Head banging stuff, well done, thanks. My first route will be for diesels!
@cActUsjUiCe92
9 жыл бұрын
Bob Hatcher Can't say I blame you. It's a huge pain in the ass.
@FlightGamingHubExtra
2 жыл бұрын
Thanks this really helped
@DaedalEVE
7 жыл бұрын
I usually HATE vids mads by kids, but you did a good job on this. You really seem to know the program well.
@r3playretro
Жыл бұрын
Thank you!
@hooliganarfza15
Жыл бұрын
Great video mate, would have loved if you showed the pantograph actually hitting the contact wire, instead of showing it from the cab view. Also wish you showed the RW tool effect, do you have this problem because you’re using the british catenary for an American locomotive?
@thetrainsrock
7 жыл бұрын
good video. im having issues with doing this. i have the Steam version of the Wherry Line. Norwich station is electrified but the rest of the line isnt (which is real). however, i want to make the rest of the line electric for my own use. ive tried placing gantries and wired them all up with the tool but still im getting nothing with an electric train when i get out of Norwich station. is there a simple way to fix this?
@ElectricMotive
7 жыл бұрын
you need to set the track type as Electric Overhead wires
@Oscar-lp6zd
9 жыл бұрын
Your good at building nice vid good look on your channel!
@RyanFRails
7 жыл бұрын
I did the same thing with my Sherman Hill track, and I got no overhead wires
@davidclark8473
4 жыл бұрын
Not sure why but your signalling tutorial is blocked in the UK, any way this can be fixed?
@garrypeacock3907
8 жыл бұрын
After a lot of clicking I have worked out what the problem is. I have laid the track over RWDecal and I cannot get the window to appear. Delete the Decal, or place track on plain ground, and the window will appear.
@vishalpatelful
4 жыл бұрын
Why signaling video have geo location block?
@garrypeacock3907
8 жыл бұрын
Hi BrandonI learnt a lot from watching your tutorials. But I cannot work out how you got the angle box to come out at 21 minutes into the video. You select the track, appear to line the mouse up just off the red arrow, and a window pops out on the right of the screen. How do you get this to appear?Garry
@cActUsjUiCe92
8 жыл бұрын
Double click the object
@garrypeacock3907
8 жыл бұрын
I select the catenary pole then double click, out pops the window.But when I select track and double click, no panel!!
@ctrailfan3729
8 жыл бұрын
Do you know any way to contact the Gamemakers to ask them this question?😓
@cActUsjUiCe92
8 жыл бұрын
contact their support. i think it is dovetailgames.kayako.com or something like that
@augsnow2067
2 жыл бұрын
How long is the track length by feet?
@PhonyGamer-po8ci
8 жыл бұрын
thank you this is awsome
@cActUsjUiCe92
8 жыл бұрын
You're welcome!
@ctrailfan3729
8 жыл бұрын
Thank You cactus juice
@reedspacer558
6 жыл бұрын
How can I had different types of trains one one route? In the Marias Pass I can only place an es44dc and an sw1500. I have purchaced other types of units so how can I place them?
@omchantal69
4 жыл бұрын
go to enable dlc thing (you can find that in other toutorials) and chose these what you want
@sebi01200
5 жыл бұрын
Im using M8s and the pantograph goes right through the wires. Any tips?
@StefanWithTrains3222
2 жыл бұрын
Watch the video
@masterd1612
9 жыл бұрын
For some weird reason when I try to teleport it just takes me from green grass to green grass. Can you tell me how to fix this?
@cActUsjUiCe92
9 жыл бұрын
Dominic Ureño Is this a new route you are making? If so, all routes start as a blank slate.
@masterd1612
9 жыл бұрын
Yes.
@masterd1612
9 жыл бұрын
Oh.
@JustinCastleberry117
9 жыл бұрын
I can't figure out how to get the RW Tools to work. It says it's missing some file or component. I tried reinstalling it, but it doesn't go away. I went as far as to reach out to the creator of it and he couldn't help me. All I need to do is to make Route Markers!!!
@cActUsjUiCe92
9 жыл бұрын
Yea it sucks you have to download these .ocx files and register them with the command line. I forget where to get the .ocx files but do some google searching. good luck
@JustinCastleberry117
9 жыл бұрын
Thanks for the help man. I got the ocx files and the program is running. There are other missing ocx files as I go into its other tabs and use them, so I've been downloading a lot. And I also need to figure out how to use this program, I have no idea what I'm doing lol
@shivanshumay05
8 жыл бұрын
I have laid out some tracks with electrification set at None, but I want to change it to Overhead Wires (without deleting the tracks). How can I do it.
@cActUsjUiCe92
8 жыл бұрын
You have a couple options. 1) Select the track manually with the Select tool and change the electrification type to Overhead Wires. 2) Use RW_TOOLS to do a mass replacement of the electrification type in the files. Option#2 is a lot easier but you need to know what to look for in the .bin files. Good luck.
@shivanshumay05
8 жыл бұрын
cActUsjUiCe thanks
@boogermother5000
7 жыл бұрын
select tool
@bali2516
13 күн бұрын
@@cActUsjUiCe92 How exactly do you use RW tools to do it?? I spent time changing the electrification on all my tracks only to have the game crash just when I was almost done.. I was ready to throw my pc off a cliff
@ctrailfan3729
8 жыл бұрын
hi I got rw tools now how do I use it?
@ctrailfan3729
8 жыл бұрын
There has to be another way without using RW tools. Then how did the Gamemakers do that without using RW tools?
@cActUsjUiCe92
8 жыл бұрын
+kenobi ford That's an excellent question. They must have some kind of internal tool or method that they didn't release to the public. Either that, or they are manually adjusting gantry height after placement.
@OvercookedSteak
5 жыл бұрын
errr i think i HAVE TO have catenary because withought catenary my electric trains dont move
@StefanWithTrains3222
2 жыл бұрын
You don't have too you just need to eneable overhead wires
Пікірлер: 44