Just one question, Eddie: How do you know that the cleaning addressed the problem with the pistons? In my case, the cleaning ,new pads, and flush did not solve the problem. The piston seals had to be replaced. Only then did the calipers work 100%. Looking back, I should have pumped the brakes before installing the pads to see that all the pistons moved evenly. Hope you have a great day and safe travels.
@WindyTherapy
Жыл бұрын
Holy smokes Ron ! You read my mind my friend. The honest answer I don’t know if will fix the pistons pumping unevenly so I am planning to remove pads next spring and measure them.
@WindyTherapy
Жыл бұрын
You also said something I just realized next day ….. I should’ve pumped the pistons all the way out after the first cleaning to allow me to clean area that was previously hidden. I was so focus on shooting the video that didn’t cross my mind at that moment.
@WindyTherapy
Жыл бұрын
Thanks my friend! Happy Sunday
@bridgepointseller524
Жыл бұрын
Helpful tutorial Eddie ! Thanks for getting this video done. 🙌
@WindyTherapy
Жыл бұрын
Thanks 🙏🏻! I appreciated it
@danstrong3558
Жыл бұрын
Thanks!! I'm going to take this on now!!
@WindyTherapy
Жыл бұрын
It isn’t hard buddy ! Go for it !
@WindyTherapy
Жыл бұрын
Just check the comment I wrote for Ron which may help you too
@WindyTherapy
Жыл бұрын
Thanks for watching. I hope it helps you. Cheers, Eddie
@KrakensGarageandAdventures
Жыл бұрын
Great job on how to change your brake pads. Your description of playing whack a mole is spot on when pushing the brake pistons. 😂 Great job! PS: Happy Father's Day.
@WindyTherapy
Жыл бұрын
Thanks my friend ! Whack a mole description was my first reaction lol
@WindyTherapy
Жыл бұрын
Happy Father’s Day to you too buddy
@luziiluizth.8742
Жыл бұрын
Hello dear friend ❤️😊 Amazing amazing video sharing ❤️📷 This is great 😃 Really enjoyed watching Thanks for sharing this with us giving another a big Big like thumbs up 👍👍👍👍👍 See you again take care Keep intouch ❤️👍 God bless 🙏🙏🙏🕊️
@WindyTherapy
Жыл бұрын
Thanks a lot for your kind comment and for watching
@gunatv5750
Жыл бұрын
Very nice sharing
@WindyTherapy
Жыл бұрын
Thanks for visiting 🤘 I am glad you liked it
@Moz42
Жыл бұрын
Good one, Eddie. Very useful tutorial. Cheers
@WindyTherapy
Жыл бұрын
Thanks Moz ! I really appreciated Mate !
@Athrottleholic
Жыл бұрын
Great job!!🤜🏻🤛🏻
@WindyTherapy
Жыл бұрын
Thanks a lot buddy ! Just trying to help others.
@WindyTherapy
Жыл бұрын
Happy Sunday
@SHHHMotoTravels
Жыл бұрын
Oh I miss having a garage for DIY projects. To this day, I still don’t do brakes even though I do most everything else ! BTW - New subscriber here ! 😂 (you didn’t state when a person became a new subscriber!!! LOL)
@WindyTherapy
Жыл бұрын
Yes, I don't know how I would feel without a garage. (other than DIY .. We have so much stuff stored there) 😂
@WindyTherapy
Жыл бұрын
I dont mind tackling mechanical but I hate electrical stuff.
@WindyTherapy
Жыл бұрын
When you stop by I will give you beers and steak ! much better than my giveaways. Thanks for stopping by amigo
@SHHHMotoTravels
Жыл бұрын
@@WindyTherapy Cheers buddy !
@elnorteflamenco
Ай бұрын
Thanks, good video. Two questions please. 1- How to support the bike to remove the front wheel? 2- Steps to lubricate the fragiles pivots, shifter and rear break?
@Viper6-MotoVlogger
Жыл бұрын
Yep, piston side usually shows more wear when the pins are not properly lubricated.
@WindyTherapy
Жыл бұрын
I am still wondering if the piston seals aren’t buggered but ….. I will ride this season as is and I will check the pads next spring and go from there.
@WindyTherapy
Жыл бұрын
Happy Sunday buddy !
@Viper6-MotoVlogger
Жыл бұрын
@@WindyTherapy if they don’t leak, they are fine.
@myvictorychannel
Жыл бұрын
I imagine the same principles apply for most bikes? DIY Tip - Do not use your partners toothbrush or you will be in big trouble. Trust me, I know this first hand :)
@WindyTherapy
Жыл бұрын
I can sense experience and the dog house reservation hot line talking ! Bhahahaha
@WindyTherapy
Жыл бұрын
Yes, it is pretty much the same process regardless the motorcycle brand.
@WindyTherapy
Жыл бұрын
Thanks for stop by buddy
@bridgepointseller524
Жыл бұрын
😂😊😂
@SpyderWayne
Жыл бұрын
Very nice DIY Eddie... do you wanna do my Spyder brakes ? 😮😂
@WindyTherapy
Жыл бұрын
Bring it on buddy ! It should be something between a mini van, a sedan or a motorcycle. (Which I’ve done it before)
@WindyTherapy
Жыл бұрын
Thanks 🙏🏻 for stopping by buddy!
@SpyderWayne
Жыл бұрын
Tenth 😁👍
@WindyTherapy
Жыл бұрын
You will be always the tied at 1st with all my good friends 🙌
@larry68hd11
Жыл бұрын
👌👌
@WindyTherapy
Жыл бұрын
Thanks Larry
@KrakensGarageandAdventures
Жыл бұрын
First!
@WindyTherapy
Жыл бұрын
Winner winner rooster wiener ! (The chicken dinner is already copyrighted)
@SpyderWayne
Жыл бұрын
@@WindyTherapyHey... 😳... you better not be referring to my buddy Roosevelt 🐓
@WindyTherapy
Жыл бұрын
@@SpyderWayne Of course not ! He’s a VA rooster 🐔! 😂
@lycioguimaraes346
3 ай бұрын
Estamos precisando de algum telefone para podermos despachar seu mimo, tem como enviar, saiu do insta
Пікірлер: 50