Hello... Can I used it with full screen in the sim or i have to put it in Windowed ?
@IslandSimPilot
3 ай бұрын
The sim is actually windowed, what they call "Full Screen" in the sim is actually borderless windowed mode. So you can use this in "Full Screen" mode with MSFS.
3 ай бұрын
It works in full screen mode on graphics settings as well, differently than other games. (I am not talking about borderless window)
@pennywise5095
3 ай бұрын
If i would have all the framerate increases they promised me from 3 years ago till now, i would have around 1200 fps I have only 34 to 42..... Well i bought it and i get 60 fps now! some artifacts with fast moving planes but i am happy!
@ChrisM541
3 ай бұрын
But is it a 'smoother' experience? Do you really(!!) see a difference?
@pennywise5095
3 ай бұрын
@@ChrisM541 yes i do i think its great and if you dont like it you can always refund
@ChrisM541
3 ай бұрын
@@pennywise5095 That's good news, cheers, and at the very low price it sells for it sounds like a no brainer to purchase.
@michakwiatkowski4527
3 ай бұрын
@@ChrisM541 Yes is much much smoother. I still use TAA and didnt get any extra FPS but the game works much smoother then without it.
@DoniStunts
3 ай бұрын
I just tried this thinking I was wasting my time, I was getting 20 FPS on Meigs airfield now it genuinely looks like im getting 50 fps, this is hands down the best tool I have ever tried, there is a little jitter here and there but its going from unplayable to outright great experience. fyi I have an i9-10850k and a 3090
@IslandSimPilot
3 ай бұрын
I had much the same experience!
@pvdgucht
3 ай бұрын
Seems great for a 120Hz monitor. Personally I have a 60Hz Freesync monitor. When I turn this program on it takes away like 6-7 fps and double the frame rate. But I get about 45/50FPS without the program and prefer just to have the Freesync and 45/50FPS combo rather that the Frame generation visual artifacts. Would probably use it if I was to get a 120Hz monitor, maybe soon waiting for a 120Hz 27-Inch 4K OLED monitor to become a bit more affordable.
@Simmymind360
3 ай бұрын
Frame Generation does not work for VR.. however if you have day a midrange pc use openxr toolkit set resolution to about 80 percent and in game set DLLSS balance and rendering to low or even default boom maybe 90 Fps
@PeterMatthess
3 ай бұрын
just downloaded and tried this, albeit ive not tested it much but im getting laggy performance with it, perhaps I shouldn't be trying to use this at the same time as using the auto fps app you previously have shown on your channel
@valentindasilva1394
3 ай бұрын
It seems that this programm has problems with HDR monitors. As soon I enable HDR Support I get bad stutters and max. 10 fps.
@TBMPilot736
3 ай бұрын
Does it work in VR?
@travelplanetireland9955
2 ай бұрын
hi i cant choose gpu display i have only auto and ffs not change nividia 4060 max ffp16 on high
@lha987
3 ай бұрын
I'm still waiting for DynamicLOD or AutoFPS to update for SU15. Without one of them the game is basically unplayable
@manuelferia1
3 ай бұрын
Is anyone having the mouse with stutter as soon as lossless scalling is enabled?
@chrisburn8971
2 ай бұрын
how did you turn it on and off?
@chefscallop1
3 ай бұрын
You don’t have shuttering in some games borderless ?
@duanerosamond9559
3 ай бұрын
I have a 3050 RTX pn a Asus Laptop. Will this work on my system at 2x without overworking my GPU ?
@vale90248
3 ай бұрын
Hi, I am not able to select fs.exe. It says that I have no rights/permission for doing this. How can I fix it???
@Wests1908
3 ай бұрын
Thanks @IslandSimPilot. I have an Acer X27 4K 144hz monitor and 3080TI card. Would I go for 70 refresh then?
@LorenzoFrausto
3 ай бұрын
Yes
@Deda8000
3 ай бұрын
You mean 144 in global and 70 in program; because i have the same
@Wests1908
3 ай бұрын
@@Deda8000 Tried taht. it didnt work. I dont know whats going on.
@Deda8000
3 ай бұрын
@@Wests1908 so what i must put on ;
@Wests1908
3 ай бұрын
@@Deda8000 I have no idea. The program doesn't work for me
@567davefair
3 ай бұрын
I just purchased Lossless Scaling and was wondering if this app has to be run from Steam or can it be run as a Windows app cause I ain't seeing it in my Windows app list.
@IslandSimPilot
3 ай бұрын
When you open the app it will show on your taskbar, I just right-clicked on it and pinned it to the taskbar and you can run it right from there.
@jmbroxs
3 ай бұрын
I want to let you know how much help you were to me, I’m an old simmer, I know absolutely nothing about computers. I was able to install this and now my sim is as smooth as butter. You were clear in your speech and went slow enough for me to follow… Thank you so much… you made an old guy very happy.
@lancecovel1
3 ай бұрын
I purchased this after watching the video. Figured it wouldnt work, but hey, its only 7 dollars. Boy ooh boy was I suprised! I cant stop trying different areas that were unflyable for me before. Definitely works!
@IslandSimPilot
3 ай бұрын
Glad to hear that!
@sinus-sq
3 ай бұрын
Wow! It's definetly better than the FrameGen mod, although I couldn't see any difference in your video when you had it on. Probably it just kept recording in 30fps? For me it's running incredibly smooth now. Thank you so much Cpt. IslandSimPilot 😎
@camhackett44
3 ай бұрын
Is this better than native frame gen (with a 40 series)?
@nardy-q7k
3 ай бұрын
Can I use it in vr?
@kaikios
3 ай бұрын
Currently no. The image inside the headset will be unaffected, tho it does still work on the window of the game while you are in vr. So i would still see a benefit if you want to for example record or stream your gameplay with a smoother fps
@GraperPie
3 ай бұрын
vr reprojection exists
@therightstuff8216
3 ай бұрын
@@GraperPie How do I have to interprete that? Do you say the tool is basically reprojection for the flat screen?
@MarcusInVR
3 ай бұрын
Just now I tried this with X-Plane and OpenXR through VirtualDesktop. Answer is: Yes you can. Works well.
@MR.B1819L
3 ай бұрын
Ive never heard of this program so i decided to give it a try bc youve never steered me in the wrong direction before and this is by far the best my sim has ever looked. Best 7 bucks ever spent. Thank a ton!!!!!!
@IslandSimPilot
3 ай бұрын
I’m so glad to hear that. This update really has brought this program into its own, I think it’s pretty amazing!
@XYQW7
3 ай бұрын
Maybe you should reconsider your testing scenario(s). Not much of a point using a scenario with already good FPS not using any frame generation. What about KLAX with AI traffic and Fenix A320?
@ironhead13
3 ай бұрын
This is the single greatest video to improve performance since the release of the sim. I have 3090 with a 5800x and the performance at 4k was really bad with study level airliners in VATSIM at a busy airport. Now the landings are butter smooth. No stutter even on the weekend at Frankfurt or Heathrow with 100s of other aircraft around. Thank you so much Island Sim Pilot. You’re a star.❤
@asc2276
2 ай бұрын
How is the input lag?
@JaimeCCS
3 ай бұрын
Wow!!!!!! Best purchase ever made. Smooth like butter at heavy airports like KJFK with real traffic. Simply amazing. Than you!
@chrislonsdale6709
3 ай бұрын
For all the people saying "this didn't fix things for me" your slightly missing the point.This really benefits the poeple who have extra processing power either GPU/CPU but it is being restricted by normal "bottlenecking". I have a AMD Ryzen 7 3700X and a 5700XT and this made a pronounced difference while also running FSTL and MSFS AutoFPS. Mileage may vary so the saying goes.
@tspryaviation
3 ай бұрын
What settings did u use for the 5700XT? I have a Red Devil 5700XT CPU and a 5700X CPU but idk what settings to set it at to get these results.
@senti2175
3 ай бұрын
This will cover CPU bottlenecking not GPU since it depends on GPU.
@mhoffman30
3 ай бұрын
I think I will give this a try because my system runs pretty well as it is but if I turn on FSTL it tends to impact it a lot and will typically add some stutters.
@flicmcfly1536
3 ай бұрын
I wonder if the AutoFPS app can be used with this or if it would even be needed?? I currently run 30fps locked in-sim with 1/2 refresh on a 60hz monitor (actually 120 but run it at 60).
@cptairwolf
3 ай бұрын
One thing thats important to remember is that there is no such thing as free frames. Frame generation trades off input latency for those additional frames. Heres why, the gpu renders 2 frames into the frame buffer. These would normally leave the buffer and get sent to the monitor as soon as they are ready but because frame gen needs time to render an intermediary frame, the frames are held in the buffer long enough for the software to finish generating a new frame. Sure this only takes milliseconds but for certain types of games (and gamers), milliseconds added to response times could ruin the experience
@zoe..d
3 ай бұрын
Read the room, if your flying with milliseconds of room for error, you are having an exciting or deadly time of simulated flying. We don't care about 360 jumping no scope crap in here...
@lights0030
3 ай бұрын
Frame generation is mainly employed in situations where the frame rate is sufficiently low that the additional latency from this technology is offset by the substantial increase in FPS and smoothness. In contrast, competitive games, where low latency is crucial, are generally optimized to the point that most PCs do not require frame generation technology for a smooth experience.
@kennetha6594
3 ай бұрын
This is msfs, latency is mostly irrelevant as opposed to fps. Flight sim is the best use case for this program, at least for me. Imagine previously having only 40 fps at best but now you can have a smooth 120 fps experience with negligible latency.
@cptairwolf
3 ай бұрын
I don't disagree when the what any of you guys are saying but there are always those who wonder when this tech will work for VR and input latency is basically the reason it won't. VR needs near instant frame draw to keep up with the users head movement. Frame generation makes that impossible
@lights0030
3 ай бұрын
@@cptairwolf Fair enough. 👍
@philipfoster7269
3 ай бұрын
Okay I am trying this out but I think that it swaps frame rate for latency. My sim runs way smoother without it. Still trying stuff out but at the moment I think it might be a no from me.
@deadstaromega8891
3 ай бұрын
Hi. This is probably a dumb question, but I'll ask anyway and throw myself on the mercy of the community 🙂. I sim in 4k. Will I benefit from running this in 4k or do you have to run in lower resolutions for this to work? I currently use the frame gen mod which is very good but does have some downsides. Also, in the comments someone was saying you have to run games in "Windowed" mode. I use "Full Screen" only, does that mean it will not work?
@IslandSimPilot
3 ай бұрын
Hey, MSFS is not true "full screen", it's actually borderless windowed mode. So you absolutely can use this for MSFS. Also, you sure can use it for 4k, what card do you have?
@deadstaromega8891
3 ай бұрын
@@IslandSimPilot Thank you so much for the answer. I have a 3080ti and use a 55" lg TV. We all have our preferences, but I feel that less than 4k does not look to good on a screen that size. The screen is 120hz.
@mikeluchia6555
3 ай бұрын
Really wish they could come up with something like this for VR.
@captainriker355
3 ай бұрын
Great! so in the lossless app there is an option to turn on HDR support, that solved my crazy colour issue
@MiroslawSawenko
3 ай бұрын
Hi! Can't add a FlightSimulator.exe to new profile! "You do not have permission wrights" error... The XboxGames folder is on C:. Run as Admin no effect. Trying to change permissions to folder and to *.exe itself, but unsuccessful. Any solutions?
@darrenjk5438
3 ай бұрын
That's with all Microsoft games on PC. You also can't do this with Forza Horizon 5. I guess we have to use a general mode and change it from there.
@yuenbarnby8228
3 ай бұрын
The captain is back with another brilliant video🔥
@IslandSimPilot
3 ай бұрын
Thanks so much, Yuen! Appreciate the support!
@NicolajFlies
3 ай бұрын
Do I have to have frame gen installed for this to work, or does it work 100% via this new program?
@imacmill
3 ай бұрын
VR users need not apply, correct? Edit: FG does nothing for VR users.
@IslandSimPilot
3 ай бұрын
I have to be honest, I don't know. I'm not familiar with what works with VR and what doesn't. Hopefully someone can answer.
@CRAZYHORSE19682003
3 ай бұрын
What headset do you have?
@imacmill
3 ай бұрын
@@CRAZYHORSE19682003 Quest 3, but according to the interwebs, FG is meaningless for VR. Motion Reprojection is the closest analogue.
@IslandSimPilot
3 ай бұрын
@@CRAZYHORSE19682003 That's Tobii Eye Tracker 5.
@ThorNjord
3 ай бұрын
Bummer!
@sens_120ms
3 ай бұрын
I highly doubt my GTX 780s power in this but after I finally finish my last 3 GCSEs, Ill give my 11 year old power hungry kid some opportunity to impress me.
@NaviSim101
3 ай бұрын
Tried this. It didn't work on my system (Nvidia 1660ti gfx). Brought frame rates down to 0 or 10/13 on the Draw Scale. Will be getting a refund from Steam.
@swxzizi9962
3 ай бұрын
Does anyone know how to fix? Mine works amazing it's just when I scale and look around my display becomes wavy..? like waves on my screen which makes it unpleasant to use
@phantom68
3 ай бұрын
OK I do not want to raise my hopes up as I have never, ever been able to get framegen to work correctly (high artifacts, stutter, frame issues, crashing, no multi monitor support, not able to show panels on the screen like charts as they got affected, etc). Having tried Lossless Scaling at first I had an issue with colours which I resolved by activating HDR and then I had freezing issue which I was only able to solve by changing the API from DXGI to WGC (not sure what is the difference between the 2 and I have not tried the GDI as I do not know what differs between all the options). I was able to get the fenix at the gate of EGKK (panel status all ready), maxed the graphics to ultra, added traffic injectors, moved a couple of instruments panel to another monitor and so far seems to be OK. It stutters a little if I use the arrow keys to move inside the cockpit but the rest seems to be OK, just some light artefacts. I have not moved or completed a flight which I may do later and, as I am unable to show the Lossless FPS, I cannot tell how the sim is performing but I can see using the MSFS dev mode display frame that i get 15 fps and if I move the camera only 12/13 fps yet it does not feel like it is running at 12/13 fps or 15 fps but at much higher frame rate so I guess the mod is doing what it needs to do. It would be interesting to see what happened during a full flight but fingers crossed this seems to be the first frame gen mode that works for my 3080 without all the issues I had with the nexus mod. Thanks for the video Captain.
@antonious6191
3 ай бұрын
How do you do the things in NVCP on AMD? because you said it was compatible with AMD :)
@grahamr8930
3 ай бұрын
looks great for 2d but does it work in VR ?
@oliverbarth4699
3 ай бұрын
Hi all. Is it possible to start/use the program somehow outside of Steam? Steam has to be running in the background all the time. An additional resource burden for the PC. But still very easy to use. The only small drawback is that the mouse cursor is a little "jerky". @IslandSimPilot In the video you have an option to select your graphics card. I don't have that. Only automatically.
@Empire24453
3 ай бұрын
Is there away to remove the black border that takes up the rest of the screen - I want to able to use this software while the sim is in borderless and in a small window, since I use a single screen, my flight sim is in small window mod and then I have other programs displayed behind the sim that I can always see it as well as I fly
@xkoote
3 ай бұрын
Same for me, I would have liked if it behaved the same as a normal window with the blue bar on top. I tried clicking "Windowed Mode" button, but it is still the same. Notwithstanding, I had it ON -- with -- FrameGen enabled on a 3080Ti and even though there was some jitteriness, it worked.
@thomasjames4109
7 күн бұрын
The single greatest FPS improvement ever made to the MSFS experience. Phenomenal presentation and truly helpful. Nicely done! Thank you!
@ClouDAction.
3 ай бұрын
You should probably record it at 60fps instead of 30fps to give us a chance to see the difference. (;
@mikevadnais7722
3 ай бұрын
*** LONG POST - ALL SETTINGS BELOW *** I just want to say when I first installed this, I was having a lot of issues with screen tearing, was driving me crazy. I decided to just give up last night with it, and was going to return to my previous settings that were acceptable for me. After waking up this morning, I decided to give it another shot, but the first thing I did was reboot my machine. After doing that and going into the sim and clicking the scale button, life was getting better. the tearing was gone! Settings still needed work. Long story short, after playing with more scenarios than I can count, I came to a medium that is very acceptable, and this thing really is smooth as butter now. The big test is sitting on the tarmac in Drone mode. Find yourself a bunch of light poles, and line yourself up in front of them, then select the "A" and "D" keys on your keyboard and go left and then right. If it's setup correctly, the poles will not blur at all. This app took all the blur out of everything. I had issues running the normal Frame Gen program before and went back to TAA and DX11. This app lets me go back to all the original setting for Frame Gen, but runs much better. I have the same card as ISP, so I put the time in and it was worth the results. I have provided all of my settings for anyone out there that may be having trouble. You could try them and see if that helps you out. SPECIFICATIONS: NVIDIA GeForce RTX 3080 Ti 13th Gen Intel(R) Core(TM) i9-13900K 3.00 GHz NVIDIA Driver version: 552.44 Lossless Scaling 2.9 MODE - X2 (Note: X3 was choppy even with my 120Mhz monitor as configured with this tutorial) NVIDIA Control Panel 3D Settings - Manage 3D Settings Global Settings Image Scaling - Off Ambient Occlusion - Off Anisotropic filtering - Application-controlled Antialiasing - FXAA - Off Antialiasing - Gamma correction - On Antialiasing - Mode - Application-controlled Antialiasing - Setting - Application-controlled Antialiasing - Transparency - Off Background Application Max Frame Rate - Off CUDA - GPUs - All CUDA - Sysmem Fallback Policy - Driver Default DSR - Factors - 2.25x DL DSR - Smoothness - 60% Low Latency Mode - Off Max Frame Rate - 60 FPS Monitor Technology - G-SYNC Multi-Frame Sampled AA (MFAA) - Off OpenGL GDI compatibility - Auto OpenGL rendering GPU - Auto-select Power management mode - Prefer maximum performance Preferred refresh rate (Acer X34P) - Application-controlled Shader Cache Size - Unlimited Texture filtering - Anisotropic sample optimization - Off Texture filtering - Negative LOD bias - Allow Texture filtering - Quality - Quality Texture filtering - Trilinear optimization - On Threaded optimization - Auto Triple buffering - Off Vertical sync - Use the 3D application setting Virtual Realty pre-rendered frames - 1 Virtual Realty- Variable Rate Super Sampling - Off Vulkan/OpenGL present method - Auto Program Settings - MICROSOFT FLIGHT SIMULATOR Image Scaling - Use global settings Ambient Occlusion - Not supported for this application Anisotropic filtering - 16X Antialiasing - FXAA - Use global setting (Off) Antialiasing - Gamma correction - Use global setting (On) Antialiasing - Mode - Use global setting (Application-controlled) Antialiasing - Setting - Use global setting (Application-controlled) Antialiasing - Transparency - Use global setting (Off ) Background Application Max Frame Rate - Use global setting (Off) CUDA - GPUs - Use global setting (All) CUDA - Sysmem Fallback Policy - Use global setting (Driver Default) Low Latency Mode - Use global setting (Off) Max Frame Rate - 40 FPS (NOTE: Started at 60, was choppy. Lowered it in 5 FPS increments until it became smooth to my liking) Monitor Technology - Use global setting (G-SYNC) Multi-Frame Sampled AA (MFAA) - Not supported for this application OpenGL GDI compatibility - Use global setting (Auto) OpenGL rendering GPU - Use global setting (Auto-select) Power management mode - Use global setting (Prefer maximum performance) Preferred refresh rate (Acer X34P) - Use global setting (Application-controlled) Texture filtering - Anisotropic sample optimization - Off Texture filtering - Negative LOD bias - Clamp Texture filtering - Quality - Use global setting (Quality) Texture filtering - Trilinear optimization - Use global setting (On) Threaded optimization - Use global setting (Auto) Triple buffering - Use global setting (Off) Vertical sync - Use global setting (Use the 3D application setting) Virtual Realty pre-rendered frames - Use global setting (1) Virtual Realty- Variable Rate Super Sampling - Not supported for this application Vulkan/OpenGL present method - Use global setting (Auto) NVIDIA Control Panel - Display - Change Resolution 3440 x 1440 (native) Refresh Rate: 60Hz My monitor (Acer X34P) can run 120Hz, but the screen was very jittery with Lossless Scaling activated. That is why I lowered it to 60Hz. Microsoft Flight Simulator - General Options - Graphics Display Mode - Full Screen Full Screen Resolution 5160X2160 (NOTE: Using DSR 2.25) Anti-Aliasing - NVIDIA DLSS SUPER RESOLUTION NVIDIA DLSS SUPER RESOLUTION - QUALITY NVIDIA DLSS FRAME GENERATION - OFF AMD FIDELITYFX SHARPENING - 100 V-SYNC - ON (NOTE: Turning this off, the screen was really lagging) NVIDIA REFLEX LOW LATENCY - ON FRAME RATE LIMIT - 50% MONITOR REFRESH RATE (NOTE: At 100% the screen was lagging and not smooth) DIRECTX VERSION - DX12(BETA) TERRAIN LEVEL OF DETAIL - Running it at 170. Personal preference. I can run it much higher without a lot of issues, but the visuals are fine for me where it's at. ANISOTROPIC FILTERING - OFF
@MartinGraeff
3 ай бұрын
Unfortunately doesn't do well combined with Reshader. Crazy colors.
@Lone_GamerUK
3 ай бұрын
Doesn’t work at all for me and terrible and makes things worse and stutters - I think you need a decent starting for first before you use - mine half a my normal rate then triples or doubles (using an old gtx 970) so waste of money for me - the stutters and stuff it better without busing this but I think for many more recent cards will get diff performance
@oliverf944
3 ай бұрын
does it work with VR?
@Elchameau504
2 ай бұрын
it makes demanding game run way smoother too if you have like 50-60 like me in like cyberpunk, i lock it to 48 and use x3 so i have stable 144 fps which is my screen refresh rate, and it looks amazing ( not perfect but considering the uplift not that big of a deal )
@NunoOliveira-c2t
3 ай бұрын
Hi, After clicking in SCALE button, it asks to do something manually concerning the game window. I see exactly the same frames with or without loseless scaling. Maybe I am doing something wrong... Any help?
@eldany96
2 ай бұрын
Love your videos bro! I love this program when it works but for some reason it frequently freezes my screen and screw up my flight. Im running with a RTX4080
@disco79stu
3 ай бұрын
It increases FPS significantly for me, but it introduces stutters. Without LLS, everything is very smooth, when I turn it on FPS go up but looking around in the cockpit is very stuttery. I have frame gen turned on in MSFS. any ideas?
@FlyingAce63
3 ай бұрын
Can Lossless Scaling be used with MSFS AutoFPS simultaneously? Also, does MSFS have to be run in windowed mode for Lossless Scaling to work properly or will it also work in Full Screen mode?
@Flying_With_Nico
3 ай бұрын
Can I use this on a 49inch 240hz monitor. If so what would my settings look like cause everytime I try this it locks my MSFS fps at 30 and stutters everywhere
@tengenemeke
Ай бұрын
I hope MSFS also get some workload on CPU. Most of the time I have 95% up GPU usage. CPU is always below 30%.
@ecodeltaavia
2 ай бұрын
I just don't understand why here on my monitor the simulator is very bright, the lights are blown out, the sky can even see the galaxies when I turn on the ducky there, kkkk, I don't know what it can be, but it works fine, too bad I have this problem of the simulator being very bright, just turn off the ducky and it returns to normal, I hem ....
@TheJmebe
3 ай бұрын
In my experience, things that seem to be too good to be true, often bring some marginal improvement. However, having had to reinstall the game twice in 6 months, I'm sticking with balancing the in-game options, Nvidia control panel options, basic Windows optimisation, Bios optimisation and then incremental hardware upgrades (although these need to be balanced - upgraded from an overclocked GSX960 to an RTX3060 v2 with mild overcoming, to only get maybe 5fps improvement). Sticking now until FS2024 released before evaluating anymore time/cost investment...!
@IslandSimPilot
3 ай бұрын
There is some wisdom in that, my friend. My sim, no matter what I do, never falters. I am constantly trying out things, programs, settings, you name it. I never have problems. But were it not for the nature of what I do on this channel I would get it set up the way I like it and leave it alone.
@fredoplayinggames
3 ай бұрын
Strange, i dont get even 1 fps more. Tried both fullscreen and windowed, did the max fps settings in NVCPL. The only thing i got is CTD :)
@finsent0
3 ай бұрын
Saved my life! You are legit. Thanks for sharing and all the effort involved.
@danaraj-z3c
3 ай бұрын
hi there, if anyone would help, i have ryzen 7 5700x with rtx4060 but in my preferred gpu in lossless setting is only left with 1 option and that is auto
@Wests1908
3 ай бұрын
HELP HELP!!! Ivepurchased this and followed instructions to the letter. When I turn on Lossless Scalling the screen freezes and I get very very slow frames 0-7. The only thing I see different is that I cannot select my Preferred GPU. (3080TI) My only option is "Auto" What could be wrong???
@Empire24453
3 ай бұрын
Same, I also get black screen
@MrSpeaker69
3 ай бұрын
Ya me too. Black screen or it just freezes. Down to like 3 to 4 fps.
@Wests1908
3 ай бұрын
@MrSpeaker69 This shits me. The least this guy could do and try and assist. I've reached out to him on discord also. No reply
@swedishguyflies9077
3 ай бұрын
I find the mouse very jerky and its weird going from one screen to another. Not smooth at all for some reason.
@fsflyer123
3 ай бұрын
I’m finding that the frame gen mod has much lower input latency than this with about the same fps. Anyone else having the same experience?
@vitolam410
2 ай бұрын
hey would like to ask if I can use this with the frame gen for Rtx 40 cards as well? like base frame gen + this software frame gen?
@PepuDrummer527
3 ай бұрын
Maybe I didn't hear the answer but, did you mentioned if you're still using the Holy Grail settings with this?
@Suna.X
3 ай бұрын
I downloaded it and set to x2 then it went from 25fps to 60fps. But the stuttering was awful! Unplayable. Any ideas why? 3080gpu Ultra settings msfs
@_nivlqC
3 ай бұрын
Im guessing its the settings you have, since not everyones computer is the same, you may need to change settings based on your computer needs
@macbrush
3 ай бұрын
Does it work on side monitors? MSFS DLSS and Frame Generation only work with the main window, side windows still are slideshow in comparison.
@bodyspike
3 ай бұрын
No it doesn’t. Only on the main monitor.
@honnunogskartinnrettingakl1059
3 ай бұрын
@@bodyspike Are you sure, i found some info online stating that it supports multi monitor setup, is that maybe just when you have your monitors in surround in the nvcp?
@saminaneen
3 ай бұрын
@IslandSimPilot, YOU NEVER mention, or anybody else, ever mentions, what about AMD video cards. Will this work on a AMD Radeon RX 5700 XT graphics card, which I have. I installed your MSFS 2020_AutoFPS, but I have not checked my frame rates yet, I usually get only 30 frames per second, on this card.
@IslandSimPilot
3 ай бұрын
I never mention it except in the thumbnail 😊 Yes it will work on your card.
@tspryaviation
3 ай бұрын
@@IslandSimPilot what settings would you recommend for a 5700XT and a R7 5700X. Currently getting 20-30 fps on a 165mhz 3880×1440 monitor
@swerv222
3 ай бұрын
I dont think you can record loseless scalling btw we cant see a difference
@kennypr
3 ай бұрын
NVCP setting on AMD GPU ? Can you guide AMD users on that settings??
@travelplanetireland9955
2 ай бұрын
guys i m loosing myself max ffs with 4060 is 16 and everything on high
@hopeless128
3 ай бұрын
If I hadn't subscribed to this channel and therefore watched this video I would never have known this applied to non steam games too... I wonder how many others thought the same, thanks for clarifying this
@kennetha6594
3 ай бұрын
It works for most games, and even for videos too, KZitem, vlc et al.
@hardleftbank
3 ай бұрын
A fan. Could you share a link to where we can find this? Or how do you use this (or download this) if you have the store version of msfs?
@LorenzoFrausto
3 ай бұрын
It’s on Steam
@ktdesign3407
3 ай бұрын
Does this work in VR?
@darrellc8366
3 ай бұрын
is there away to apply this to VR
@hrvojebartulovic7870
3 ай бұрын
Does it work in DX11???????
@LorenzoFrausto
3 ай бұрын
Yes
@Aza35617
2 ай бұрын
Hi Mate, Thanks for the video, Legend, I run a 4070ti with 10700k cpu and a g-sync monitor, I have lossless scaling working absolutely perfect with it UNTIL I use GSX, it brings lossless scaling to a freeze, literally, I have to end it by using my hotkey and then it’s back to normal, as soon as I Request any gsx feature it grinds it down, then when the passengers board “fenix” it breaks down, it seems it hates GSX, I’ve tried everything I can think to fix this, have you heard of this or no of Any fix?
@IslandSimPilot
2 ай бұрын
I have heard of this with GSX, to my knowledge there's no solution.
@gregson99
3 ай бұрын
only reason I would use this is for VR and I guess this wont work for that unfortunately
@shinkicker404
2 ай бұрын
So you need to completely uninstall the FrameGen mod, right? I've been having issues with that mod, it seems to disable itself every like 2nd or 3rd time I run the sim and I need to go play with a couple files to get it working again (and I've no idea why it does it) so I want to try this app out. Running a Samsung G9 at 5120x1440 with a 3090 and its okay, but it really shines with the mod when it works. So I hope this will too. I shall have to try out the 40FPS limit as I've got the monitor set to 120fps.
@IslandSimPilot
2 ай бұрын
No, you can use the FG mod and Lossless Scaling. I may have an alternative way to install the FG mod for you soon!
@davidtsw
3 ай бұрын
Haha another tweak? Damn, you must be getting like 400 fps by now
3 ай бұрын
Lossless is a game changer for me, since I have a GTX 1660 Super and I can get a little bit more than 30 fps. So, 60 fps with LL. A good tip here: turn off VSync, fix 30 fps on driver settings and also Fast sync mode on VSync options. It will run with no stuttering and fluid.
@IslandSimPilot
3 ай бұрын
Glad to hear that it's working for you!
@Mint_Bohe
3 ай бұрын
Turn off in-game vertical sync and set vertical sync in NVIDIA settings to fast?
3 ай бұрын
@@Mint_Bohe Yes, fast mode on NVidia driver is better than using normal VSync (in-game or driver). It reduces the input lag.
@MrStatsfreak
2 ай бұрын
Great video, but I wonder if you can offer some advice on my issue. When I start Lossless Scaling my screen image changes to a very dark image, almost as if the contrast and colours have been turned way dark. I do have a Nvidea game filter set up that I occasionally use for MSFS, but it's not anything like the results which I get when starting Lossless Scaling. I know in an earlier video you did about Lossless you did you had a similar sounding result but you haven't mentioned it lately so I'm wondering if you've found a solution you could share. Thanks.
@IslandSimPilot
2 ай бұрын
Hey Ken, I’m not familiar with that happening. That’s odd. Let me think about that. I don’t think I’ve hear me of it happening.
@nouraiz1990
Ай бұрын
Great app. I can now fly at jfk at ultra settings at 60 fps.
@Morst434
2 ай бұрын
Any chance you Can do a revisor after the lossless Update?
@basilrug
3 ай бұрын
Hi..great video.. I tried this, but quick question, I have 3 monitors.. does this apply to all 3 or only the center monitor..when this is enabled I can only move my mouse on the center monitor? When it's off I can move the mouse to any monitor? Thanks for your thoughts..
@basilrug
3 ай бұрын
Never mind.. found the setting.. it does support MM..great.
@kevinfiranda
2 ай бұрын
Any solution for using Lossless with SLC or PACX?
@gordo1271
3 ай бұрын
Hello sir Ponce Mercedita airport is out in the marketplace
@jorgecucalonf
2 ай бұрын
We need some info on what the in-sim MSFS settings should be.
@andrenertz1685
3 ай бұрын
Can I use DX11 with the app or is it DX12 only like the mod?
@B3burner
3 ай бұрын
I use DX11, and it works fine.
@thegreathadoken6808
3 ай бұрын
I have a 4070, so I get to use DLSS3 framegen, but with x3 framegen on this application, testing in the PMDG 736, I just got done with a flight where even with DLSS3 on my FPS were tanked in the mid 20s. With this I just tried and the FPS were in the high 80s, low 90s. I'd like to test this with a full flight forst before I say anything permanent, but it might just be for real, this thing. Even for those with GeForce 4000 cards. There IS a little extra blurriness with this, but I think it's worth it I'll take it happily as of right now.
@mangaas
3 ай бұрын
I got a question, if I'm manually hard-capping my FPS to 120 (through Nvidia settings), but I have a game that dips below 120 fps during hectic actions scenes, and I enable this, is it wasting resources generating extra frames above my frame cap? Or will it stay capped at 120, and then only "kick in" with the frame generation when my frames start dipping? The game is pretty much running at a perfect 120fps 90% of the time, I don't need it doubling my FPS all the time, beyond what I have hardcapped. It would be an awesome way to avoid any frame input latency when the game is running smooth, so you'd only notice any slight input latency when the frames start dipping, even thought visually, my FPS just stays hard locked at 120. I got Selaco, which is CPU heavy, so when you put all the destruction and debris up to max and start fighting multiple enemies, you notice frame dips as the smoke and debris starts piling up. I'd love to use this to kinda only "kick in" as my frames drop below my hard cap, and then when my hardware goes back to the normal 120, the input latency and frame generation kinda stops, since I don't need extra frames above the 120 hard cap.
@paullee3885
3 ай бұрын
Hi There Fantastic Video much apreachiated I have it up and running and its excellent its managed to improve smoothness even with my 4090 One quick question Do you have the ingame Fram Gen Running while using this ? Not 100% sure what is best to do Many Thanks Paul
@kiniuber
3 ай бұрын
so I follow yours tutorial setting for fs2020 and here is my result ,latest lossless scaling ver2.9 mode x2 rest of the setting like you have now my setting on the game resoultion 4k 3840x2160 taa render mode all the nvidia setting as yours my card 3080 funder edition here is the fact : before using this lossless program I run pmgd 737 on addon airport at 30 fps outside viev after run the lossless software frame drop to 7fps !!!!! no mater what mode is use 2x or 3x this software in my system reduce the performance 3x I don't have a time to deal wit the sim setting to make it work I want run the program I pay for and have some extra fps no need any double jump in performance but a few extra fps would be enough what I experience is just reducing the sim fps x3 time not good at all!!!!
@IslandSimPilot
3 ай бұрын
Running at 4K is tough, what is your monitor refresh rate and your frame rate limits?
@kiniuber
3 ай бұрын
@@IslandSimPilot 60hz frame rate limit half of the refresh rate 30 and without the loss less program in many case keeping this 30 fps only on the heathrow by ini build frame drop to 14 fps but I didn't expect having reducing performance after purchasing the software which should give you a boost
@antoniopettini9503
3 ай бұрын
I noted that in the game profile column you have MSFS. I have just default. How can I add MSFS?
@IslandSimPilot
3 ай бұрын
Hey, click add at the lower left and then search for your flightsimulator.exe file. Should be in C:\XboxGames\Microsoft Flight Simulator\Content
@FlightSimCFI
3 ай бұрын
Does anyone know what’s going on with the Nvidia filter? My colors get over exposed even with the filter selected off. I have to make a filter where brightness/ contrast is turned way down and it still looks weird
@gamechanger2324
3 ай бұрын
It says I need admin privilege's to hook it to MSFS 2020 but it will not allow me to change. BTW I am the admin so I don't understand what is going on. Can I get some assistance please?
Пікірлер: 402