With the pins do you need to use them on the bottom of the dividers as well with the bigger cases ? I've got the Pelican 1650 case and will be getting this system but I'm wanting to know if I need to double up on the pins as I will be buying extra panels for my layout.
@donniedarko1345
6 жыл бұрын
greatly over priced but I love my Pelican case now. Had to order an additional 90" of extra foam for make my bag to accommodate all of my stuff. The system is good, it just doesn't come with enough padding to complete your set up. Be prepared to spend another $100+ on getting your configuration the way you love it.
@jorgesierra3203
5 жыл бұрын
I just got an air1485 for 90 bucks lightly used and the trekpak for that case costs almost the same.
@DroiMedia
6 жыл бұрын
Price is killer but these things are amazing!
@SimonPhillipsPhoto
4 жыл бұрын
Seem B&H are the best place to buy them from as you get more for your money. there's other sites but you don't get the same kit.
@npet6842
3 жыл бұрын
I got a Trek Pak version for the same price as the foam model , as the retailer couldn't sell them at the up-charge price . I filled the voids with generic cheap foam . Win win :-)
@jackofblades6736
4 жыл бұрын
I would highly recommend the pullout foam version.
@standarduser7105
4 жыл бұрын
You can go that route, but I’m definitely going with this guy on his DIY Trekpak: kzitem.info/news/bejne/qKyZ24qeqXqlnX4
@BGeorgeVideo
5 жыл бұрын
Do you all have a kit for a Pelican 1740?
@BobMarley-wd3sf
6 жыл бұрын
Would these fit inside other case brands like Apache from Harbor Freight ?
@therrera117
2 жыл бұрын
If it’s a matching model then yes
@seabass3011
3 жыл бұрын
My top foam falls out every time I open the case. Do I have to glue it to the top? It's very irritating.
@trevorhoward8916
3 жыл бұрын
Velcro (hook and loop)
@thepurpurite
6 ай бұрын
16 pins in that final layout you show (you only get 10 in a kit) and more foam dividers than you get in a kit. i love the concept of this but the cost is oppressive, especially if you use older vintage camera gear and need more dividers and pins for the smaller lenses and bodies.
@JeiReign
3 жыл бұрын
The price is half the price of a Pelican case.
@alibharmal8540
7 жыл бұрын
Will the pelican 1510 fit 2 full size dslr cameras like the D5 and D3s along with a 70-200 2.8, 24-70 2.8, 14-24 2.8 ?
@gbblair
5 жыл бұрын
probably everything but the 70-200
@SimonPhillipsPhoto
5 жыл бұрын
I bet you found this out already but if anyone else is looking, you can very easily do it and fit another lens in as well.
@enri_1986
4 жыл бұрын
@@SimonPhillipsPhoto Wow, didn't expect to see you here. You've got a 1510 and 1650 with custom foam now.
@SimonPhillipsPhoto
4 жыл бұрын
@@enri_1986 haha yeah I'm on here but I mainly use KZitem for personal stuff at the moment. I've got the Pelican 1510 with the pelican dividers but I'm considering the TrekPak system as my dividers are worn out after 8 years of use. My big Pelican 1650 I think I will just stick with my custom job I done as it works so well and be great if I travelled.
@enri_1986
4 жыл бұрын
@@SimonPhillipsPhoto There's a used (and older) 1650 for sale near me. Might be a little overkill, but I can fit a light modifier or two. Hard to say no since it's $100 with foam.
@thebrowncrew
3 жыл бұрын
I need one for my 1610, the price is just to much.
@faradaylauren9616
10 ай бұрын
The original Pelican TrekPak Kit had cutouts I guess. The current ones don't. Instead, they have 3" of foam on the bottom of the cases so the TrekPak can lie flat. You lose 50% of the volume of a 1615 from this foam. It's really ridiculous how thick the foam is. I'm shocked.
@steelty
3 жыл бұрын
Uhhhhhh… What about the lens sitting on the freakin wheel walls???
@Kson7491
2 жыл бұрын
Ok don’t you have more movement of your gear with this system vs a pull out foam system. Isn’t that more snug assuring your gear doesn’t get jostled around.
@lawrenceking4433
5 ай бұрын
Yes, but once you’ve plucked the foam that’s it you can’t un pluck so need to get a new foam set. This is far more configurable and you only need top ups to do most reconfigurations.
@joshmdmd
7 жыл бұрын
foamboard and pins for $100. cool.
@PHILMMedia
7 жыл бұрын
its actually very cool
@joshmdmd
7 жыл бұрын
+PHILM I have 10 pelicans. just gonna make a foam insert for each. 😂
@MrRodwatson
7 жыл бұрын
This should be $39.99 at most. Just because a lot of us own thousands in gear, doesn't mean we're reckless with our money.
@MikeThe
5 жыл бұрын
I bought a trekpak for 100 bucks including a case ^))
@yuan-jia
3 жыл бұрын
Can't agree more with all the comments on these overpriced foams.
@dudedavid522
2 жыл бұрын
yes, but with the amount of copy cat DIY solutions, versus the pluck foam or velcro dividers, seems like they're onto something
@lawrenceking4433
5 ай бұрын
The pluckable foams are just as expensive. These seem far more configurable
Пікірлер: 35