Wow, so many upgrades, love the metal I would love to compare mine to yours!
@RoadsideRC
4 жыл бұрын
That would be fun to do a side by side. Let me know when you come to mid-TN! :)
@jrc-fabs1634
4 жыл бұрын
Will do! Mabe one day cause my aunt lives in Utah
@YannisRasty
29 күн бұрын
Hi, what wheels do you have because im wondering about the fitment, if the portal cover fits in my wheel so im asking so that i can search your wheels online and take a glance how much space they have inside. Thanks
@RoadsideRC
29 күн бұрын
Hi there! It was these wheels I was using; amzn.to/4dHZW0X
@jrc-fabs1634
4 жыл бұрын
Yes! It got up the hill!!!!!!!!!!
@RoadsideRC
4 жыл бұрын
I was genuinely excited to get it up that wall!
@jrc-fabs1634
4 жыл бұрын
Same!!!!
@Josh.Howard2019
3 жыл бұрын
Might want to look at the galvanic corrosion chart and compare yellow brass and aluminum.. keep it all clean and you’ll be fine. Let it sit.. it’s going to corrode
@RoadsideRC
3 жыл бұрын
Oooh! I hadn't even thought of that!!! Thanks.
@RCPropaganda
3 жыл бұрын
good choice.
@RoadsideRC
3 жыл бұрын
It has worked very well for me so far.
@ateaserc
4 жыл бұрын
Strength wise, I ran all brass Treal parts and their housings for the 12 hour Recon G6 Fix without any problems and still running them! No worries!
@RoadsideRC
4 жыл бұрын
Thanks for the input! I kind of guessed that they would be fine...but just felt safer this way over the long run. Might have been a mistake. Thanks again!
@crawlerrc
4 жыл бұрын
Gracias por compartir estas especificaciones. Like por tu trabajo
@RoadsideRC
4 жыл бұрын
Thank you! Glad this was helpful!
@blackwolfrc
4 жыл бұрын
That’s a very nice upgrade
@RoadsideRC
4 жыл бұрын
I really think the quality was top notch on these parts.
@KurtsRCs
4 жыл бұрын
Brass all the way very heavy tho, Treal has some nice product great upgrades putting some nice stuff on this truck
@RoadsideRC
4 жыл бұрын
Yeah, that is exactly why I didn't go full brass. Figured it would just add up to too much weight.
@devon8419
4 жыл бұрын
Awesome man. You should try out a set of yeah racing desert lizard 90mm shocks and do a video about droop setups. I just got mine yesterday and it's very different from what I'm used to
@RoadsideRC
4 жыл бұрын
Awesome! Great idea. The Desert Lizard shocks seem very popular right now.
@waynesanders5409
2 жыл бұрын
I’m using the stock shocks on full droop and it seems to do well I’d like to try a set of the dl on my gspeed tho
@rcking3745
2 жыл бұрын
Are the Differential covers on the TRX4 The same back and front ???
@RoadsideRC
2 жыл бұрын
Yes
@jrc-fabs1634
4 жыл бұрын
And one last comment for your question at the end, if it makes you happy to get another upgrade, do it! Personally I’ll only get an upgrade when I brake the same part multiple time in a row. I use the money that I don’t spend on upgrade to save for a new rc (typhon 6s)
@RoadsideRC
4 жыл бұрын
Thanks! That is typically what I would do also. Typhon 6S will be a blast!
@jrc-fabs1634
4 жыл бұрын
Yes!😁😁😁whenever that comes😅👍😁
@islandrc-duke1972
4 жыл бұрын
nice mods,cool rc
@RoadsideRC
4 жыл бұрын
Thanks 👍
@jdssurf
Жыл бұрын
Someone said the treal portals made them lose steering angle, any thoughts?
@RoadsideRC
Жыл бұрын
I don't have those specific parts, so can not say. However, ha e seen something similar.
@gadgetmantwincities
4 жыл бұрын
Great video Troy! Are you using the small batteries in the front of the truck?
@RoadsideRC
4 жыл бұрын
I am not. I used a KYX battery and servo relocation kit that allow for a larger battery to be placed directly over where the motor is. Here is the video: kzitem.info/news/bejne/km-XzHmVaZqCgqA
@waynesanders5409
2 жыл бұрын
I just used brass on the c hubs and portal housing
@RoadsideRC
2 жыл бұрын
That works also!
@johnmiller4553
4 жыл бұрын
REAL NICE 🤙🤙🤙🤙
@RoadsideRC
4 жыл бұрын
Agree - these parts were really good quality.
@rcking3745
2 жыл бұрын
Would all of the upgrades fit on the stock tire ???
@RoadsideRC
2 жыл бұрын
Yes
@kirbyjeffery4773
2 жыл бұрын
What did you do with the stock parts ?
@RoadsideRC
2 жыл бұрын
Kept them for awhile, then trashed them
@kirbyjeffery4773
2 жыл бұрын
Man I could have used them
@kirbyjeffery4773
2 жыл бұрын
If anyone has any TRX4 axels let me know thanks ! And make sure to like and share the videos !! Subscribe to the channel he has great content 👍👍!!
@maximumrpm1868
4 жыл бұрын
👍👍
@RoadsideRC
4 жыл бұрын
Thank you!
@waynesanders5409
2 жыл бұрын
It added a lil over 400g I haven’t weighed it yet but it’s heavy
@RoadsideRC
2 жыл бұрын
Nice!
@williamhansbrough5465
4 жыл бұрын
I would get some 2200 Mah 3s battery good run time and less weight up high
@RoadsideRC
4 жыл бұрын
Yeah, I probably am going to have to do that.
@sikolikhole
4 жыл бұрын
That truck make me realize how beat up my axles are.
@RoadsideRC
4 жыл бұрын
Ha! Yeah, they do get there! This truck has seen a few crawling days since...they already are showing signs of wear.
@rockn711
Жыл бұрын
I think you confused brass with copper. Brass is much stronger and harder than both copper and aluminum
@RoadsideRC
Жыл бұрын
Maybe! Thanks.
@jrc-fabs1634
4 жыл бұрын
Next video: SKID PLATES
@RoadsideRC
4 жыл бұрын
I thought about it...but think they will just drag on stuff. Am I wrong?
@jrc-fabs1634
4 жыл бұрын
Sorta cause I’ve had mine for almost a year and the 4 link is all rusty from scratched and tranny cover(plastic) had deep scratches. Most of em came from that extreme rock crawling video on my channel. Also when mine hits hard it’s really loud. Skids will help that. I’m thinking about getting some
Пікірлер: 57