Great video, super motivating. Just got a 2022 Speed Twin, and put a quick 250 miles on it. Went ahead and ordered the Euro taillight and signals......got them today......and found out today that the wiring harness connectors are incompatible with the 2022 model :(. I'm not an electrical splicer, more of a plug and play guy, so back to the distributor they go. Super helpful and fun videos, thanks Adam. Now I wait for the aftermarket or 2022 Triumph parts availability to catch up.
@vanblanco9284
Жыл бұрын
Did you have to get a set of Rizoma FR218B Turn Signal Adapters for the front and rear to install all four of the Rizoma signals?
@rocket3man
3 жыл бұрын
Ha Ha, Adam in the UK the Speed Twin comes standard with the sort of indicators you are retrofitting. The option in the UK is to go to the LED set up you have on your bike as standard - funny old world isn't it!
@jack_alfer
4 жыл бұрын
Here in Brazil the speed twin already comes with LED flashes. but you have to see what model and year this is. But I think that in Europe the 2020 models already come with led
@jeffreycastillo6886
5 жыл бұрын
Does that new wiring harness come with the Euro spec tail light?
@AdamCroll
5 жыл бұрын
Yes
@jeffreycastillo6886
5 жыл бұрын
@@AdamCroll , is T2701236 the only thing you needed to purchase to make the tail light swap? Are there any additional nuts/bolts I'll need?
@AdamCroll
5 жыл бұрын
As far as the tail light, yes it will be plug and play assuming you buy the stock euro turn signals. I bought the rizoma turn signals so they also sell wiring adaptors and mounting adaptors to cover the stock mounting surface because all aftermarket turn signals tend to be much smaller in size.
@Airtouch67
4 жыл бұрын
Hate to say it but those are not very bright at all... can you even see them in the sunlight? Seems dangerous to me.
@dalejones9404
4 жыл бұрын
I actually like the us integrated brake light and signals but thank you for sharing how to do this :)
@bc67
5 жыл бұрын
They look awesome! Very slick. I was doubtful that the replacements would look as good as the stock ones because I like the stock signals. But these do a great job and blend nicely with the overall look of the bike. They enhance the modern aspect of the modern classic design without going over the top. I've seen some aftermarket replacements where the blinkers are too close to the headlight and taillight but that's not the case here. I also like how they light up progressively.
@AdamCroll
5 жыл бұрын
I agree that some are too close in proximity to the headlight! These have an extension accessory to bring them out a bit more if I ever feel they are tucked in too close as is.
@normferguson5209
3 жыл бұрын
Nice look,clean and mean.love your cap!
@raymorris952
Жыл бұрын
Hmmm. Nice indicator's, not sure they suit your bike, to modern for a retro, But hey to each his own, if you like them then cool, thanks for sharing.
@markbledsoe8078
Жыл бұрын
What part # adapters do you need for signal lights ? Do you need them for front and back ? Thanks
@DC-nt3zk
Жыл бұрын
Why didn’t triumph make the seat fit instead of seeing that rounded bar at the back and maybe be able to make more room for a pillion. Enjoyed the video tho
@ShadowCthulhu
2 ай бұрын
I am looking at getting a set of these for my Vulcan S.
@andrewbecker3700
2 жыл бұрын
The ones you took off are way better dude. Your gonna regret this mod and switch them back, mark my words.
@peterroda8156
4 жыл бұрын
Europeans prefer the American lights!
@winner1338
3 жыл бұрын
so you need to buy 4 of them? $84 x 4 = $336 am i correct?
@AdamCroll
3 жыл бұрын
Yes, technically from a&j cycles they came in pairs but yes the end price is close to what you asked.
@winner1338
3 жыл бұрын
@@AdamCroll thank you for your answer. i really love this turn signal but it so expensive.
@Sean-yk2cf
3 жыл бұрын
exactly. the price is insane. lol
@tsmgguy
4 жыл бұрын
Nice video! It looked like a real bowl of wiring spaghetti right at the end, but came out very neat. The 2020 Triumph T120 Ace edition also has the rear blanking plate. Your video should work just as well for installing the same assemblies on that bike.
@russkle2042
7 ай бұрын
Great job, I’m getting some now 👍
@johnpoon8
5 жыл бұрын
Hey Adam, I noticed at the end of your video, it showed a pack of the rizoma turn signal adapters. (Not the plug & play wiring adapters). Are those necessary? Does your hazard lights still function after replacing the turn signals? Thanks
@AdamCroll
5 жыл бұрын
Yes the hazard's still work! I did use the adapters, in the front i installed them on the back side to act as a washer. In the back they were used as intended to cover up the mounting location to hide the ugly plastic mounting surface.
@johnpoon8
5 жыл бұрын
@@AdamCroll thanks for all your help. Im a copy cat of your style. ;)
@barcibus
3 жыл бұрын
I love that you show all the steps. I don't have the guts to try any of this myself yet, but I know where to find a guide when I do. Thanks!!
@felixlechat1780
Жыл бұрын
Are you Tom Cruise brother? 😆
@PaperNeutrino
5 жыл бұрын
Those turn signals look really good. Now I want a motorcycle to tinker on too... and some Crystal Pepsi!
@AdamCroll
5 жыл бұрын
Enduro!
@ShadowCthulhu
2 ай бұрын
dam I remember Crystal Pepsi
@PaulBraddock
5 жыл бұрын
Triumph do smaller diameter, shorter stem versions of the bullet indicators. Not sure why you guys in the US got the ugly bulbous ones. The progressive animation in those rizoma's is really cool though!
@johnsumser9743
5 жыл бұрын
Because I’m the US there is no separate tail light. A really dumb design decision.
@AdamCroll
5 жыл бұрын
The US market always seems to get shafted with euro imports. Like all the BMW’s shipped here in the 70’s & 80’s with the giant diving board bumpers!
@tim_biller
5 жыл бұрын
That’s very cool. Looking very sleek.
@markieell5614
5 жыл бұрын
Rizoma , good quality stuff if a little expensive As you say it’s better than the cheaper options That are out there 🤔, it’s really tidied up the back Of the bike , you any more plans for the speed twin ❓ All the best, Mark 🇬🇧🍺👍🏻
@AdamCroll
5 жыл бұрын
I do have more on the list of upgrades! Stay tuned! 👍🏻
@2tuf4u25
4 жыл бұрын
Hi Adam, thanks for sharing, and the bike looks awesome. I'm planning on doing the same on my 1200XE Scrambler. Question though, why didn't you incorporate the brake light and indicators together? I'm assuming the indicators either don't have that capability or a red LED. Keep the videos coming really enjoy them.
@AdamCroll
4 жыл бұрын
It was just a personal choice, I have never really cared for integrated tail light turn signals. over the years I’ve had a few and most of them felt and looked cheap to me.
@tonymontoya2710
4 жыл бұрын
Great vid.. Love ur videos
@sunnyverghese8232
5 жыл бұрын
Those very slick and trim, good job . Do you know were I can get hold of the repair manual for the new speed twin ? Thanks and keep up the good work!!!
@AdamCroll
5 жыл бұрын
I haven’t found a repair manual for it yet, but I’m sure the Thruxton manual is 95% accurate I’m sure those are readily available!
@pierremartin9048
3 жыл бұрын
Very sharp
@roey600
2 жыл бұрын
Lovely bike
@lasseh1576
5 жыл бұрын
Yes! That looks a lot better!
@sandorvasas611
4 жыл бұрын
I like the speed twin, but I wouln't buy it again. The fact that you need to change literally everything on the bike from incompatible factory shock absorbers, plastic easy-to-break turn signals to the cheap-ass seat they put on it, and each costs a fortune... I'm starting to think it's better to buy a Harley or a touring/adventure bike, even if its ugly, but you don't need to mess with all of this shit. Not to mention my Twin's engine became faulty after riding only 5,000kms. Waiting a fking month to be able to ride again. Triumph... bikes look great, but that's all. you need to replace the complete bike to get something usable.
@Alan-bz1ed
2 жыл бұрын
Looks so much better than the ugly and obtrusive turn signals Triumph Canada and the US put on their bikes. The Euro versions are sweet; low profile and sleek, thanks!
@johnsumser9743
5 жыл бұрын
Man that looks good! I’ll swap mine out as soon as I can order the euro spec light.
@garyking9875
4 жыл бұрын
Hey Adam I was wondering if there were any mounting nuts included with the tail light assembly? I just got mine, there's no mounting nuts on the light and looking at the bike it looks like two bolts that thread into the blanking plate. Any info would be of great help. Keep the vids coming!
@AdamCroll
4 жыл бұрын
Yeah mine did not come with nuts either, I just ran up to the hardware store and bought metric stainless to fit.
@garyking9875
4 жыл бұрын
@@AdamCroll that's what I thought I'd have to do, thanks. Also I got in touch with a dealership in the U.K and have the euro spec turn signals coming in shortly, can't wait to put them on
@khruheber7362
3 жыл бұрын
I did not see you tried turn in your hazards. Did they work?
@AdamCroll
3 жыл бұрын
They do work
@cplegrand
3 жыл бұрын
Hey Adam, trying to do this right now with my Triumph Scrambler, bit ran into a couple issues. Looks like A&J provides the necessary harness for the Speed Twin kit to go from the multifunction lights to whatvyou installed. But with the Scrambler kit, there is no harness. The Euro style tail light isn't compatible with the multifunction harness, so I'm stuck with the whole bike apart. I'm wondering if the Speed Twin harness that came with your kit would work for any of the other 1200 modern classics. Seems like the necessary subharness for the Scrambler simply isn't available anywhere right now. Any idea?
@wandering_armadillo
4 жыл бұрын
I'm of the opinion that if the bike came with these skinny minimalist signals people would be changing them out! Haha, that's the nature of customization "must remove stock components"! But Rizoma will not get my cash, I'm ordering some shorty levers from Pazzo ;)
@tinks43
5 жыл бұрын
Very sleek 👍🏻
@mrlancekink
4 жыл бұрын
Adam, these don’t seem that bright in your video. I’m wondering if it’s just an artifact of the video or the view angle. Can you comment on their brightness relative to stock? Any idea how they compare to the euro-spec LEDs both brightness-wise and visibility off-angle? I’d like to go this route but am a little worried that they aren’t bright enough or only bright when viewed from directly in front/behind. Thanks! Love your videos!
@brandonmcmahan676
3 жыл бұрын
I added these to my 2003 Honda 919 and don't like that they don't have daytime running light functionality. Other than that they are amazing.
@thecappy
5 жыл бұрын
I changed out to the club style lights on my Speedy. For the rear how did you wire it up? I used a cable staple to de-pin the stock female connectors to use on the Rizoma club s.
@AdamCroll
5 жыл бұрын
When switching to the euro taillight the harness comes ready to go, it was plug and play. Rizoma has the adaptors to go from oem triumph to bullet style connectors that the rizoma come with. As stated in the video that was the only extra thing needed to complete the connections.
@thecappy
5 жыл бұрын
@@AdamCroll I used the bullet adapters for the front club style. I missed the part about the wire harness. I'll have to look into it for next time I open mine up.
@ronjosmagicandcostumes2587
4 жыл бұрын
Do you know where to get plugs for the turn signal cancelling module. I do not want to cut into my wires. 2018 triumph speedmaster. Thanks
@joeb84
4 жыл бұрын
What is the difference between the English stop lamp and the U.S version?
@erwinballings9155
5 жыл бұрын
Nice ;-)
@SeaMonkey137
4 жыл бұрын
Idk. I think the stock US multi-function lights are the best I've seen on a modern retro bike. These would look more at home on the Speed Triple R IMO.
@joeb84
4 жыл бұрын
The English stop lamp is so much better 👌🏼
@ericb252
5 жыл бұрын
Awesome but a 360 view would be nice at the end
@pramukh108
4 жыл бұрын
Hey Adam does the stock one lights up when you hit the rear brakes ? Mine doesn’t for some reason not sure if that’s the way with all speed twin or just mine is faulty.
@pramukh108
4 жыл бұрын
I meant the rear brake lights when you hit the rear brakes
@ZfrankieJ26
4 жыл бұрын
Hi Adam! I just wonder if I can install the turn signal without the wiring adaptors? Thank you very much Best,
@AdamCroll
4 жыл бұрын
Adaptors are needed unless you feel safe to cut and splice the wires. Adaptors allow it to be returned back to stock form if you ever needed to.
@andyhill7794
4 жыл бұрын
Where did you get the spacers/plugs for the rear signals?? I’ve been looking and can’t find them.
@AdamCroll
4 жыл бұрын
A&Jcycles.com
@johnsumser9743
5 жыл бұрын
So I have to literally jam the round peg into a square hole. So much for plug and play. (I also did this on a very hot day.)
@AdamCroll
5 жыл бұрын
With the proper wiring adaptors it was plug and play. No jamming of any kind, nice proper snap into place.
@ComputermanAM13
4 жыл бұрын
You should put a novsight motorcycle h4 led in the headlight
@AdamCroll
4 жыл бұрын
I’ll look into that, thanks!
@ComputermanAM13
4 жыл бұрын
@@AdamCroll www.amazon.com/Headlight-Motorcycle-SUPAREE-8000LM-Bright/dp/B07X9XSD71 This one is really good
@EdA-dp3nk
3 жыл бұрын
Adam, thanks for sharing. I was wondering if you had to do any cutting or splicing in your install for the tail light. I just purchase the speed twin 2020 model (which is very similar if not the same) and I want to do a similar thing to my tail light. Thank you in advance for taking the time to answer back.
@AdamCroll
3 жыл бұрын
It was all plug and play, all you should need if you buy new turn signals to go along with the euro tail light kit will be wiring adaptors most places have adaptors designed for most popular turn signal brands. I went to A&J cycles and got the rizoma wiring adaptors, I think they are sold in pairs. You’d need two pairs.
@EdA-dp3nk
3 жыл бұрын
@@AdamCroll much appreciated you taking the time to answer my question, I know we are all busy . Looking forward to your next video.
@vojtakral3155
4 жыл бұрын
Isnt it less visible than those factory lights ?
@AdamCroll
4 жыл бұрын
I’m sure it is slightly, however it’s pretty bright!
@griffin_dexter206
5 жыл бұрын
Any issues reliability wise so far with the Speed Twin? Deciding between this and a HD Roadster and know those are pretty solid. Any input would be great, thanks and keep making the bitchen videos !
@johnsumser9743
5 жыл бұрын
I’ve only had my twin for a month or so (1200 miles) and no problems. I’ve had two previous triumphs and both were great bikes.
@griffin_dexter206
5 жыл бұрын
John Sumser thanks for the info! Any trouble getting parts and are they any pricier than HD?
@AdamCroll
5 жыл бұрын
It’s been a great reliable bike so far! No major issues at all. Just a few minor things but I’m sure Triumph will iron them out pretty quickly. After owning this triumph I’d choose this over a HD any day!
@cholmes1969
5 жыл бұрын
Looks so much nicer with the euro spec tail light, wish the US market also received this set up. Curious though, did the tail light kit also include the rear wiring harness?
@AdamCroll
5 жыл бұрын
Yes it did come with the wiring harness.
@cholmes1969
5 жыл бұрын
@@AdamCroll Thanks much for the response.
@MrXjumpman
3 жыл бұрын
are the front turn signal same with the rear turn singal?
@AdamCroll
3 жыл бұрын
Yes the front and rear are the same.
@MrXjumpman
3 жыл бұрын
@@AdamCroll Thank you for the reply. One more question, Does both front and rear need the adapters or just the front?
@AdamCroll
3 жыл бұрын
The front will need the adaptor pigtail that matches the turn signal brand same as the rear.
@MrXjumpman
3 жыл бұрын
@@AdamCroll Thank you
@vincentk8684
3 жыл бұрын
@@AdamCroll adaptor pigtail?
@jj_infotainment
5 жыл бұрын
I think the old round shaped indicators were good... With these new one the bike lost its classic look
@AdamCroll
5 жыл бұрын
Modern Classic!!
@jj_infotainment
5 жыл бұрын
@@AdamCroll Yes..yes....... modern classic. ..
@ericb252
5 жыл бұрын
The space ship lights?
@johnsumser9743
5 жыл бұрын
The classic Triumphs did not have huge turn sign lights, so what you are talking about is perhaps the symbols of classic bikes rather than the actual classics.
Пікірлер: 103