You can find new flip key shell here: amzn.to/2XjaaAN Key logo sticker: amzn.to/36MPLXL Blank transponder chip key: amzn.to/3ew9DB2 Blank transponder chip: rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575132837&toolid=10001&campid=5338451867&customid=&icep_uq=blank-toyota-chip&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg (these are Amazon and eBay affiliate links)
@MrSodaBelly
3 жыл бұрын
How can I do this with the keyless entry
@DIYtimeTRD
3 жыл бұрын
What car is this?
@chanderpahwa8248
3 жыл бұрын
Oppppo6kghjuytyiujhbbvouyvyukgouybykhvyuigvguvghkghvjh you hjhjnb gjkvuykgiuyggujviuygkhvukyjhb jghvgkukuyvugjvkugviugghvjhghgvgkhgukvkughgkvuyvjugjugkuyjuykgikyyvgjul
@imbadwrench
4 жыл бұрын
Great project. The only thing I suggest is having your new key cut before you spend the effort swapping all the internals.
@e36fanatics
4 жыл бұрын
why? can they not cut it while its assembled?
@imbadwrench
4 жыл бұрын
No, but I have had keys ruined by shops while cutting them. would be a shame to waste all that effort.
@oriab2919
5 жыл бұрын
Great video and thanks... By the way all the bad reviews for the key shell are people saying that the key is not the right shape which is why your supposed to take it to a locksmith because if all keys were the same then any car can be accessed by a non-owner
@DIYtimeTRD
5 жыл бұрын
Thanks!
@georgecooper1753
3 жыл бұрын
LMAO are people that dumb
@Brokebanger
2 жыл бұрын
@@georgecooper1753 lol i guess im 14 and know that you need them cut they dont come in the mail ready to go in ur ignition
@DIYtimeTRD
2 жыл бұрын
😂
@chaseww
Жыл бұрын
I would think that you could get the key cut first before you do all that work to install the transponder. I'm sure that would work that way also
@DIYtimeTRD
Жыл бұрын
I like to cut key last, in case something is off and you need to return the fob.
@jmarcruzjr
Жыл бұрын
Thanks!
@jaylmw08
3 жыл бұрын
@ 3:09, is the small slot area in the lower right corner where the transponder chip gets placed? cause I didn't see you replace it into the new housing. edit: i see someone beat me to it. it is the small area I am referring to for those questioning.
@DIYtimeTRD
3 жыл бұрын
Yes, it is.
@_Klynna
Жыл бұрын
Is this possible to do with a 2006 4runner key? I have the button and the key as two separate components and I’d like to find a way to combine it into one key
@sicelymartin
2 жыл бұрын
Would this work on a honda key? Do you have a video on programming a honda key? 2011
@natalierobin7459
3 жыл бұрын
I am kind of confused. i have a toyota yaris 2011 and is this showing me that i can take out the key and put it into the flip key thing and use the flip key as my new car key. if i do that would i still need to take it somewhere to program it to my car. or is it already technically programed sense it’s from my old key parts lol
@DIYtimeTRD
3 жыл бұрын
Its already programmed.
@callmebackfriday2
3 жыл бұрын
I have the 4 button type for 2015 corolla. The winding spring is amazing bad design and the spring come out so many time and take me quite a while to put it back together. When I wind one time, it is too loose but when I wind 2 time, the spring jump out. They should have design something that do not need to manual winding the spring. Anyway, I do it so many time that I can do it next time but 100% not for anyway did not do this before. I am pretty sure whoever did not do this and try to change the battery, they will lost the spring. Also, it depends on the model of the flip key, I saw lot of youtube video trying to change the key because the flipping mechanical /metal/ case slot has broken. Can you give me a update that your key is holding and in good working condition? thanks for the video.
@kennydominican
4 жыл бұрын
Where do you put the transponder?
@DIYtimeTRD
4 жыл бұрын
The new flip key will gave a place for it. You can clearly see it @ 3:07 right near spring mechanism.
@nismox13c
3 жыл бұрын
I’m working with with this key for my cousin car 2008 Scion Tc, the panic key button gets stuck, should I shave the button down and hopefully that solves the problem..? Thank you
@DIYtimeTRD
3 жыл бұрын
Yeah, try to find and cut off a piece that makes it stuck.
@coolandmellow
3 жыл бұрын
Can this be used with a 2001 Chevy Tahoe
@DIYtimeTRD
3 жыл бұрын
Yes, they sell similar flip key shells for your car too.
@smoluwu1616
2 жыл бұрын
not expecting a response, but what if the chip is built in to the key itself?
@DIYtimeTRD
2 жыл бұрын
I would recommend making a duplicate key and then try to carefully get the chip out. That way you are not risking breaking the one and only key.
@smoluwu1616
2 жыл бұрын
@@DIYtimeTRD upon further research, it appears not exactly to be a chip, but a VAT
@smoluwu1616
2 жыл бұрын
@@DIYtimeTRD the exact car is a 1995 Pontiac grand prix, that's the key to look for if you look it up
@fr1571
4 жыл бұрын
Best video for doing this that I found. Well done. #Subscribed
@DIYtimeTRD
4 жыл бұрын
Awesome! 💪🏼😎👍🏻 Thanks!
@ericnwachukwu
4 жыл бұрын
How can I keep the transponder from rattling around inside the new key fob? I don't like the rattling noise when I use it. Is super glue okay? Or is that not safe?
@DIYtimeTRD
4 жыл бұрын
Use glue gun instead. It will be easier to remove if need be.
@ericnwachukwu
4 жыл бұрын
@@DIYtimeTRD I took it to an electronics shop and the solderer recommended that I don't glue the transponder until I spoke with the dealership because it may cause electrical connection issues. Did you have this issue? I think I'm just going to tape it down with some electrical tape since the transponder doesn't move much.
@DIYtimeTRD
4 жыл бұрын
No, mine was so tight fit, I could barely put it in.
@jaylmw08
3 жыл бұрын
i would use something more flexible like rubber cement or wedge a small piece of paper or cardboard so as not to affect the electronics. that way it would be easier to take out again if needed.
@bakhtiyarnajafli5612
3 жыл бұрын
Well done👍🏻
@DIYtimeTRD
3 жыл бұрын
Bakhtiyar Najafli Thnks!
@itsmanoo3260
4 жыл бұрын
anyone notice how he went from having a trunk button to losing it with the switch blade
@DIYtimeTRD
4 жыл бұрын
Good catch! My Scion tC coupe didn’t have a dedicated trunk button, it was opening using “Door Unlock” button, since hatch back is considered a third door... But Toyota keys have 4 buttons anyway. New flip keys are available without trunk button though.
@janeymacbarge8132
2 жыл бұрын
Do you know if you could get something for a Nissan Juke ?
@DIYtimeTRD
2 жыл бұрын
What year is it?
@rileybecerril7554
3 жыл бұрын
Is it possible to change a whole key and transforming it into a key fob with keyless start up
@DIYtimeTRD
3 жыл бұрын
It would require installing and reprogramming some ECU’s. Not exactly DIY friendly process.
@YoungWorld89
3 жыл бұрын
Will this work on a 2015 ford f450 & a 2013 dodge durango
@DIYtimeTRD
3 жыл бұрын
The definitely have somethinh like this for Ford.
@nahooltop
5 жыл бұрын
hello how can i enable my Toyota Camry 2009 when I closed it or open by the remote control thanks
@DIYtimeTRD
5 жыл бұрын
I don't think I understand your question. What do you mean by "enable"?
@nahooltop
5 жыл бұрын
@@DIYtimeTRD that is mean no sound came when I opened or closed the car (no beep no etc...)
@DIYtimeTRD
5 жыл бұрын
It is possible, but you will need a special cable and software for that. Soon I am planning to make a video on how to turn off different sounds on Toyota cars. Stay tuned...
@nahooltop
5 жыл бұрын
@@DIYtimeTRD thanks i have scan tool G-SCAN2 but in spacial faction not working in my Camry 2009 thanks for your time
@DIYtimeTRD
5 жыл бұрын
Normally it should be under "Customization" category.
@cmoreno891
4 жыл бұрын
I have a scion tc coupe too but its a 2014 and the key looks a little different from yours. instead of it having the diamond shape on the buttons, its the lock and unlock button above one another and the red alarm button a little under it to the right. would i still be able to switch it out to this key fob?
@DIYtimeTRD
4 жыл бұрын
Not this one, but there are other flip keys that will work with 2014 out there.
@samualchowdhury47
3 жыл бұрын
How did you safely remove the transponder chip? It's very hard to remove on my toyota key.
@DIYtimeTRD
3 жыл бұрын
My old key was broken already, so it wasnt too difficult.
@Buflonob
4 жыл бұрын
hi, looking at doing this but the key shell you show I cannot find on link, can you recommend another?
@Buflonob
4 жыл бұрын
ok, searched more and found it: www.amazon.co.uk/Buttons-Modified-Remote-Corolla-buttons/dp/B0831P6MYN/ref=sr_1_213?camp=1789&creative=9325&dchild=1&keywords=Toyota-flip-key-shell&linkCode=gs3&linkId=7952960f301741935b69d3c426e71281&qid=1598217907&sr=8-213 Issue I now have is there seems to be no keyring loop on it, can you suggest options please?
@DIYtimeTRD
4 жыл бұрын
It is on the bottom in the middles of the fob.
@luphaarp9123
5 жыл бұрын
So any key I buy from china can open the door to my car? I did not see you replacing the key itself (what goes inside the ignition) from the original to the new flip one...please explain
@MarisiaDauphin
5 жыл бұрын
luis haro you would have to get the flip key cut at your dealership or possibly Home Depot.
@lestertipay2630
4 жыл бұрын
is this gonna work with Toyota Corolla 2012? i am only seeing up to 2011. if you have a link for the 2012, let me know. thanks
@DIYtimeTRD
4 жыл бұрын
If it looks the same, it should work.
@lestertipay2630
4 жыл бұрын
@@DIYtimeTRD tried it eventhough it only says the model is up to 2010 and it worked. homedepot even duplicated the key for free. thanks
@DIYtimeTRD
4 жыл бұрын
Nice! 👍🏼
@l6ax278
3 жыл бұрын
I couldn’t find for avalone car!
@stevegomez6264
3 жыл бұрын
Does this work for Ford Focus SE 2012
@DIYtimeTRD
3 жыл бұрын
Yes, they have these available for your car.
@owendougan20
3 жыл бұрын
Where can I get a Toyota key logo sticker?
@DIYtimeTRD
3 жыл бұрын
I’ve found them on Amazon at done point, link in the description 👇🏻
@johnmark1232
5 жыл бұрын
Hi! Please help me, I bought a key fob for nissan navara and it seems i did something wrong because the unlock and lock won't work and if i use the key fob to unlock the door it will alarm. Can you help me to figure out where did I go wrong?
@DIYtimeTRD
5 жыл бұрын
What exactly did you do with your new & old key fobs?
@johnmark1232
5 жыл бұрын
@@DIYtimeTRD I just found out that i need place the battery correctly, thanks for the reply! I appreciate!
@Jason-ks4tu
4 жыл бұрын
Is it possible to put this in a hot wheel
@DIYtimeTRD
4 жыл бұрын
If you are determined, everything is possible!
@robantinarella1230
4 жыл бұрын
you made a mistake that key fob had a trunk button the one your take apart and put it in the flip key with no trunk button
@DIYtimeTRD
4 жыл бұрын
Not really. I had a coupe car, and it’s considered “3rd door”, so the trunk button on original fob didn’t do anything. I had to use the “door unlock” to open “trunk”. That’s why I got flip key without “trunk” button. They sell flip keys with trunk button for regular sedans as well.
@Vallkayrie
3 жыл бұрын
Sounds good, doesn't work on every car key
@androidgameplays4every13
3 жыл бұрын
can't you interchange blades?
@DIYtimeTRD
3 жыл бұрын
Usually not.
@osamaaljubory8984
5 жыл бұрын
Hello please help me CA119 front camera module Beam axis not adjusted Corolla 2017
@DIYtimeTRD
5 жыл бұрын
Is this a dashcam?
@osamaaljubory8984
5 жыл бұрын
Radar cross control
@DIYtimeTRD
5 жыл бұрын
Do you have TechStream cable to scan your car for errors?
@osamaaljubory8984
5 жыл бұрын
DIY-time Yes I have
@osamaaljubory8984
5 жыл бұрын
ca119 front camera module beam axis not adjusted This is error in radar cross control
@AHG7861
5 жыл бұрын
Where and how much did it cost to cut the flip key thanks
@DIYtimeTRD
5 жыл бұрын
Hardware store or locksmith. Usually $2-3.
@AHG7861
5 жыл бұрын
Thank you I used your video and transferred it works perfect very helpful
@DIYtimeTRD
5 жыл бұрын
Nice!
@sotocarlos7809
4 жыл бұрын
where did you put transponder?
@DIYtimeTRD
4 жыл бұрын
The new flip key has a cut out for it.
@gelangarcia1205
4 жыл бұрын
How to order of this item?
@DIYtimeTRD
4 жыл бұрын
Link in the description.
@winter7995
3 жыл бұрын
Nicee
@DIYtimeTRD
3 жыл бұрын
👍🏻
@whenifeellow
4 жыл бұрын
Hi, I want to go from a flip key to a normal key. Is that possible?
@ericnwachukwu
4 жыл бұрын
Yeah just buy a normal key shell on Amazon and put the guts from your fob key in it. It’s the same exact process as this just the other way around.
@prashantghimire4732
4 жыл бұрын
I cant find it on the link you provided
@DIYtimeTRD
4 жыл бұрын
You may have to copy/past the link manually. Some mobile apps block external links.
@robantinarella1230
4 жыл бұрын
yay but the trunk button was on the orginal key not on the flip key
@DIYtimeTRD
4 жыл бұрын
My car did it have trunk opener button. You can buy new flip key that has 4 buttons.
@moodyeric1893
3 жыл бұрын
where's the transponder chip?
@DIYtimeTRD
3 жыл бұрын
Which one?
@moodyeric1893
3 жыл бұрын
the one which is used to connect the remote to the car
@DIYtimeTRD
3 жыл бұрын
On some keys its built in. On mine it was removable from the remote logic board assembly.
@khalidmuhammad1768
Жыл бұрын
"Lost a key"
@zoltanlaszlo6424
3 жыл бұрын
This video is just like 2020.. shit.
@DIYtimeTRD
3 жыл бұрын
True, we see the world around us through the lens of our own heart.
@stew2040
3 жыл бұрын
Waste of time. When you need to change battery, you have to dissemble the key.
@DIYtimeTRD
3 жыл бұрын
No kidding....
@shannonwilliams9055
3 жыл бұрын
You just took the thing apart and put it back together. 😒
@DIYtimeTRD
3 жыл бұрын
No. You just miss the point of the video.
@zoltanlaszlo6424
3 жыл бұрын
Most important things like how to cut the old key and replace it, it’s not in this video...
@DIYtimeTRD
3 жыл бұрын
Bro, I didnt need to cut my old key, in case you missed that. Chip was removable.
@hulkhogan4947
3 жыл бұрын
@@DIYtimeTRD ppl are dumb asf i swear
@DIYtimeTRD
3 жыл бұрын
😂
@danielzimmerman4501
4 жыл бұрын
Is there anyway to add this to a different car, like a infinity G35
@DIYtimeTRD
4 жыл бұрын
I couldn’t find anything like this for Infinity.
@danielzimmerman4501
4 жыл бұрын
Thanks anyways, I have one more idea for making this compatible for my car, but thanks for checking.
@DIYtimeTRD
4 жыл бұрын
Wait, what year is your car? Is it with older or newer key fob style?
@danielzimmerman4501
4 жыл бұрын
@@DIYtimeTRD it's a 2008 infinity g35,
@DIYtimeTRD
4 жыл бұрын
I’m only finding it for older key fob: www.amazon.com/gp/product/B01I41I9Q8/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=yt-trnsfrmflpky-20&creative=9325&linkCode=as2&creativeASIN=B01I41I9Q8&linkId=0fddec7520243c7fce4987e19be55b3a But maybe it’s going to be easier to rig, than using the one for Toyota, cuz the buttons location is at least somewhat the same...
Пікірлер: 133