If the water purifier tap is leaking water, watch the video. Before removing the purifier tap, close the tank valve and the inlet water valve. Carefully, remove the faucet switch cover with the help of a knife. If the packing screw is oxidized, tighten the rust remover. Remove the screw. Remove the key cap. Remove the shaft seal slowly and carefully without damaging it. Check the gaskets in the shaft seal. Replace if worn. If there is a break in the shaft seal, replace it with a new one. Refit the new or repaired seal. Open the tank and water inlet valve. Observe if there are any problems. If there is no problem, install all parts. If there is a problem, replace the purifier tap completely. Finally enjoy your work;)
- 5 жыл бұрын
Treatment Faucet, How if water is leaking?
- Рет қаралды 31,282
Пікірлер: 26