I don't think anyone ripped off anyone, but somewhere in China there is a factory building these units and sticking badges on them for western distributors. I am quite impressed with Triton tools not to bad for the money. I used cheapo belts from Amazon on mine and they work great.
@CasualDIY
Жыл бұрын
That's the case with so many products
@bryandavies6074
4 жыл бұрын
Nice update Tomas. A review 2 years in carries more weight than 1st impressions. Thank you.
@CasualDIY
4 жыл бұрын
That is true and it's nice to compare it to the initial thoughts and impressions.
@mravx2993
4 жыл бұрын
I don't know who made the original design of the machine, but starting at (IIRC) 100 units you can buy them directly from China in your favorite color combination. Scheppach OSM600, Güde GSBM450, Holzstar OBSS 100 are the same and sold here(Germany) from (former) reputable brands. Alongside those are "copies" from (at least) Festnight, mewmewcat, vidaXL, Sealey, WEN. The Ridgig one is very similar, but has a guide rail in the table top. I'm happy with my Scheppach I bought a few weeks ago, price was the major factor for me as I got it for 160€. Parts seem to be interchangeable completely, so buy the cheapest you find unless you prefer a certain color.
@CasualDIY
4 жыл бұрын
They are probably all made on the same Chinese factory lol
@davidschwartz9636
Жыл бұрын
Thanks for making this video Thomas. Unboxing videos are all well and good, and show what you get with a piece of equipment. I however think, reviews of tools after they have been in use are equally, if not more important.
@CasualDIY
Жыл бұрын
Exactly that's why I make these videos to highlight any potential issues I had.
@wildatlanticwood
2 жыл бұрын
I had to make a comment on this sander. I hadn't noticed the beveled lip on the bottom of the belt sanding attachment before because I just slapped it straight on and it never came off but I had noticed I wasn't getting 90 degree edge sanding even though the table had been leveled but this makes sense now thanks. I bought one of these sanding machines myself about a year ago. I already had a Scheppach bobbin sander but I needed an edge sander so decided to give the Triton a go. My first impression was that the machine was extremely light and plastic feeling even by comparison to the Scheppach which is the same size but has the cast iron table. If you want to be able to move the machine around then the lightweight is fine, to use the sander you really need to secure it to a workbench otherwise it will push away from you as you use it. The machine itself works fine and the dust extraction isn't that bad if you connect a shop vac, its better than the Record BDS250 whose dust extraction system is useless, (I have one of these also it is a good sanding machine and has a lot of power). The sanding belts for the Triton are also widely available in hardware shops since they are the same belt used on the large Makita belt sander 100X610mm and this was one thing that appealed to me about Triton since I already had a Makita belt sander. Most of my work is quite small and a lot of the sanding I do involves having to move the workpiece as I'm sanding it to say round over corners, sanding curved surfaces, or if the workpiece is say 30cm or longer this is longer than the belt surface area so you need to keep moving the workpiece back and forth to sand it. This is where another problem arises, the black finish on the Tritons table comes off and badly marks the underside of the workpiece so you need to resand this somewhere else. The ridges molded into the surface of the sander's table can also catch on smaller pieces being sanded as can the join between the fixed and tilting parts of the table. To solve this problem I just screwed a veneered piece of 1/4" ply on top of the machine's worktable and waxed the surface, happy days. The machine does not have a lot of power and can get bogged a bit down with larger workpieces or if you apply much pressure. Unfortunately, my Triton seemed to give up the ghost and stopped working properly I pulled off the bottom and found one of the motor bushes badly worn and the contacts on the armature blackened. The bushes, and other parts, can be bought online which is very good and I've ordered a pair + I cleaned the contacts so hopefully, this will do the trick as I would hate to lose the Triton it is handy, I have however ordered a large floor standing Jet OES80C oscillating edge sander since the small Triton is too limited on what I can sand with good results. I hope someone finds this comment useful as a lot of the reviews for this, and other machines, are made by people who have just received the machine but not actually used it.
@CasualDIY
2 жыл бұрын
I've been using the machine for few years now and apart of the bushes I had no issues of which you mentioned. I still think after the years that this is a brilliant tool ( and yes I bought it for my own money ). But I guess it depends on the use and the user. This is for sure no industrial unit. But for general DIY and the price I think its great
@wildatlanticwood
2 жыл бұрын
@@CasualDIY Thanks for your reply, I agree they are a good machine for the money especially if you can get one at a sale price. My comments were based on my own personal experience. The black paint coming off the sander's table was a real problem since it's been used as a finishing sander and if you're making products to sell you don't need something adding more time and work ie extra sanding to get rid of the black marks. Also, I need a sander with a flat table surface so I can easily move my workpiece as I'm sanding it the bumps and ridges on the Triton's table were again causing a problem. As you say it depends on what you want from the machine.
@petercox8476
2 жыл бұрын
I was so frustrated with not getting good 90 degree sanding and couldn’t understand why! Thanks for the video and information 👍🏻
@CasualDIY
2 жыл бұрын
Thanks for watching 👍
@malcolmmarks7374
4 жыл бұрын
I have had mine for about 2 years also Tomas and the first thing I did was to make an adapter to the dust extraction port to make it fit my 4” hose. Now it’s fantastic.
@CasualDIY
4 жыл бұрын
Yes they seem to work without any issues even after few years of use
@kluzz
3 жыл бұрын
Thanks for showing the belt sander ledge issue. I've been struggling with this exact thing since I bought the machine!
@CasualDIY
3 жыл бұрын
Thank you for watching my video👍
@LordPadriac
Жыл бұрын
Neither one stole it from the other. It's produced by the same company in China for anyone that wants to pay to have it made in their color. Not one single one of the companies selling it came up with the thing. The only differences you'll find come from the amount of quality control and basic quality the different companies felt like paying for. The Harbor Freight (no longer available) and the Wen version for instance are trash. Much of the machine has been replaced by plastic, the motor is weaker, the method of securing the angled portion of the table is weaker, etc. There's even the Grizzly version, which in general works quite well, but for some reason the belt turns in the opposite direction from how every other sander on earth goes. I'm shocked to say this but the Rigid one is actually the best version of them I've seen.
@MichaelCampbell01
2 жыл бұрын
The Ridgid version of this sander uses left hand thread for the spindle lock (!?!?) and it also gets stuck all the time. There are a variety of special wrenches that people have designed to 3d-print for this.
@jeffstanley4593
Жыл бұрын
I have the Triton and have never used anything but my fingers on that knob. Sounds like you people are way overtightening.
@FishingforViews
3 жыл бұрын
Every time I think about buying a tool I always find a video from you, Top content and been a subscriber for a while now 😊 another good video and thanks for the info
@CasualDIY
3 жыл бұрын
Thank you very much, I'm glad I can be some help😀😀👍
@MrHighflyingclive
4 жыл бұрын
I have also had my Triton sander for about two years. I use it a lot! I thought that the supplied belts were bloody awful - the seams were lumpy and set up huge vibrations, which made it difficult to hold the workpiece. Even worse, they left a convex surface on the wood! I don't understand how this is even possible, but that was my experience. I switched to belts from Abtec and both problems went away. I find that dust extraction when using the spindles is acceptable. But much less so when using the belt. So I made a simple hood for my machine, simply by cutting a plastic storage box in half. I considered various methods of securing this hood, but in the end, didn't bother. The hood is happy to just sit over the belt and doesn't move, unless I want it to.
@CasualDIY
4 жыл бұрын
Fortunately for me never had those issues to be honest. But I need to make something to improve the dust extraction 🤔
@paulrowley71
3 жыл бұрын
Thanks for the video. My machine is being delivered today so good to hear that it’s a good machine. Cheers. 👍🏻
@CasualDIY
3 жыл бұрын
Hehe hope it will serve you well👍
@steverees1936
2 жыл бұрын
Hi Thomas, Just came across your video by chance and great review btw. I am looking to buy an Oscillating Belt & Bobbin Sander and have one saved on Amazon on my tools list. One thing that I have noticed is Sealey, Triton and Clarke all seem to be of the same generic design with the same power unit. Only differences is the manufacturers colour, the table seems to be of aluminium construction on both the Sealey and Clarke models and appears to be plastic on the Triton. Price difference at time of this is Clarke £266, Sealey £300 and Triton £204. That's a huge difference in price for what appears to be the same unit, so thanks for sharing your review video.
@CasualDIY
2 жыл бұрын
Thank you. The Tritons table is aluminium not plastic. Unless there's a new model with a plastic table 🤔 Mine is aluminium 👍
@steverees1936
2 жыл бұрын
@@CasualDIY ah that's good to know and thanks for letting me know.
@wildatlanticwood
2 жыл бұрын
@@steverees1936 The machines are all probably made in the same factory in China or somewhere and just coloured and branded for the different sellers.
@LuteandTheorbo
4 жыл бұрын
Those reviews after some time are a great idea and fun to watch! Oh, by the way: i fixed the issues with my rage 5: i sold it 😂now waiting for the Dewalt 7492 to be delivered 🥰 Anna
@CasualDIY
4 жыл бұрын
Hehe I'm yet to experience the illusive Dewalt quality experience 🤣🤔
@michaelevans1658
4 жыл бұрын
@@CasualDIY As with most things the newer versions not as good as the old ones . Mine 8 years old no problems.
@creepycrawlything
4 жыл бұрын
Very decent review. You've got me thinking that maybe I could justify buying one, if and when I've got the space to store and use it. Being able to get pattern belts and sleeves would be another big in the Triton's favour. Again, good and useful review.
@CasualDIY
4 жыл бұрын
Thank you for watching 👍 From my perspective I would struggle with my work flow and efficiency without it. Makes the sanding chore a bit easier
@briansworkshop01
4 жыл бұрын
As always Tomasz good honest review thanks for sharing and remember stay safe and make thanks 🍺🍺👍👍
@CasualDIY
4 жыл бұрын
Thanks mate, all the best go to you and the family. Be safe 👍
@MrTimmmers
2 жыл бұрын
Bolt on a sheet of steel, hen you can use magnets.
@Alastair_Freebird
3 жыл бұрын
Helpful summary thanks, told me what I needed to know
@CasualDIY
3 жыл бұрын
Thank you for watching 👍
@markjarman7819
3 жыл бұрын
Nice honest review. Also nice you have returned a comment to most of what people wrote😊
@CasualDIY
3 жыл бұрын
Thank you, I do try😁
@Nigel-Parry
4 жыл бұрын
I’ve got one and am also pleased with it. I hadn’t noticed the ledge at the bottom on the belt...off to check !
@CasualDIY
4 жыл бұрын
Hehe that means you set it up correctly not like me 🤣
@Nigel-Parry
4 жыл бұрын
Casual DIY Ha - now if only I could get that lucky with my Titan P/T - planer is sooo frustrating on workpieces over 150mm - about to launch mine out of the window ...
@CasualDIY
4 жыл бұрын
@@Nigel-Parry hehe you must be very strong lol
@Nigel-Parry
4 жыл бұрын
Casual DIY indeed
@rosalindacaseley6996
3 жыл бұрын
Looking at getting one of these, good to see a used model review. Excellent video dude, subscribed!
@CasualDIY
3 жыл бұрын
Thank you kindly and welcome aboard 👍😁
@linadecaseleycarloss5838
3 жыл бұрын
@@CasualDIY Added question - where do you buy the spare belts & drums from? I am having a devil of a time trying to locate them...
@CasualDIY
3 жыл бұрын
Same. And they are expensive. I get mine off Amazon 👍
@jeffstanley4593
Жыл бұрын
Do not get the Ridgid. It has only one tightening knob for the tilting table. The Triton has two, one on each side.
@tonkatoy200
3 жыл бұрын
These machines are all imported from China, just with different badges and quality control. Ridgid however probably came up with the design but the Triton seems to perform better! There are several manufactures copying this design
@CasualDIY
3 жыл бұрын
Yes it looks that way🤔
@Adamfront
2 жыл бұрын
Tried to watch this video but the advertisements were on a loop. They never stopped. You should have a word with youtube or vodafone.
@CasualDIY
2 жыл бұрын
Unfortunately I don't have any control over that. Just watched the video and I had no issues. Maybe its on your end?
@t-rex4211
Жыл бұрын
I’m on my second one of these. Had a replacement as the bobbin stuck down. Second one is just out the year warrantee and doing the same with less than 2 hours work. I’ve opened it up and the whole Bobbin mech is shite system. Buy something else is my advice
@CasualDIY
Жыл бұрын
I must have been lucky with mine. Still works great after all those years of usage
@vincentdeblieck9320
4 жыл бұрын
Nice review, looking for this type of sander since a long time thx for the review!
@CasualDIY
4 жыл бұрын
Thanks for watching 👍😁 hope my video will be off some help
@DuncanEdwards.
4 жыл бұрын
With my Trend T35A vac I get almost zero dust, I also use Mirka Abranet belts, they last absolutely ages
@CasualDIY
4 жыл бұрын
Abranet belts? Didn't know they make belts🤔 got any links by any chance please?
@DuncanEdwards.
4 жыл бұрын
@@CasualDIY Search for Abranet Max 100mm x 610mm Abrasive Belts, got mine on eBay
@CasualDIY
4 жыл бұрын
@@DuncanEdwards. thank you I will
@user-lu4xh8ms9r
2 жыл бұрын
Thanks for review ! Haven't tried that machine myself yet, but i heard from a friend that sandpaper from beltsander Makita 9404 should be the same size as tritons. Maybe it costs cheaper in your country
@CasualDIY
2 жыл бұрын
To be fair I have bought the cheapest I could get (from Silverline) and it was really bad. Not worth saving the money on it. So now I use the original one or from Abranet mesh
@erol9000
4 жыл бұрын
I have the same, bought it 1 week ago. I have a personal question. I m a chef, the free time I have i got in my garage and try to make stuff with wood. It's not for the money or generate extra income, just anti stress. Now I came to a point thinking, what the hell am I doing. Had you also days like this, ifso, how did you get over it. Thanks and greatings from Belgium 🇧🇪
@CasualDIY
4 жыл бұрын
I think woodworking is a perfect hobby. You can develop new skills, and make some awsome things. Imagine giving someone a gift that you made yourself like a chopping board. That will have much higher value than any other bought gift. Some people watch football, Tv or play games. You dear sir have become a Maker. Be proud of it👍 imagine what things you can make and bring to this world.
@ASCarvings
4 жыл бұрын
Good review sir. Looked at this last month but haven’t purchased yet
@CasualDIY
4 жыл бұрын
Thank you kindly for watching 👍😁
@theweepinghunter
4 жыл бұрын
nice vid thanks for the update I have this tool but have used it used it much
@CasualDIY
4 жыл бұрын
Thanks for watching😁👍 for me after my handheld Makita sander this is my main sander😁
@mhunter8211
4 жыл бұрын
Good review for me as I'm looking to purchase an oscillating sander at the moment. Nice one
@CasualDIY
4 жыл бұрын
Thank you for watching my video, I hope it will be some help👍😁
@billgiles3261
3 жыл бұрын
Mine has been great for all of 4 months. Now the spindle jumps and makes a horrid noise. I am waiting for Triton to come collect and repair.
@CasualDIY
3 жыл бұрын
Hope it will be mended for you👍
@billgiles3261
3 жыл бұрын
@@CasualDIY all boxed up awaiting UPS today.
@CasualDIY
3 жыл бұрын
Let me know how it all went for you. When you get your tool back
@thesilure98
4 жыл бұрын
Great review mate . i just got 10 mixed grit off ebay for about £13.50 free postage
@CasualDIY
4 жыл бұрын
Thanks, That's a good price got a link by any chance please?
@thesilure98
4 жыл бұрын
@@CasualDIY nformation D&D Daily Sale Ltd Dorota Koszycarz 49 Westbury Crescent Dover Kent CT17 9QQ United Kingdom Hi mate this is the address . just type D&D SALES in ebay. hope this helps, if not let me know and ill try another link. Also i had the same problem with the top screw knob gettting too tight so i just replaced the washer with a thicker one and now its fine. good luck and keep posting the vids. cheers dave
@CasualDIY
4 жыл бұрын
@@thesilure98 thanks👍
@GedandMichele
4 жыл бұрын
Love these re-reviews
@CasualDIY
4 жыл бұрын
Thank you kindly for watching 👍
@TheFeFactor
Жыл бұрын
Best viewed at 1.25 playback speed
@vincechoraszewski2394
4 жыл бұрын
I don't know if have a Harbor Freight in your neck of the World, i have a different sander, and i get my sleeve's from them. Good luck!
@CasualDIY
4 жыл бұрын
I'll have to check that out, you never know 😁
@andyhayton7662
3 жыл бұрын
Bought one today can't wait to try it ;-)
@CasualDIY
3 жыл бұрын
Hopefully it will serve you well👍
@HighWealder
Жыл бұрын
Looks like Lidl are going to sell an identical one for 150 quid.
@jimbossimrigs7961
Жыл бұрын
I searched several UK North West stores on the Sunday it was released, couldn't find any. Havent seen any Parkside ones of Marketplace or eBay either. Really wanted a Parkside one as well..
@davidstevensasidewayslook8831
4 жыл бұрын
This is a "badge" bit of kit, available from lots of suppliers under their own label and made in China, I guess its a fairly reliable bit of kit as you've had it a couple of years.... On the noise front anything 80db or above means ear defenders even though it doesn't sound particularly loud on your video. I had and Elu belt sander which was horrendous noise wise so it had to go eventually, even though it was built like a tank it was just too noisy.....
@CasualDIY
4 жыл бұрын
You are probably right, like most of budget type tools. But fortunately this model is quite food and well build 👍😁
@jeffstanley4593
Жыл бұрын
I am in the US and have that model. It is superior to the Ridgid offering in that it has two locking knobs for the tilting table. The Ridgid only has one thus the table is not secure on one side. It will or might not maintain rigidity when you press down on it to sand. I love mine. I found it just the thing to use when " sanding to a line". That is when you rough cut a template for instance and you want to sand it to its final dimension. That ledge you had trouble with, I did not even know it was there. It is a non issue. I have never had to use anything other than my fingers to remove that knob either. I don't know what you are doing wrong.
@CasualDIY
Жыл бұрын
Still one of the best tools in my workshop 👍
@robbroughton8161
4 жыл бұрын
Great video! Love how you help out us wood workers on a shoe string budget. On that I’d love you to give some info on the clamps you use. I’m looking to get more clamps but they’re so expensive!!
@CasualDIY
4 жыл бұрын
Thank you kindly😀 My favourite clamps are the parallel clamps from Bessey. They are expensive yes but they are so good😁 what I did is I bought one per month and after 6 months i got a nice set 😁👍
@amirxzavier2689
3 жыл бұрын
InstaBlaster.
@marcwheeler4406
3 жыл бұрын
Oh pardon not sure if you can get dw40 over there but amazon might be a place where you can it.
@mrlk201
4 жыл бұрын
Great video I think the re-reviews are very helpful. Do you have any recommendations for a router table? I have the Bosch palm router currently. Thanks!
@CasualDIY
4 жыл бұрын
Yes I think these type of videos bring some value and solid information. The only router table I have is the one from Aldi and it's rubbish 🤣 I will be making my own, just buying the needed parts for it. Want to invest in this and make a nice solid router table as I do tend to use routers a lot and often struggle with my current setup.
@mrlk201
4 жыл бұрын
Casual DIY I look forward to it! Have been looking for a way to do box joints, not getting good results with a table saw and no dado blades so want to try the router route!
@Skylinegtrbnr34
3 жыл бұрын
I turned one of my trim routers into a mini router table i clamp it to the vise all you need is 6 to 10mm perspex some epoxy a drill with a sharp bit a rasp and some patience it works quite well samurai carpenter has a video tutorial it can also be used for a guide once you space the holes evenly eventually il build a router table they are expensive but worth it
@Tensquaremetreworkshop
3 жыл бұрын
I note you need a spanner for the bobbins, but not the belt. Could you fit a starwheel on the bobbin too?
@CasualDIY
3 жыл бұрын
not sure
@neilfraser6646
4 жыл бұрын
Check out abrasive world don't be put off by the price shown as it's for 10 sleeve pack ideal if you use a lot of one size
@CasualDIY
4 жыл бұрын
Cool thank you, I'll check them out 👍
@wiseoldfool
2 жыл бұрын
This unit should be available here in Western Australia in about 5 weeks. I don't have a lot of space in my shop, so I think this will serve me well. The on-board storage is very useful in a small shop. I appreciate the insight into the potential issues and the ways to solve them. I love your accent, I get the Polish part, but is the other part Brummie?
@CasualDIY
2 жыл бұрын
Yes Brummie 🤣👍 still works great for me, great tool
@wiseoldfool
2 жыл бұрын
@@CasualDIY So are you familiar with Jasper Carrot? I love his story of the blowke that catched a whale in the cut, but throwed it back cos it didn't huv ony spowkes in it! His Volvo rant is also hilarious! Maybe you've heard of Slade? They're from Wolverhampton.
@CasualDIY
2 жыл бұрын
@@wiseoldfool lol not heard of them, been living mostly in Leicester and Rugby
@David.M.
4 жыл бұрын
Thanks for the review.
@CasualDIY
4 жыл бұрын
Thank you kindly for watching👍
@joaquinvaquero7198
4 жыл бұрын
Thanks for such good review
@CasualDIY
4 жыл бұрын
Thank you kindly for watching my video👍
@Secbra1
2 жыл бұрын
Hello, great video, would you please advise me on the outside diameters of all three spindle washers and weather there is anything special about them or are they just steel washers varying in size? I have the oportunity to buy the same oscilating sander but all of the accessories are missing so I am thinking to make my own while waiting for the sander. Many thanks.
@CasualDIY
2 жыл бұрын
Hi, sorry for the late reply. The washer sizes are 46mm, 20mm, 15mm. They are just normal washers nothing special about them
@Secbra1
2 жыл бұрын
@@CasualDIY Many thanks
@danbarnett8604
Жыл бұрын
They could have made their cuts in their corporate bonuses!
@joshrichmond6426
3 жыл бұрын
Have you not tried screwfix for the sanding belt and sleeves ?
@CasualDIY
3 жыл бұрын
Actually not checked screwfix to be honest
@marcwheeler4406
3 жыл бұрын
Can you use dw40 to make the screw less finicky?
@CasualDIY
3 жыл бұрын
Yes I did and it works for just a short while
@davidstevensasidewayslook8831
4 жыл бұрын
as a PS the cheapest place to buy today is Screwfix @ £189.....
@CasualDIY
4 жыл бұрын
Didn't know that Screwfix had them for sale. Thanks for the comment, could be very helpful to others👍
@IngramMk
4 жыл бұрын
@@CasualDIY Toolstation have these at £170 & the belts are a good price too.
@ukhomewoodworker848
4 жыл бұрын
Awesome vid 👍 strawbyte workshop put me onto you love the channel 👌
@CasualDIY
4 жыл бұрын
Thanks👍😁 hope you will enjoy my content as much as Strawbyte 😁
@jimpike3489
4 жыл бұрын
Hey Tomas, just found your site, looking at a lot of your previous video's. Can I ask if you rate Einhell, I am looking to build a workshop in the coming year and I was going to use Einhell for some of my tools. Any help would be appreciated. Jim
@CasualDIY
4 жыл бұрын
Some of the Einhell tools are ok. For example I got the battery powered drill and impact driver and they are fine. But I also had a table saw and a scroll saw and they were terrible. Overall I would not recommend it.
@jimpike3489
4 жыл бұрын
@@CasualDIY Thanks Tomas, much appreciated.
@bricofast
4 жыл бұрын
Top 👍👍👍 lenghts here from Portugal 🇵🇹
@CasualDIY
4 жыл бұрын
Thanks mate. Stay safe😁👍
@adamdiaz8442
4 жыл бұрын
New subbie great channel quite close to u keep them coming
@CasualDIY
4 жыл бұрын
Welcome aboard 👍😁
@gaborpallosi7600
4 жыл бұрын
Go Tomekkkk!👍❤
@CasualDIY
4 жыл бұрын
Lol
@CementRoots
4 жыл бұрын
AEG in the UK is the same as Rigid in the US (I have the rigid) as for the knobs getting stuck I made a wrench for those and 3D printed it www.thingiverse.com/thing:3389383 also the rigid has a miter track so you can use featherboards and miter gauges
@CasualDIY
4 жыл бұрын
Oh that's cool to know and thanks for sharing. I bet it will come in handy for many. Thank you. You see AEG brand seems to be solid but for some strange reason I don't feel it's main stream enough.
@LuteandTheorbo
4 жыл бұрын
I have a peugeot energy sand 200 and some other small belt sanders and usually buy belts here. This should be the right size for your unit: www.besserschleifen.de/epages/62709580.mobile/de_DE/?ObjectPath=/Shops/62709580/Products/100x610 Have fun, Anna
@CasualDIY
4 жыл бұрын
Thank you kindly 👍
@martinnolan9906
Жыл бұрын
Stay off the weed man. That sander will eat you up 🤯😱
Пікірлер: 145