keep the lines tight.
@prestongranillo2736
3 жыл бұрын
Basically this is what I got from watching this video... if money were no issue for you, then you would own a Lund.
@CopenhagenBlack420
4 жыл бұрын
Bro you are going to make like $10 off of each video, do us all a favor and get rid of the 9 ads you have placed in this video.
@philnye6039
3 жыл бұрын
commercial airplanes are riveted.
@rds990
Жыл бұрын
Maybe THIS will help in understanding why rivets are better for stress situations where boats are twisted and banged by rough water. Welds ARE indeed strong for static (non-moving or non-flexing) items. But boats flex constantly. kzitem.infocm0qrjp7Z8o
@jskoutdoors7640
4 жыл бұрын
awesome video
@PhilosophyDaily
4 жыл бұрын
JSK OUTDOORS Thanks for watching!🔥
@TmarkHigg-br4kw
6 ай бұрын
Locked down...move South.. Rivets are much stronger. You don't know what your talking about. Commercial Airplanes have rivets.
@rick4649
4 жыл бұрын
I cannot believe I watched this video. BucketMouth, your antics are very irritating but I like the content of your video.
@PhilosophyDaily
4 жыл бұрын
Rick Frazier Thanks for watching!🔥
@jerrytkaczyk7372
4 жыл бұрын
LUND baby
@PhilosophyDaily
4 жыл бұрын
Jerry Tkaczyk Thanks for watching!🔥
@bingostar9207
Жыл бұрын
Any time I see a video with a guy making a face like that I skip it cause I know it’s a waste
@milanradic9800
4 жыл бұрын
Did you ever flew in welded airplane...guess not...buye😀
@PhilosophyDaily
4 жыл бұрын
Milan Radic Thanks for watching!🔥
@johntalbert8890
4 жыл бұрын
Well said. This young man needs to research how welding aluminum changes the tinsel strength of the metal. Several reports are out there about Tracker boats cracking around the welds.
@rds990
3 жыл бұрын
@@johntalbert8890 Tinsel is on a Christmas tree....tensile is a measure of metal characteristics. In concept you are correct however.
@tylersadar8742
3 жыл бұрын
Stop snapping
@divemaster7600
5 ай бұрын
Can’t handle the snapping dude. 👎🏻
@anthonyroelofs4700
2 жыл бұрын
Kinda a bias video and those snaps gotta go
@rwknight110
4 жыл бұрын
Please stop snapping your fingers. It's incredibly annoying.
Пікірлер: 89