This is how all epoxy videos on KZitem should be. Not loud noises and time lapse. I come here to get information not to watch people show off. Thank you very much
@bartonpopenoe
6 ай бұрын
This is the perfect video. Not slow. All the info. And great work.
@joesyuh
4 жыл бұрын
Loved this rockler commercial.
@pitman6992
2 жыл бұрын
Beautiful piece bro! Stay classy!!!😎👍👍👍
@EthanCarterDesigns
4 жыл бұрын
Another certified video and project Jonny! The swirls in the epoxy came out perfect...not too over the top, just a nice subtle detail that adds a ton!
@JonnyBuilds
4 жыл бұрын
Thanks brother!
@KadilakHomes
3 жыл бұрын
This video was awesome to watch!
@jparky1972
4 жыл бұрын
Oh wow! That turned out awesome. I'm moving into a place that will need a new kitchen and I'm seriously considering building my own units and work tops. I wanted quartz worktop originally. But seeing this.. I'm seriously considering a live edge epoxy worktop now. Thanks. Oh, and stay classy. 😊
@isubhashk
4 жыл бұрын
one of the best vid,,,classy , this is wat we call as professionalism !!! awesome work !!!!
@SpencleyDesignCo
4 жыл бұрын
Killing the game Jonny!!! NICE JOB!
@brucek66
4 жыл бұрын
Gotta love a third party drum sander! Looks great
@barryhaynes103
3 жыл бұрын
Exceptional build ...
@davidkilbourne5422
4 жыл бұрын
Stay Classy my friend! Great kitchen island!
@peter3352
4 жыл бұрын
Dude, every one of your vids plays like it should be on TV. I will probably never make anything out of wood, but I can't stop watching lol.
@bigwilly43729
4 жыл бұрын
Very nice. I wonder what this would look like for an entire set of kitchen counters.
@mjschaeffer2112
3 жыл бұрын
I love DFM Toolworks. Great products.
@frankwolf9187
4 жыл бұрын
Looks awesome.
@timmaggard8862
Жыл бұрын
Beautiful!
@TylerAFE
4 жыл бұрын
This looks great. Awesome job.
@tmn67
4 жыл бұрын
One word - AWESOME!!
@KwizatsHaderach
4 жыл бұрын
You call this trash wood but where i'm from i would have to pay an arm and a leg for these two beautiful pieces of wood. I'm jealous. Also, very nice table top.
@beauharris683
4 жыл бұрын
Great work as always mate! 👌“Stay Classy”
@AtTheGates66689
4 жыл бұрын
This guy built a full island and I can barley put together ikea furniture without swearing up a storm
@KomarProject
4 жыл бұрын
Dude that turned out awesome. I did a countertop with black epoxy for our laundry room so I know how much work you put in. Great job brother
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@reyesDodgers
4 жыл бұрын
AMAZING work, WOW!!!
@Aardrijk1
4 жыл бұрын
I always stay classy! Well.. Mostly. 😁 Great video!!
@donnie7578
4 жыл бұрын
"stay classy" Love this Island!
@JonnyBuilds
4 жыл бұрын
Thanks
@BenSabersTV
11 ай бұрын
I've got to do a build video like this on my channel, it'd fit right in with my build videos. Amazing video, work and skill thank you and please keep making this amazing content.
@elisethompson9556
4 жыл бұрын
Get you a man with these types of skills
@1966-k3z
4 жыл бұрын
Elise Thompson pouring epoxy on firewood is not a skill 😂
@TotalBoat
4 жыл бұрын
That island is amazing!!!
@nigeljohn9805
4 жыл бұрын
You are the man. Thank you for making these videos. You have Inspired me!
@jamisonpitsch8185
4 жыл бұрын
Top looks amazing 👍. Stay classy
@19woodworks
4 жыл бұрын
Really good looking island! I like the way you walk us through the process. Easy to follow! And stay classy! 👍🏽
@bluecurlygirl
4 жыл бұрын
Fabulous job. I'm not a fan of bare ply but that is fab. Love the counter. Turned out fabulous. Love the finish on it too. Much respect. Stay classy young man.
@matthewpotter1933
4 жыл бұрын
That was fun to watch! Thanks for sharing that, and really nice work. Wish I had a reclaimed lumber store where I live.
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@pearlaygriffinrider6979
4 жыл бұрын
put the pocket holes in Front and back on Drawers, that way back is not seen unless removed and Front is covered up with Drawer face
@6RWOODSHOP
3 жыл бұрын
Bud.. I have been following u for a while now and just realized u said okc.. im from duncan about an hour south of you would love to meet you sometime or get some lessons from you... big fan.. have a good one man
@JeffRevell
2 жыл бұрын
Would it make more sense to just add the pigment to the last of the three pours? Since you are using an opaque black pigment I would think that the first two layers are not visible under that last layer so any white pigment swirled into them would not be visible.
@lewiskemp8937
4 жыл бұрын
Great job. It looks great
@remoc52357
4 жыл бұрын
Bud that is beautiful..........
@rcstprez
4 жыл бұрын
Was a little concerned how the unfinished ply edges would look, but wow! Turned out great!
@JonnyBuilds
4 жыл бұрын
Thanks! Baltic birch is the way to go with exposed plys.
@andrewwhite5176
4 жыл бұрын
Awesome top, junky cabinet
@gregdagg9305
4 жыл бұрын
True craftsman..Very nice.
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@donavanmcelroy6263
4 жыл бұрын
Love it, man! Well done 👍
@spynexes
4 жыл бұрын
Well Done Jonny!
@hoanghungcuong6343
4 жыл бұрын
Tnx for sharing your talent... Nice one👍👍👍 2:56
@rtanderson2
4 жыл бұрын
Love this project! Stay classy, fancy man!
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@katiemarek6741
4 жыл бұрын
Beautiful! Stay classy
@JonnyBuilds
4 жыл бұрын
Lerv!!
@turki9641
4 жыл бұрын
Just amazing thing to watch👌
@soulhunterbill9529
4 жыл бұрын
Looks really nice! also SAVE da TREES!
@civic588
4 жыл бұрын
Gorgeous wow that is amazing work. i could never use that at all to gorgeous show piece :)
@favruun
4 жыл бұрын
Thanks for doing what you do. I have been watching for a few months, and the content is amazing
@scottyfrenzee571
4 жыл бұрын
I have a hunch this may be sponsored by Rockler. Side note: turned out great GJ.
@Runner1409
4 жыл бұрын
12:06 :)
@jimd385
4 жыл бұрын
Nice work dude.
@TheGamorion
4 жыл бұрын
"Stay Classy" would love to come work for ya sometime and really learn.
@CarlosAugusto-zv1cn
4 жыл бұрын
Beautiful,congratulations.
@EndHimRightly
Жыл бұрын
Stay classy! Did you have to deal with any bubbles in the resin?
@kristof3811
4 жыл бұрын
Awesome job!
@dumankral8812
4 жыл бұрын
good job
@FredMcIntyre
4 жыл бұрын
Looks amazing Jonny! 😍 Awesome work! 👍🏻👊🏻
@JonnyBuilds
4 жыл бұрын
👍🤠👍
@justlisaartmclaren6362
4 жыл бұрын
Oh yes stay classy indeed!
@lucasaubin
4 жыл бұрын
Wow, this is so amazing, good job Johnny!
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@AdamRich1785
4 жыл бұрын
Stay classy! Love this one Jonny. Been wanting to build an island for a while now. Might have to get your plans
@TranTheClever
4 жыл бұрын
Love this video! Thank you! 3:29
@thomasernst4894
4 жыл бұрын
Beautiful work...
@felixbriones9232
4 жыл бұрын
You had me at 60% 😂
@joachimsolstrand1172
4 жыл бұрын
DAMN. You're god man! well worked!
@Saluno375
4 жыл бұрын
Well, now we're not going to be satisfied 'till you build an actual maritime island, Jonny. ;)
@JonnyBuilds
4 жыл бұрын
Haha!
@MCsCreations
4 жыл бұрын
Really beautiful work, dude! Fantastic! 😃
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@MixxedTings
4 жыл бұрын
Wish i had this talent 💪🏾‼️
@jimhendrix7776
4 жыл бұрын
Nice build
@Xquisitink
4 жыл бұрын
Great job, looks amazing. “Stay classy”
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@stefangies672
4 жыл бұрын
Very good job ! A+++++++
@LastLegWoodworks
4 жыл бұрын
Looks great, dude! Nice work!
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@Lutzboater
4 жыл бұрын
Stay classy. Well done!!
@lydsmusiclover568
4 жыл бұрын
Hi random question for you can you do the shou sugi ban method or anything close to it using a lighter to burn the wood.
@photog1529
4 жыл бұрын
What? No Kreg drawer pull jig? I'm kinda shocked. :) Tabletop is awesome.
@anthonycampos2887
3 жыл бұрын
Very awesome that’s really nice!!! How high did you go with the sanding grits?
@17buckrogers
4 жыл бұрын
use stone coat countertops epoxy for better results
@meanlsmachine527
4 жыл бұрын
Love the whole project, but that top! Stay classy Jonny
@GJ11598
4 жыл бұрын
60 % of the time I ask a question...every time. Is that Oddies Oil food safe with the resin top? This is a solid idea (no pun intended...or maybe it was) and I'm thinking about doing one similar for my place. Stoked to see some plans for this.
@masonmcginty487
Жыл бұрын
hey! i have starting wood working. i live in edmond okc. would you be willing to show me a few pointers!?
@mariahuter8613
8 ай бұрын
Great!
@transportservices6333
4 жыл бұрын
Awesome! The wood must be dry?
@wesleydunphy9182
4 жыл бұрын
I forwarded to see the end result.
@apo2740
4 жыл бұрын
How much would that cost in total? Making hours and materials together?
@jeffunruh2147
4 жыл бұрын
Beautiful build. Where do you get the 3/4 inch Baltic Birch plywood? I have found 1/2 but not 3/4. Been wanting to go into Vintage, but afraid I would never leave. Also, how much epoxy did you use for the pour? Keep up the great work!
@JonnyBuilds
4 жыл бұрын
If you’re in OKC go to Phoenix Hardwood on N Classen. Thanks for watching, and it was about 3 gallons of epoxy.
@loejets
4 жыл бұрын
Lovely but no edge banding ?
@slightlycrookedworkshop
4 жыл бұрын
This turned out great but, at the end, I'm a bit disappointed you're not cutting on a cutting board that you made.
@Eyskapz
4 жыл бұрын
If the apoxie color was blue and pearl white
@wolfpack_rob1644
3 жыл бұрын
Where can I find wood like that?
@chipp024
4 жыл бұрын
Are any epoxies better than others or what is a good learning epoxy with spending $$$
@aaronpantoja3571
4 жыл бұрын
I would like to know what kind of epoxy you use and how is the process
@lubxtpf
4 жыл бұрын
Crushing!
@TheOceanman290
4 жыл бұрын
First class.
@RS-Amsterdam
4 жыл бұрын
Great job, love the outcome, time for a self made cake ;-)
@JonnyBuilds
4 жыл бұрын
Thanks 🙏
@ianblack9447
4 жыл бұрын
Stay Classy
@kareemalking8826
4 жыл бұрын
That amazing
@RealOscarSaavedra
2 жыл бұрын
Stay classy!
@raymondmiller4981
4 жыл бұрын
You forgot to mention which model of Rockler shop rags you used to wipe on the Watco poly.
@JonnyBuilds
4 жыл бұрын
No, I mentioned the Rockler shop tags. Go watch again.
@raymondmiller4981
4 жыл бұрын
@@JonnyBuilds Ha! Stay classy
@timothyhopkins9319
4 жыл бұрын
Maybe I missed it, but how are you attaching the sides of the backer panel? At the 10:12 mark there seems to be nothing for the side to attach to... The top attaches to the stretcher, middle is attached via the dividers, but the sides and I guess bottom as well?
@JonnyBuilds
4 жыл бұрын
Good catch. A detail I left out that will be discussed in the build article...whenever I get time to get that out. Hopefully after the holidays. Basically there’s enough to attach to on the top and middle to pull in the sides. For the bottom I added plywood strips inset the width on the 1/4” backer board at the back of the cabinets.
@JonnyBuilds
4 жыл бұрын
My original design called for the backer board to be a 3/4” plywood panel that stretched the length of the piece. I tweaked the design to save on materials and to open up that end so you can have two people sit at the kitchen island like a breakfast nook table.
@timothyhopkins9319
4 жыл бұрын
Jonny Builds That makes sense. Thank you for the explanation 👍🏼
Пікірлер: 194