Installed them on Traxxas Hoss 4x4 VXL. Great vid and camera shots. Thanks much
@RacingAlien
4 жыл бұрын
Red/Blue thread lock.. potato/potato.... Lol Thank you for taking of ypur time to show us the right way to do this installation! 💪🏽💪🏽
@harveycamacho2247
2 жыл бұрын
Thank that was a great presentation. Will be getting them for my Slash
@InTheDogHouse3DPrinting
8 жыл бұрын
I installed a sway bar kit on my slash, and I did it a little differently. I put the links on the A Arms first, then slid the sway bars into the links, and then put the shoulder screws on, and then lined everything up, and tightened it all down. You need to line up the sway bars on each side before tightening the shoulder screws down. Great video.
@luiscrespo1165
6 жыл бұрын
great vid thank you - reminder to all - long bars go in the back or your won't have enough play
@pbjunky511
2 жыл бұрын
Sway bar should be free on the chassis to allow it to lift the opposite side that your picking up on to work properly. For how tight you have the screws you might as well have just put stiffer shock springs on. And I'm not haggling just trying to be helpful.
@krazy4baja
10 жыл бұрын
Great vid. I'll be picking up sway bars, LCG chassis, and nicer shocks/ springs for my slash
@alltheluck
10 жыл бұрын
Hey glad you liked the video and thanks for commenting! Cheers!
@jonathanlouth1001
10 жыл бұрын
great video. just got my kid a slash 4x4 . i will get a pair in the morn. thanks againg for your help. keep making more.
@alltheluck
10 жыл бұрын
Glad you enjoyed the video, the sway bars are really worth it, Cheers!
@yourbeekeeper
11 жыл бұрын
Looks good! Should improve stability for sure!
@Texasredfish5114
8 жыл бұрын
Thank you so much for your video much appreciated!
@mrk3vin79
10 жыл бұрын
Thanks for the help.
@conwayensor7478
9 жыл бұрын
Hey man thanks for the info, lost some links on the Platinum and this came in handy on the rebuild. Jut a heads up you don't need so much thread locker on your threads. That stuff goes a looong way. You only really need a dab or drop. Anyways thanks again!
@heycourage762
9 жыл бұрын
Conway Ensor I know Im really bad with thread lock! Thanks for the support! CHEERS!
@conwayensor7478
9 жыл бұрын
Any time mate. :)
@gamingkekse1969
6 жыл бұрын
Great Video man! You helped me a lot!
@islerenner
4 жыл бұрын
I believe you put the short rods in the rear and the long rods in the front.
@Budrick3Gaming
6 жыл бұрын
Thank you this helped alot. :)
@tjsreptiles
11 жыл бұрын
nice video thanks
@voyu5776
5 жыл бұрын
Thanks man
@smokeskull
10 жыл бұрын
Did you install the longer links on the front sway bar or the rear? I am confused cause the instructions say the short links go on the front but it looks like you put the long one there? Optical illusion perhaps?
@aomaggots-
9 жыл бұрын
You're right man. This dude got them backwards. Good eye
@austinb1824
4 жыл бұрын
@0:28 all about those multi flav's 👅
@MrMrmcook2008
7 жыл бұрын
Do you know what size grub screws those are, mine are ruined and need new ones?
@josephstcharles4733
2 жыл бұрын
1.5 mm
@mikasiereveld3124
6 жыл бұрын
You tightend the screws for the swaybar to much now its not workig
@Fro-Daddy
8 жыл бұрын
Is there a sway bar kit for the 1/16 scale Slash?
@clydeprasith8006
6 жыл бұрын
Jeff Fleck yes there is but intigy makes them
@mark675
5 жыл бұрын
How to know its traxxas?.. all the bolts are rusty 😄
@adamye02
9 жыл бұрын
So what do sway bars do? Increase the hardness of the shocks?
@carternevill
5 жыл бұрын
They make it so the truck stays more level while cornering. It keeps the suspension from rolling too much
@manuelcobian2355
6 жыл бұрын
Why tha silver
@XxPyroMan101xX
10 жыл бұрын
Yeah we all know that you get High off of that thread lock. Hey dude it can be cheaper than weed. LOL
@Wazza722
6 жыл бұрын
These are a bad design!A sway bar is supposed to lift the the opposite side when cornering.All these do is stiffen the suspension!
Пікірлер: 36