The World needs more Tokutubers! Awesome work man👍
@EndyTg
2 жыл бұрын
So much passion & love, u deserve alot more attentions
@TheNextDecade
2 жыл бұрын
Thank you! I dont want the attention as much as I want more Kamen Rider cosplayers out there. But I wont discourage people sharing the videos either, so again, Thank you very much~
@trevorstiles1008
2 жыл бұрын
I needed this video years ago thank you for making this you are a god send
@TheNextDecade
Жыл бұрын
Glad I could help! Thank you for watching!!
@leotanaka4878
2 жыл бұрын
Awesome project! Really like watching your KR videos.
@TheNextDecade
2 жыл бұрын
Thank you! I have more KR focused content coming later in the year, I'll try to squeeze in one more regular vid in there somewhere. Thanks again for watching!
@anternet104
Жыл бұрын
Is there a full list of all the materials you need to construct the helmet, like aside from the things listed in the vid
@TheNextDecade
Жыл бұрын
I'm pretty sure we mentioned everything but the more unorthodox stuff I used: 2 Radio antennae 2 2-Liter soda bottles Foam Mesh Cupboard liner Hot Glue a Baseball cap and lastly the tattered remains of my hopes and dreams. That should bout cover it.
@Fangelion
2 ай бұрын
Hi love your video, one question is it A4 size paper for print?
@TheNextDecade
2 ай бұрын
Hi! It should be scaled to work on Letter and A4! Just abjust your print settings to match your paper and you should be good to go.
@marcodabatman
Жыл бұрын
Late as heck on this one but I couldn't find it in the video, did you ever mention what head circumference/head size this pattern is for? Thinking if I should scale it down when I print it because I might have a smaller head
@TheNextDecade
Жыл бұрын
its a lil big, so if you scale it start at 95% and work down from there. i recommend building it in paper first to save on the expensive materials
@marcodabatman
Жыл бұрын
@@TheNextDecade Apologies for the late reply, but was the pattern in this video printed at 95%? or at 100% and that's why you're recommending to scale first at 95?
@e-convoy1783
2 жыл бұрын
I now really want to know how to make the Ichigo body suit! And if possible, Classic or Shin Ultraman?
@TheNextDecade
2 жыл бұрын
Until I am more confident in how I show yall how I sew things, I wont be sharing clothing patterns. But I will be working on a simple Rider/Ranger jumpsuit pattern for the show!!! In the meantime, There are great suit makers out there, you just gotta be very clear about what you need!! Also, watch Episode 2 and 4 CLOSELY for a free secret pattern to help with Kamen Rider Ichigo and Nigo cosplay~~ Next Project is a classic 66 Ultraman mask!!
@e-convoy1783
2 жыл бұрын
Okay, which mask? A type, B-type, or the C-type(common for modern incarnation). I also want to ask you, have you tried to do an older Super Sentai Show like Goranger, or (my personal favorite) JAKQ? Or for maybe Hawaii fans Android Kikaider?!
@user-pm4tt2yr5w
Жыл бұрын
楽しいぞダス😂
@nickthehatmansmoviehouse2538
10 ай бұрын
How big are the eyes supposed to be? Like the holes for the bug eyes? Cuz ive tried to find the dimensions of the original mask and nothing came up
@TheNextDecade
10 ай бұрын
Thats the thing, they kept changing size in the show too. I feel i made the ones on this pattern a lil small, but IIRC the eyes ar a 3"x2.25" oval with a 1" depth on the dome of the eye. hope this helps!
@nickthehatmansmoviehouse2538
10 ай бұрын
@@TheNextDecade cuz im trying to be like the a type mask for my cosplay. Ik it wont be perfect but I just wanna make sure i got the scale right to fit my head
@thespectacularspider-man2549
2 жыл бұрын
Let's go! Finally, what we've been waiting for.
@TheNextDecade
2 жыл бұрын
A new Episode launches tonight at 6 est!! Thank you for watching, I appreciate the excitement!
@PrysmaFandubYT
2 жыл бұрын
I love it!!!!!!!!
@TheNextDecade
2 жыл бұрын
Thank you! More on Tuesday!
@lykarn
Жыл бұрын
Is the size of this helmet is free size? Just worry that if i did print it out, it won’t fit to my head.
@TheNextDecade
Жыл бұрын
This helmet pattern file is a PDF. If it is too big or too small, you can go into your print settings an resize it under "Scale to". If you want bigger or smaller, Move your percentage 2.5% up or down, and keep trying till you find a size you like. I made this file a little large because most people complain that my helmet patters are too small. Now they say this one is too big. Where are the three bears when you need them?! Best of luck finding the right size that fits you. Be sure to tag us on twitter or instagram if you finish your helmet! @TheNextDecade Thank you for watching too! It means the world to me!
@OliveAbyss75719
11 ай бұрын
Pardon me, mister guy, what thickness foam is needed?
@TheNextDecade
11 ай бұрын
hi it's me, mister guy. You can use 4mm-6mm thick foam for this. you could use thicker foam too, but you may have to do more work to get the right shapes out of them. Best of luck!!
@OliveAbyss75719
11 ай бұрын
@@TheNextDecadethank you very much!
@OliveAbyss75719
11 ай бұрын
@@TheNextDecadeAnother question however, mister guy, how long do you think it would take to make this if theoretically you had school on weekdays
@csgotrollling4
Жыл бұрын
Could i make this using cardboard?
@TheNextDecade
Жыл бұрын
Probably! You might need to work out how to lay out the pattern with the corrugated cardboard so you dont get weird bends, but it could work!!!
@csgotrollling4
Жыл бұрын
@@TheNextDecade ill try using a different cardboard, like the ones used to make cereal boxes :DD
@fabulousjekster28
2 жыл бұрын
Can i use carboard to make this instead of foam? its hard to find foam where i live lol
@TheNextDecade
2 жыл бұрын
You can, however you may have a harder time getting the edges to meet and the parts to cround out and curve. You could also build this in cardstock paper to turn into a Fiberglass helmet. All up to you how you wanna use the pattern we made! Don't forget, Online retailers sell foam too! Blick Art Supply carries the 6mm thick SKS HD foam I used in this video!
@fabulousjekster28
2 жыл бұрын
@@TheNextDecade thanks, also i wanted to ask, I'm planning on making a Kamen rider kuuga (or genm) cosplay made out of cardboard (I found a tutorial on how to do it quite good). Can I use plastic dip to make it look shiny? I searched it up and found out that that's what make the costumes shiny and with that cool aspect but it's said that is used for foam, so Idk if it would work on cardboard
@TheNextDecade
Жыл бұрын
@@fabulousjekster28 Sorry I saw this so late! Plastidip will be absorbed by the cardboard. I recommend using PVA glue to form a skin on the cardboard. Plasti Dip will sit much better on that. If you want your plasti dip to be super shiny, look for "Plasti-Dip Glossifier". you can get the same look with acrylic paints too, look for heavy body high pigment paints. Good luck on Kuuga or Genm! Be sure to tag me when you finish, I'd love to see them!
@orange.arms1
Жыл бұрын
hello can i ask how much foam did you use?
@TheNextDecade
Жыл бұрын
I used about one 5mm thick roll that's about 24"x 84" and had plenty of leftovers!
Пікірлер: 41