I just ordered one for my 100v 24s2p Onewheel build! 🔥
@kostaskosta9008
7 ай бұрын
I just bought a couple of them as I believe that's an excellent controller for most of the scooters out there. Next step is the the battery and the tool for them, although the pouch cells aren't that bad these days.
@EEGworld
Жыл бұрын
impressive board! enjoying these reviews. here in the US, these seem like a better value than the Trampa boards.
@de-bodgery
Жыл бұрын
Both are good options
@EEGworld
Жыл бұрын
@@de-bodgery have you seen anything that will handle 75v that's not flipsky that's under 200 and works with VESC?
@de-bodgery
Жыл бұрын
@@EEGworld Flipsky, MakerX, Spintend. Just keep in mind that cheap tends to also mean not very good.
@christophegroulx7816
Жыл бұрын
Nice video! Between this and the new VESC 6 HP from Trampa, which one would you recommend? This would be for a robotics application, so factors such as signal integrity and communication reliability are very important. Thank you and I hope you have a nice day
@de-bodgery
Жыл бұрын
None of the current Trampa controllers are inside sealed shells. You have to put the controller inside something to protect it from the weather. This isn't a problem for Tronic controllers. The side holes for the wires are open, but the shell can be sealed up easily enough with some silicon. All the connectors are inside the shell so there is no issues with getting them polluted with silicon. Parts quality, reliability and build quality will be similar. The current paths for the Trampa controllers are a little bit better, but that's not a huge concern. If you need a really compact controller, it's hard to beat the Trampa for size. If space constraints are not that important, I'd go with the Tronic. Also, the HP controllers are 60v max and the Tronic 250R is 100v max. If you are building for higher voltage or want to do it in the future, the Tronic is the better option. The 100-250 is a closer comparison to the Tronic 250.
@christophegroulx7816
Жыл бұрын
@@de-bodgery Thanks. Seems like for VESC boards up to 10Kw Trampa provides the best quality
@jaken528
Жыл бұрын
Just put a couple 250's on my WKGT
@de-bodgery
Жыл бұрын
What is a WKGT?
@notsoanonymous2458
Жыл бұрын
What was the outcome? I've got a Wolf King GT as well.
@raydonpubgm5233
Жыл бұрын
Do a Macro View
@NoahZimmerman
8 ай бұрын
Do you happen to have an Old Tronic 250 for sale, or know somewhere to get one for cheap? They are a little out of my price range, but I'm looking to buy exactly something like that. Currently have a stormcore 100D but im only using 1 side of it, so it can only do 80 amps.
@de-bodgery
8 ай бұрын
I do have one.
@xBiscuits
7 ай бұрын
what are the MOSFETS used in the tronics250R?
@de-bodgery
7 ай бұрын
I don't know the part number, but Infineon
@helios_ja
Жыл бұрын
@joshua1577
7 ай бұрын
Did you happen to find the capacitors for this?
@de-bodgery
7 ай бұрын
I did
@joshua1577
7 ай бұрын
@@de-bodgery are you able to drop me a link for the correct ones?
@de-bodgery
7 ай бұрын
@@joshua1577 digikey.com or mouser.com will have what you need.
@joshua1577
7 ай бұрын
@@de-bodgery I tried looking it up and I couldn’t find ones with the same 12x25mm dimensions
@de-bodgery
7 ай бұрын
@@joshua1577 keep looking. I usually find what I want if I'm persistent.
@helios_ja
Жыл бұрын
I think one of these 250R videos should be renamed?
@helios_ja
Жыл бұрын
Okay when u do the videos they get uploaded in not the best order so the 250R one was uploaded before the 250 and its been happening a few times now lol
Пікірлер: 27