Does your car have more than 100K miles on the transmission fluid? If so, follow this easy tutorial to change it yourself! This procedure should be the same on all 1996-2010 vehicles with the 4T65E transmission.
The tools required are:
A ratchet, 10mm socket, torque wrench, flat head screwdriver, hammer, pliers, floor jack, jack stands, & oil catch pan.
The supplies required:
Dexron VI ATF: amzn.to/3R5f0gW
Replacement filter: amzn.to/3MQA4oU
(optional) Lucas Transmission Fix: amzn.to/46nKVxv
(ad)
Total time should be between 30-60 minutes (please leave a comment below if you feel like this time estimate should be adjusted).
0:00 Introduction
0:19 Tools Required
1:04 Set brake and jack up vehicle
1:14 Drain old fluid
1:51 Remove old filter
2:11 Install new filter
2:21 Clean transmission pan
2:46 Reinstall transmission pan
3:17 Fill with new fluid
3:34 Cycle through gears
3:44 Check fluid level
⚠ DISCLAIMER:
While I strive to make the information provided in this video as accurate as possible, I make no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. Fix & Maintain is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет Transmission Fluid Change | Chevy Impala
No video
Пікірлер: 67